Slideway Oils - Fluids & Lubricants Cutwel Ltd

Millway 68 Viscosity Sideway Oil (Millers Oils)

Millway is a range of slideway oils with outstanding anti-wear and anti-corrosion properties, as well as the inclusion of a tacky adhesive additive to avoid dripping and provide a tenacious film. Use ...

High lubricity prevents stick-slip of slideways
Outstanding anti wear and anti corrosion properties
Non drip formula highly suitable for the lubrication of vertical surfaces
Careful selection of viscosity means hydraulic performance can be achieved

From £66.00 £55.00

View Products

Mould Oil 1755 (Millers Oils)

A light viscosity hydrocarbon blended with mineral oil and release agent additives to promote good mould separation and minimize creep and surface migration....

Use as received according to the application or mixed as an emulsion for specific mould types. Apply by brush, roller or spray as desired.
Good surface finish.
Good separation properties.
Improved operator acceptability with the addition of a reodourant.
Cost effective.
A light viscosity hydrocarbon blended with mineral oil and release agent additives to promote good mould separation and minimize creep and surface migration.

From £75.66 £63.05

View Products

Mould Oil 2334 Medium Viscosity (Millers Oils)

Mould Oil 2334 is a medium viscosity mould release oil for fine finish products....

Excellent surface finish
For fine finish products
Excellent mould separation
Suitable for a variety of moulds

From £78.44 £65.37

View Products

Mould Oil 2437 (Millers Oils)

A low viscosity mould oil formulated from a single base oil and an additive system ideal for effective mould oil release, primarily concrete and ceramic....

Use as received according to the application or mixed as an emulsion for specific mould types. Apply by brush, roller or spray as desired.
Ease of application plus enhanced mould release for blemish free products.
Readily biodegradable.
Suitable for a variety of moulds.
Mould Oil 2437 is a biodegradable, low viscosity mould release oil for fine finish products.
Mould Oil 2437 can be safely used with plastic, metal and rubber moulds and is particularly suitable for situations where an excellent finish is desired.
Can be applied by brush, roller or spray.
A low viscosity mould oil formulated from a single base oil and an additive system ideal for effective mould oil release, primarily concrete and ceramic.

From £85.62 £71.35

View Products

RENEP CGLP 68 Slideway Oil (FUCHS)

The RENEP C range has been specifically designed to meet the modern requirements of machine tool slideways. Excellent lubricity under high pressure working conditions. Contains EP additives for improv...

RENEP CGLP 68 Slideway Oil
Excellent lubricity under high pressure working conditions
Contains EP additives for improved performance under challenging application conditions
Anti-wear additives to maximise machine tool life
Lubricates and flows freely even at very low temperatures
Wide range of viscosities available to suit most applications

From £82.80 £69.00

View Products

Millway 220 Viscosity Slideway Oils (Millers Oils)

Millway is a range of slideway oils with outstanding anti-wear and anti-corrosion properties, as well as the inclusion of a tacky adhesive additive to avoid dripping and provide a tenacious film. Use ...

High lubricity prevents stick-slip of slideways
Anti-wear protection
Excellent corrosion protection
Can be used in sub zero temperatures

From £72.28 £60.23

View Products

Mould Oil 1954 (Millers Oils)

A blend of low volatility solvent carrier and base oil with additive treatment to assist with release properties....

Use as received according to the application or mixed as an emulsion for specific mould types. Apply by brush, roller or spray as desired.
Good surface finish.
Good separation properties.
Improved operator acceptability with the addition of a reodourant.
Cost effective.
A blend of low volatility solvent carrier and base oil with additive treatment to assist with release properties.

From £85.07 £70.89

View Products

Millway 220 Sideway Oil (Millers Oils)

Millway is a range of slideway oils with outstanding anti-wear and anti-corrosion properties, as well as the inclusion of a tacky adhesive additive to avoid dripping and provide a tenacious film. Use ...

High lubricity prevents stick-slip of slideways
Outstanding anti wear and anti corrosion properties
Non drip formula highly suitable for the lubrication of vertical surfaces
Careful selection of viscosity means hydraulic performance can be achieved

From £83.03 £69.19

View Products