This screw extractor is for right-hand threads. It is used for removing broken screws, threaded pins and pipe ends. Individual screw extractor thread size from M4-M45....
For removing broken screws, threaded pins and pipe ends
54-56 HRC
Rolled thread
Ground shaft
Only screws with a right-hand thread can be unscrewed
This internal extractor is for extracting ball bearings, ball bearing outer rings and bushings. It can be used with slide hammer or counterpart but not suitable for shaft-mounted bearings. Bearings se...
Can be used with slide hammer or counterpart
Not suitable for shaft-mounted bearings
For extracting ball bearings, ball bearing outer rings and bushings
Bearings seated close to the back wall of the casing are securely gripped by the sharp projections on the shells
This 2-legged extractor is for extracting washers, wheels, ball bearings by clamping on the outer surface of the component. With self-centring puller hooks (screwed), less working area is required....
This stud extractor set from Kukko contains 25 pieces, designed for removing broken screws, threaded pins and pipe ends. Made in Germany, this set is supplied in a special foam for secure storage....
Universal set for turning off out worn bolts, etc
Set of drill bits and drill bushings
In robust case with foam inlay
Easy to remove the damaged bolt precisely, without damaging the thread
This stud extractor set is for pulling and extracting threaded parts, e.g. tapered and cylindrical pins. It contains M4, 5, 6, 8, 10, 12 screws and washers.
...
For pulling and extracting threaded parts, e.g. tapered and cylindrical pins
This 3-legged extractor is for safe internal and external extraction of washers, wheels and ball bearings. With hook stops to secure against unwanted slippage, this extractor has a secure hold and cen...
For safe internal and external extraction of washers, wheels, ball bearings
Strong, drop-forged design for key actuation
Can be used as external and internal extractor
Secure hold and centred pulling thanks to the even load distribution
With hook stop to secure against unwanted slippage; pressing the button moves the hook
This 3-legged extractor is for safe extraction of washers, wheels and ball bearings. With an even load distribution and self-clamping hooks, there's secure hold on the part being removed thanks to thr...
For safe extraction of washers, wheels, ball bearings
Strong and practical
For key actuation
Self-clamping hooks
Even load distribution and particularly secure hold on the part being removed thanks to three puller hooks
This hexagon screw extractor set contains 17 pieces. With spiral drill bits, this set increases your efficiency for thread-conserving removal of screws without damage. Can be used for applications in ...
1x Screw extractor drill (1 of each size): 2.3, 2.8, 3.4, 4.5, 5.7, 6.8, 9, 11mm
1x Screw extractor (1 of each size): 2, 2.5, 3, 4, 5, 6, 8, 10mm
This stud extractor set from Kukko contains 4 pieces, designed for extracting stud bolts or torn parts in a set. Made in Germany, this set can be used in cramped spaces and has an extra large working ...
4-piece set - For extraction of stud bolts or broken off components
Used expressly for removing broken or seized screws. They are left-handed, for use on right-handed threads. The screw is first drilled out to the proper diameter for that extractor. The extractor is t...
Used expressly for removing broken or seized screws
They are left-handed, for use on right-handed threads
The screw is first drilled out to the proper diameter for that extractor
The extractor is then inserted into this hole and turned counter-clockwise
