YG-1 Power E-Hydro Chucks from only £99 - Highlights & Promotions Cutwel Ltd

SK40 Power E-Hydro Hydraulic Chuck 25,000RPM G2.5 (YG-1)

SK40 YG-1 POWER E-HYDRO Toolholders give up to 300% more tool life than ER Collet Chucks with up to 900Nm clamping force. Perfect surface finish is achieved with no chatter marks and minimum noice whi...

SK40 back end type.
AD/B through coolant type.
3 micron run-out accuracy, balanced to 25,000RPM.
Either 50mm or 64.5mm gauge length.
The Ultimate Hydraulic Toolholder For Milling, Drilling and Reaming.
Up to 300% more tool life than ER Collet Chucks.
Up to 900Nm clamping force.
High torque transmission is guaranteed using hydraulic clamping technology.
Optimal radial rigidity from a compact and robust toolholder body, avoids lateral deflection during metal cutting.
Can be used with reduction sleeves or the tool can be clamped directly in the holder.
HSS and carbide shanks in plain, weldon or whistle notch can be clamped.
Perfect surface finish – no chatter marks.
Push feed rates up to 30% higher.
Change cutting tool in seconds with 3 micron repeatability.
Compact design.
Suitable for through coolant tools.

Size

Diameter (mm)	12 - 20

From £153.28 £127.73

View Products

BT40 Power E-Hydro Hydraulic Chuck Kit - (YG-1)

BT40 YG-1 POWER E-HYDRO Toolholders give up to 300% more tool life than ER Collet Chucks with up to 900Nm clamping force. Perfect surface finish is achieved with no chatter marks and minimum noise whi...

The Ultimate Hydraulic Toolholder For Milling, Drilling and Reaming
Up to 300% more tool life than ER Collet Chucks
Sleeves included: 1 x 6,8,10,12 &16mm
Up to 900Nm clamping force
Perfect surface finish – no chatter marks
Push feed rates up to 30% higher
Minimum noise
Change cutting tool in seconds with 3 micron repeatability
3 micron run-out accuracy, balanced to 25,000RPM
Contains 20mm BT40 toolholder
Compact design
Suitable for through coolant tools

Size

Diameter (mm)	20 - 20

From £397.86 £331.55

View Products

BT50 Power E-Hydro Hydraulic Chuck 25,000RPM G2.5 (YG-1)

BT50 YG-1 POWER E-HYDRO Toolholders give up to 300% more tool life than ER Collet Chucks with up to 900Nm clamping force. Perfect surface finish is achieved with no chatter marks and minimum noice whi...

BT50 back end type.
AD/B through coolant type.
3 micron run-out accuracy, balanced to 25,000RPM.
Either 83.5mm or 90mm gauge length.
The Ultimate Hydraulic Toolholder For Milling, Drilling and Reaming.
Up to 300% more tool life than ER Collet Chucks.
Up to 900Nm clamping force.
High torque transmission is guaranteed using hydraulic clamping technology.
Optimal radial rigidity from a compact and robust toolholder body, avoids lateral deflection during metal cutting.
Can be used with reduction sleeves or the tool can be clamped directly in the holder.
HSS and carbide shanks in plain, weldon or whistle notch can be clamped.
Perfect surface finish – no chatter marks.
Push feed rates up to 30% higher.
Change cutting tool in seconds with 3 micron repeatability.
Compact design.
Suitable for through coolant tools.

Size

Diameter (mm)	12 - 32

From £153.28 £127.73

View Products

SK50 Power E-Hydro Hydraulic Chuck 25,000RPM G2.5 (YG-1)

SK50 YG-1 POWER E-HYDRO Toolholders give up to 300% more tool life than ER Collet Chucks with up to 900Nm clamping force. Perfect surface finish is achieved with no chatter marks and minimum noice whi...

SK50 back end type.
AD/B through coolant type.
3 micron run-out accuracy, balanced to 25,000RPM.
Either 64.5mm or 81mm gauge length.
The Ultimate Hydraulic Toolholder For Milling, Drilling and Reaming.
Up to 300% more tool life than ER Collet Chucks.
Up to 900Nm clamping force.
High torque transmission is guaranteed using hydraulic clamping technology.
Optimal radial rigidity from a compact and robust toolholder body, avoids lateral deflection during metal cutting.
Can be used with reduction sleeves or the tool can be clamped directly in the holder.
HSS and carbide shanks in plain, weldon or whistle notch can be clamped.
Perfect surface finish – no chatter marks.
Push feed rates up to 30% higher.
Change cutting tool in seconds with 3 micron repeatability.
Compact design.
Suitable for through coolant tools.

Size

Diameter (mm)	20 - 32

From £231.28 £192.73

View Products

HSK63A Power E-Hydro Hydraulic Chuck 25,000RPM G2.5 (YG-1)

HSK63A YG-1 POWER E-HYDRO Toolholders give up to 300% more tool life than ER Collet Chucks with up to 900Nm clamping force. Perfect surface finish is achieved with no chatter marks and minimum noice w...

HSK63A back end type.
AD/B through coolant type.
3 micron run-out accuracy, balanced to 25,000RPM.
80mm gauge length.
The Ultimate Hydraulic Toolholder For Milling, Drilling and Reaming.
Up to 300% more tool life than ER Collet Chucks.
Up to 900Nm clamping force.
High torque transmission is guaranteed using hydraulic clamping technology.
Optimal radial rigidity from a compact and robust toolholder body, avoids lateral deflection during metal cutting.
Can be used with reduction sleeves or the tool can be clamped directly in the holder.
HSS and carbide shanks in plain, weldon or whistle notch can be clamped.
Perfect surface finish – no chatter marks.
Push feed rates up to 30% higher.
Change cutting tool in seconds with 3 micron repeatability.
Compact design.
Suitable for through coolant tools.

Size

Diameter (mm)	12 - 20

From £179.65 £149.71

View Products

HSK100A Power E-Hydro Hydraulic Chuck 25,000RPM G2.5 (YG-1)

HSK100A YG-1 POWER E-HYDRO Toolholders give up to 300% more tool life than ER Collet Chucks with up to 900Nm clamping force. Perfect surface finish is achieved with no chatter marks and minimum noice ...

HSK100A back end type.
AD/B through coolant type.
3 micron run-out accuracy, balanced to 25,000RPM.
Either 90mm or 100mm gauge length.
The Ultimate Hydraulic Toolholder For Milling, Drilling and Reaming.
Up to 300% more tool life than ER Collet Chucks.
Up to 900Nm clamping force.
High torque transmission is guaranteed using hydraulic clamping technology.
Optimal radial rigidity from a compact and robust toolholder body, avoids lateral deflection during metal cutting.
Can be used with reduction sleeves or the tool can be clamped directly in the holder.
HSS and carbide shanks in plain, weldon or whistle notch can be clamped.
Perfect surface finish – no chatter marks.
Push feed rates up to 30% higher.
Change cutting tool in seconds with 3 micron repeatability.
Compact design.
Suitable for through coolant tools.

Size

Diameter (mm)	20 - 32

From £274.40 £228.67

View Products

SK40 Power E-Hydro Hydraulic Chuck Kit - (YG-1)

SK40 YG-1 POWER E-HYDRO Toolholders give up to 300% more tool life than ER Collet Chucks with up to 900Nm clamping force. Perfect surface finish is achieved with no chatter marks and minimum noice whi...

The Ultimate Hydraulic Toolholder For Milling, Drilling and Reaming
Up to 300% more tool life than ER Collet Chucks
Sleeves included: 1 x 6,8,10,12 &16mm
Up to 900Nm clamping force
Perfect surface finish – no chatter marks
Push feed rates up to 30% higher
Minimum noise
Change cutting tool in seconds with 3 micron repeatability
3 micron run-out accuracy, balanced to 25,000RPM
Contains 20mm BT40 toolholder
Compact design
Suitable for through coolant tools

Size

Diameter (mm)	20 - 20

From £397.86 £331.55

View Products

BT50 Power E-Hydro Hydraulic Chuck 25,000RPM G2.5 (YG-1)

BT50 YG-1 POWER E-HYDRO Toolholders give up to 300% more tool life than ER Collet Chucks with up to 900Nm clamping force. Perfect surface finish is achieved with no chatter marks and minimum noice whi...

BT50 back end type.
AD/B through coolant type.
3 micron run-out accuracy, balanced to 25,000RPM.
Either 83.5mm or 90mm gauge length.
The Ultimate Hydraulic Toolholder For Milling, Drilling and Reaming.
Up to 300% more tool life than ER Collet Chucks.
Up to 900Nm clamping force.
High torque transmission is guaranteed using hydraulic clamping technology.
Optimal radial rigidity from a compact and robust toolholder body, avoids lateral deflection during metal cutting.
Can be used with reduction sleeves or the tool can be clamped directly in the holder.
HSS and carbide shanks in plain, weldon or whistle notch can be clamped.
Perfect surface finish – no chatter marks.
Push feed rates up to 30% higher.
Change cutting tool in seconds with 3 micron repeatability.
Compact design.
Suitable for through coolant tools.

Size

Diameter (mm)	20 - 32

From £231.28 £192.73

View Products