Standard Series Vices | Work Holders Supplier | Cutwel Ltd
Call Us Now:
01924 869660
Currency:

Tooling Supplier

for the UK & Ireland

Monday-Friday 8am-6pm

Gerardi Standard Series Machine Vice & Accessories

New GRIP Jaw plates for ultra-secure clamping, ideal for through hole drilling/tapping

FIXED JAW WITH 5mm STEP ON THE REAR (REVERSIBLE)

for use with prismatic and stepped movable jaws

The Gerardi Standard Series - The Most Copied Machine Vice In the World.

Gerardi STANDARD SERIES Features

Suitable for the smallest machine shop to the biggest machining centres, Standard Series vices are a must for every machine shop. Case hardened to HRc60 and all working surfaces ground within +/-0.02mm (overall accuracy), Gerardi vices are guaranteed for 5 years. No other mechanical vice offers the same clamping forces and rigidity, with just a 1/4 turn of the wrench required to full tighten then vice.

HIGHEST REPOSITIONING ACCURACY

with perfectly square workpieces

MECHANICAL CLAMPING

EXTREME FORCE up to 50kN!

JAW HOLES FOR SPECIAL APPLICATIONS

4 extra tapped holes over the jaws for special Gerardi stack type jaw application

INCREASED MAX OPENING

4 extra tapped holes over the jaws for special Gerardi stack type jaw application

INCREASED MAX OPENING

4 extra tapped holes with ground back jaw rear face increase maximum opening capacity with the addition of jaw extensions

GROUND CROSS KEYWAYS

The base features ground cross keyways on the base and fixed jaw for immediate and accurate horizontal or vertical positioning. No need to clock the vice jaws up when repositioning the vice.

Gerardi STANDARD FLEX Features

The innovative STANDARD FLEX machine vice from Gerardi features the same advantages as Standard Series vices, but with the added benefit or QUICK HAND CHANGE jaw plates. The quick change comb system allows for jaw changeovers in under 5 seconds.

HIGHEST REPOSITIONING ACCURACY

with perfectly square workpieces

PULL DOWN ACTION

Increased & better pull down action with better protection from swarf chips thanks to the comb system

HUGE CHOICE OF PRECISION SPARE QUICK CHANGE JAWS

Reduce set-up times and increase precision with spare jaws for just about any appplication - changeable in under 5 seconds!

The World's Biggest Range of Modular Jaws

The Gerardi Standard Series and Standard Flex machine vices are copied all over the world, but no imitation vice offers the same precision, clamping force, modularity and rigidity. Clamping possibilities are endless through the huge range of modular spares. Set-up times are ultra fast from quick alignment on the machine table to setting the job on the vice. Suitable for the smallest machine shop to the biggest machining centres, Standard Series vices are a must for every machine shop.

Insert Grip Jaw Plates

Perfect Height Matching

Gerardi vices can be used in a pair or a row without the need for additional grinding. The base and jaws are ground within 20 microns, giving a maximum tolerance of +/-0.02mm

Extreme Clamping Forces With Mechanical Clamping

The following diagrams give the clamping force that can be obtained with each vice (size 1 to 6) depending on the torque.

Clamping Options

All Standard Series or Standard Flex vices can be retrofitted or supplied as new with hydraulic or hydro-pneumatic clamping options.