A+ Aluminium Milling System Highlights & Promotions | Cutwel

2 Flute Lapped 50 Degree Helix Carbide A+ Aluminium End Mill - APFE2 (Korloy)

The Korloy APFE2 series A+ mirror finish aluminum cutter has 2 flutes and a plain shank. These end mills range in diameter from 2.5mm-20mm and are made from a micrograin carbide substrate. The A+ rang...

Suitable for high speed machining of aluminium and other non-ferrous materials.

Special geometries & lapped flutes ensures the best chip control and surface finish on aluminium.

U-Shaped flute design for extreme quality surface finish.

Deep flute pockets prevent swarf clogging up the tool.

High rigidity on the cutting edge ensures high productivity.

Micrograin Carbide Substrate.

Excellent chip evacuation even in high feed machining.

Size

Diameter (mm)	2.5 - 20
Overall Length (mm)	50 - 100
Flute Length (mm)	8 - 45
Shank (mm)	6 - 20

From £33.67 £28.06

View Products

2 Flute Lapped 50 Degree Helix Carbide Long Length A+ Aluminium End Mill - APLFE2 (Korloy)

The Korloy APLFE2 series A+ mirror finish aluminum cutter has 2 flutes and a plain shank. These long length end mills range in diameter from 2.5mm-20mm and are made from a micrograin carbide substrate...

Suitable for high speed machining of aluminium and other non-ferrous materials.

Special geometries & lapped flutes ensures the best chip control and surface finish on aluminium.

U-Shaped flute design for extreme quality surface finish.

Deep flute pockets prevent swarf clogging up the tool.

High rigidity on the cutting edge ensures high productivity.

Micrograin Carbide Substrate.

Excellent chip evacuation even in high feed machining.

Size

Diameter (mm)	3 - 20
Overall Length (mm)	60 - 150
Flute Length (mm)	12 - 75
Shank (mm)	6 - 20

From £34.46 £28.72

View Products

3 Flute Lapped 50 Degree Helix Carbide A+ Aluminium End Mill - APFE3 (Korloy)

The Korloy APFE3 series A+ mirror finish aluminum cutter has 3 flutes and a plain shank. These end mills range in diameter from 2.5mm-20mm and are made from a micrograin carbide substrate. The A+ rang...

Suitable for high speed machining of aluminium and other non-ferrous materials.

Special geometries & lapped flutes ensures the best chip control and surface finish on aluminium.

U-Shaped flute design for extreme quality surface finish.

Deep flute pockets prevent swarf clogging up the tool.

High rigidity on the cutting edge ensures high productivity.

Micrograin Carbide Substrate.

Excellent chip evacuation even in high feed machining.

Size

Diameter (mm)	2.5 - 20
Overall Length (mm)	50 - 100
Flute Length (mm)	8 - 45
Shank (mm)	6 - 20

From £33.67 £28.06

View Products

3 Flute Lapped 50 Degree Helix Carbide Long Length A+ Aluminium End Mill - APLFE3 (Korloy)

The Korloy APLFE3 series A+ mirror finish aluminum cutter has 3 flutes and a plain shank. These long length end mills range in diameter from 2.5mm-20mm and are made from a micrograin carbide substrate...

Suitable for high speed machining of aluminium and other non-ferrous materials.

Special geometries & lapped flutes ensures the best chip control and surface finish on aluminium.

U-Shaped flute design for extreme quality surface finish.

Deep flute pockets prevent swarf clogging up the tool.

High rigidity on the cutting edge ensures high productivity.

Micrograin Carbide Substrate.

Excellent chip evacuation even in high feed machining.

Size

Diameter (mm)	3 - 20
Overall Length (mm)	60 - 150
Flute Length (mm)	12 - 75
Shank (mm)	6 - 20

From £34.46 £28.72

View Products

3 Flute Lapped 45 Degree Helix Carbide A+ Aluminium Ripper - APRE (Korloy)

The Korloy APRE series A+ mirror finish aluminum cutter has 2 flutes and a plain shank. These roughers range in diameter from 2.5mm-20mm and are made from a micrograin carbide substrate. The A+ range ...

Suitable for high speed roughing of aluminium and other non-ferrous materials.

Special geometries & lapped flutes ensures the best chip control and surface finish on aluminium..

Deep flute pockets prevent swarf clogging up the tool.

High rigidity on the cutting edge ensures high productivity.

Roughing geometry prevents built up edge.

Micrograin Carbide Substrate.

Excellent chip evacuation even in high feed machining.

Size

Diameter (mm)	4 - 25
Overall Length (mm)	50 - 105
Flute Length (mm)	8 - 50
Shank (mm)	6 - 25

From £40.73 £33.94

View Products

2 Flute Lapped 25 Degree Helix Carbide Ball Nose A+ Aluminium End Mill - APBE (Korloy)

The Korloy APRE series A+ mirror finish aluminum cutter has 2 flutes, a plain shank and a ball nosed end. These end mills range in diameter from 2.5mm-20mm and are made from a micrograin carbide subst...

Suitable for high speed roughing of aluminium and other non-ferrous materials.

Special geometries & lapped flutes ensures the best chip control and surface finish on aluminium..

Deep flute pockets prevent swarf clogging up the tool.

High rigidity on the cutting edge ensures high productivity.

Ball Nosed geometry.

Micrograin Carbide Substrate.

Excellent chip evacuation even in high feed machining.

Size

Diameter (mm)	1 - 12
Overall Length (mm)	50 - 75
Flute Length (mm)	2 - 24
Shank (mm)	4 - 12

From £31.19 £25.99

View Products