Tap Set includes sizes: M3, M4, M5, M6, M8, M10, M12. Prime-X YG-1 Premium HSS-PM Machine Taps have a unique X-coating and a tough chip resistant cutting edge which provide ultra long tool life, high ...
Tap Set includes sizes: M3, M4, M5, M6, M8, M10, M12
Metric Coarse Prime-X Universal Plus Machine Tap
New YG-1 X-coating provides high heat and wear resistance
Premium Powder Metal Substrate with tough-chipping resistant cutting edge
For High Performance Purpose Tapping on Steel, Stainless Steel, Cast Iron & Non-Ferrous
Special thread structure for the reduction of torque, wear and risk of overfeeding
Unrestricted chip flow as a result of the optimised combination of substrate, coating and geometry
Orion Metric Coarse Tap & Die sets contain an assortment of hand taps (taper, second and third) plus tap wrench and thread gauge. For producing metric threads by hand in blind holes and through holes....
Sets contain an assortment of hand taps (taper, second and third) plus tap wrench and thread gauge.
For producing metric threads by hand in blind holes and through holes.
Suitable for use on steel, non-ferrous metals and (cast-iron) material groups up to a strength of 1000 N/mm².
This threading turning set contains 1 x internal or external 20mm shank internal holder and 10 inserts. ...
Set contains 1 each inserts in A60, G60 (partial profile), 11W, 14W, 1.0ISO, 1.25ISO, 1.5ISO, 2.0ISO, 2.5ISO, 3.0ISO in internal or external (10pcs in total)
Multipurpose coated grade VTX
Holder includes 1 x internal or external 20mm shank internal holder
Recoil PRO XL Series wire thread repair kits are available with thread repair inserts, combo tap and installation tool, magnetic tang break tool, intermediate tap and HSS drill (Kits M14 and above do ...
Metric Wire thread repair kit
Made by Recoil
Set includes thread repair inserts, combo tap and installation tool, magnetic tang break tool, intermediate tap and HSS drill
Tap Set includes sizes: M3, M4, M5, M6, M8, M10, M12. Prime-X YG-1 Premium HSS-PM Machine Taps have a unique X-coating and a tough chip resistant cutting edge which provide ultra long tool life, high ...
Tap Set includes sizes: M3, M4, M5, M6, M8, M10, M12
Metric Coarse Prime-X Universal Plus Machine Tap
New YG-1 X-coating provides high heat and wear resistance
Premium Powder Metal Substrate with tough-chipping resistant cutting edge
For High Performance Purpose Tapping on Steel, Stainless Steel, Cast Iron & Non-Ferrous
Special thread structure for the reduction of torque, wear and risk of overfeeding
Unrestricted chip flow as a result of the optimised combination of substrate, coating and geometry
The 7 Piece Solid Carbide Drill Set to Remove Broken Taps comes with tap sizes M3, M4, M5, M6, M8, M10 and M12. It has a special hardcoat coating which helps achieve excellent results when tapping due...
Set Includes: M3, M4,M5, M6, M8, M10 and M12
Hexagonal and cylindrical shank drilling for use on NC machines as well as on manual machines with three or four-jaw chucks
TiAlN coated
Special Hardcoat coating achieves excellent results when tapping due to its high hardness and yet elastic layer structure
1–5 taps can be remove with one drill to remove jammed taps
This internal extractor is for extracting ball bearings, rings and bushings. Complete with a M10 connection thread and supplied with a slide hammer with 1.7 kg impact weight for easy extraction and co...
For extracting ball bearings, rings and bushings
Set of 4 internal extractors and slide hammer with 1.7 kg impact weight
Recoil PRO XL Series wire thread repair kits are available with thread repair inserts, combo tap and installation tool, magnetic tang break tool, intermediate tap and HSS drill (Kits 9/16" and above d...
UNC Wire thread repair kit
Made by Recoil
Set includes thread repair inserts, combo tap and installation tool, magnetic tang break tool, intermediate tap and HSS drill
Used expressly for removing broken or seized screws. They are left-handed, for use on right-handed threads. The screw is first drilled out to the proper diameter for that extractor. The extractor is t...
Used expressly for removing broken or seized screws
They are left-handed, for use on right-handed threads
The screw is first drilled out to the proper diameter for that extractor
The extractor is then inserted into this hole and turned counter-clockwise
Orion Solid Die Set includes 1 of each M3, M4, M5, M6, M8, M10 & M12 circular solid dies, with a 6g tolerance. For tapping metric male threads. Suitable for steel & NF metal material groups up to a st...
Includes 1 of each M3, M4, M5, M6, M8, M10 & M12 circular solid dies
Tolerance 6g
For tapping metric male threads
For steel & NF metal material groups up to a strength of 700 N/mm²
This hexagon screw extractor set contains 17 pieces. With spiral drill bits, this set increases your efficiency for thread-conserving removal of screws without damage. Can be used for applications in ...
1x Screw extractor drill (1 of each size): 2.3, 2.8, 3.4, 4.5, 5.7, 6.8, 9, 11mm
1x Screw extractor (1 of each size): 2, 2.5, 3, 4, 5, 6, 8, 10mm
This puller set contains 11 pieces. It is for internal and external extraction and comes with a range of clamping depths. With forged traverses and pull-out hooks, this set has a maximum clamping dept...
11 piece set in a case
For internal and external extraction with a range of clamping depths
Forged traverses and pull-out hooks
Made in Germany
Maximum clamping depth: 250mm
Maximum clamping width: 80-170mm
One 2- and one 3-arm traverse, 2 spindles and 3 narrow pull-out hooks in each of 3 lengths 100/200/250mm. Clamping depths up to 250mm. Maximum external clamping width 130mm, internal 170mm
This stud extractor set from Kukko contains 25 pieces, designed for removing broken screws, threaded pins and pipe ends. Made in Germany, this set is supplied in a special foam for secure storage....
Universal set for turning off out worn bolts, etc
Set of drill bits and drill bushings
In robust case with foam inlay
Easy to remove the damaged bolt precisely, without damaging the thread
Recoil PRO XL Series wire thread repair kits are available with thread repair inserts, combo tap and installation tool, magnetic tang break tool, intermediate tap and HSS drill (Kits 9/16" and above d...
UNF Wire thread repair kit
Made by Recoil
Set includes thread repair inserts, combo tap and installation tool, magnetic tang break tool, intermediate tap and HSS drill
