General Purpose HSS Drills

Gold-P TiN Coated HSS 5 Percent Cobalt 5xD Jobber Drill - DLGP195 (YG-1)

The DLGP195 series Gold-P jobber drills are a best selling HSS drill in the Cutwel range. These 5 Percent cobalt drills have a TiN coating working area and the higher cobalt content reduces cost and i...

TiN Coating on working area with 5% Cobalt content reduces cost and increases tool life compared to standard HSS drill
Normal point up to 1.6mm, split point over 1.6mm forÂ higherÂ accuracy drilling
General purpose drill for Steel, Stainless Steel, Titanium and Inconel
Cutwel's BEST SELLING Drill
The most economic coated drill in our range

Diameter (mm)	1 - 13
Overall Length (mm)	34 - 151
Flute Length (mm)	12 - 101
Shank (mm)	1 - 13

From £3.68 £3.07

View Products

TiN Coated HSS 8 Percent Cobalt 3xD Stub Drill - D4107 (YG-1)

The D4107 series stub drills feature a HSS 8 Percent cobalt substrate for far greater tool life and performance over HSS or HSS 5 Percent cobalt drills, especially in harder wearing materials. These T...

3xD Stub Drill.
Made from a HSS substrate with an 8% cobalt content.
TiN coated.
Suitable for machining Steels
Great tool life and performance with low hardness steels, cast iron & aluminium compared to standard HSS drills due to 8% Cobalt content.
Also suitable for stainless steel, inconel and titanium.
TiN coating on the full length of the flutes.
Normal point up to 1.6mm, split point over 1.6mm for higher accuracy drilling.

Diameter (mm)	1 - 16
Overall Length (mm)	26 - 125
Flute Length (mm)	6 - 81
Shank (mm)	1 - 16

From £4.18 £3.48

View Products

Uncoated HSS 8 Percent Cobalt 10xD Extra Long Drill - D2104 (YG-1)

The D2104 series are an uncoated style long length drill made from HSS 8 Percent Cobalt for increased tool life compared to standard HSS drills. Ideal for low hardness steels, cast iron and aluminium....

10xD Long Length Drill.
Made from a HSS substrate with an 8% cobalt substrate.
Bright finish for aluminium drilling.
Suitable for machining Steel
Great tool life and performance compared to HSS drills due to 8% Cobalt content.
Ideal for low hardness steels, cast iron & aluminium.
Also suitable for stainless steel, inconel and titanium.
Normal point up to 1.6mm, split point over 1.6mm for higher accuracy drilling.

Diameter (mm)	2 - 12
Overall Length (mm)	85 - 205
Flute Length (mm)	56 - 134
Shank (mm)	2 - 12

From £7.93 £6.61

View Products

TiN Coated HSS 8 Percent Cobalt 5xD Jobber Drill - D4105 (YG-1)

The D4107 series jobber drills feature a HSS 8 Percent cobalt substrate for far greater tool life and performance over HSS or HSS 5 Percent cobalt drills, especially in harder wearing materials. These...

5xD Stub Drill.
Made from a HSS substrate with an 8% cobalt content.
TiN coated.
Suitable for machining Steels
Great tool life and performance with low hardness steels, cast iron & aluminium compared to standard HSS drills due to 8% Cobalt content.
Also suitable for stainless steel, inconel and titanium.
TiN coating on the full length of the flutes.
Normal point up to 1.6mm, split point over 1.6mm for higher accuracy drilling.

Diameter (mm)	1 - 16
Overall Length (mm)	34 - 178
Flute Length (mm)	12 - 120
Shank (mm)	1 - 16

From £4.36 £3.63

View Products

Black Oxide Finish HSS 5xD Jobber Drill - D1105 (YG-1)

The D1105 series YG-1 HSS Jobber Drills have a black oxide finish (2mm and above, bright finish under 2mm). These low budget drills are ideal for general purpose drilling of steel, alloyed and un-allo...

5xD Jobber Drill.
Made from a HSS substrate.
Steam Tempered.
Suitable for machining Steels
Low cost budget drill.
Steam Tempered (Black Oxide finish, bright finish under 2mm).

Diameter (mm)	0.3 - 20
Overall Length (mm)	19 - 205
Flute Length (mm)	3 - 140
Shank (mm)	0.3 - 20

From £1.01 £0.84

View Products

Black Oxide Finish HSS 15xD Extra Long Drill - D1121 (YG-1)

The D1121 series YG-1 HSS Drills are extra long length, 15xD. These are a low cost budget drill with a steam tempered block oxide finish. Ideal for general purpose deep hole drilling in steel, non-all...

15xD Extra Long Length Drill.
Made from a HSS substrate.
Steam Tempered.
Suitable for machining Steels
Low cost budget drill.
Extra long for deep hole drilling.
Steam Tempered (Black Oxide finish, bright finish under 2mm).

Diameter (mm)	2 - 13
Overall Length (mm)	125 - 295
Flute Length (mm)	85 - 205
Shank (mm)	2 - 13

From £9.82 £8.18

View Products

Uncoated HSS 8 Percent Cobalt 5xD Jobber Drill - D2105 (YG-1 )

The D2105 series are an uncoated style jobber length drill made from HSS 8 Percent Cobalt for increased tool life compared to standard HSS drills. Ideal for low hardness steels, cast iron and aluminiu...

5xD Jobber Drill.
Made from a HSS substrate with an 8% cobalt substrate.
Bright finish for aluminium drilling.
Suitable for machining Steel
Great tool life and performance compared to HSS drills due to 8% Cobalt content.
Ideal for low hardness steels, cast iron & aluminium.
Also suitable for stainless steel, inconel and titanium.
Normal point up to 1.6mm, split point over 1.6mm for higher accuracy drilling.

Diameter (mm)	1 - 20
Overall Length (mm)	34 - 205
Flute Length (mm)	12 - 140
Shank (mm)	1 - 20

From £2.45 £2.04

View Products

HSS Straight 1/2" Reduced Shank Blacksmith's Drill - 08610 Series (Presto)

General-purpose drill with tensile strength up to 1000N/mm². Reduced parallel 1/2” shank generally for use in hand drills....

HSS Straight 1/2" Reduced Shank Blacksmith's Drill
h8 Tolerance
General-purpose drill with tensile strength up to 1000N/mm²
Cast steel, grey cast iron, malleable cast iron, nickel brass and graphite
Reduced parallel 1/2” shank generally for use in hand drills.
Presto tools are a household name in the cutting tool industry

Diameter (mm)	13 - 38.1
Overall Length (mm)	151 - 151
Flute Length (mm)	79 - 79
Shank (mm)	12.7 - 12.7

From £22.96 £19.13

View Products

Super-GP HSS 5xD Jobber Steam Tempered Drill - DSH105 (YG-1)

The DSH105 series YG-1 Super GP Drills have a special HSS substrate that improves toughness and wear resistance as well as dramatically extending tool life. These are steam tempered (black oxide finis...

5xD Jobber Drill.
Made from a super HSS substrate.
Steam Tempered (Black Oxide Finish).
Suitable for machining Steel
Cobalt tool life, HSS price.
Special HSS improves toughness and wear resistance as well as dramatically extending tool life.
Can work well in good or bad machining conditions.

Diameter (mm)	2 - 13
Overall Length (mm)	49 - 151
Flute Length (mm)	24 - 101
Shank (mm)	2 - 13

From £1.30 £1.08

View Products

Uncoated HSS 8 Percent Cobalt 3xD Stub Drill - D2107 (YG-1)

The D2104 series are an uncoated style stub length drill made from HSS 8 Percent Cobalt for increased tool life compared to standard HSS drills. Ideal for low hardness steels, cast iron and aluminium....

3xD Stub Drill.
Made from a HSS substrate with an 8% cobalt substrate.
Bright finish for aluminium drilling.
Suitable for machining Steel
Great tool life and performance compared to HSS drills due to 8% Cobalt content.
Ideal for low hardness steels, cast iron & aluminium.
Also suitable for stainless steel, inconel and titanium.
Normal point up to 1.6mm, split point over 1.6mm for higher accuracy drilling.

Diameter (mm)	1 - 30
Overall Length (mm)	26 - 168
Flute Length (mm)	6 - 84
Shank (mm)	1 - 30

From £2.27 £1.89

View Products

Morse Taper HSS 5xD Jobber Length Drill - D1205 (YG-1)

The YG-1 D1205 series Morse Taper HSS Jobber Length drill are steam tempered with a black oxide finish. These drills are a plain HSS economy range for general drilling of Steel, Cast Steel, Alloyed St...

5xD Jobber Length Drill.
Morse Taper Shank.
Made from a HSS substrate.
Steam Tempered (Black Oxide Finish).
Suitable for machining Steels
Plain HSS ecomomy type.

Diameter (mm)	5 - 60
Overall Length (mm)	133 - 422
Flute Length (mm)	52 - 235

From £26.03 £21.69

View Products

HSS DIN340 Straight Shank 8xD Long Series Drill - 04000 Series (Presto)

General-purpose drill with tensile strength up to 1000N/mm². Capable of drilling deep holes or through drill bushings....

HSS Straight Shank DIN340 Long Series Drill
h8 Tolerance
Capable of drilling deep holes or through drill brushings
The web thinning permits better positioning and reduced feed force and torque.
Presto tools are a household name in the cutting tool industry

Diameter (mm)	1 - 16
Overall Length (mm)	56 - 227
Flute Length (mm)	33 - 205
Shank (mm)	1 - 16

From £2.50 £2.08

View Products

HSS DIN338 Straight Shank Jobber (5xD) Letter Drill - 01040 Series (Presto)

General-purpose drill, to drill steels with tensile strength up to 1000N/mm², cast steel, grey cast iron, malleable cast iron, nickel brass and graphite....

HSS DIN338 Straight Shank Jobber Drill
h8 Tolerance
General-purpose drill, to drill steels with tensile strength up to 1000N/mm², cast steel, grey cast iron, malleable cast iron, nickel brass and graphite.
Presto tools are a household name in the cutting tool industry

Overall Length (mm)	93 - 133
Flute Length (mm)	57 - 87

From £5.06 £4.22

View Products

HSS DIN338 h8 Hardened & Ground 5xD Jobber Drill Blank - 01900 Series (Presto)

Jobber length blank hardened & ground all over, h8, without back taper. They may be used for the sizing of holes, drifts, gauges, rollers, punches, locating and knockout pins, etc....

Jobber length blank, hardened & ground
h8 Tolerance
Without back taper
Used for sizing holes, drifts, gauges, rollers, punches, locating and knockout pins
Presto tools are a household name in the cutting tool industry

Diameter (mm)	1 - 13
Overall Length (mm)	34 - 151
Shank (mm)	1 - 13

From £1.70 £1.42

View Products

Gold-P TiN Coated HSS Jobber Drill - D1GP125 (YG-1)

YG-1 D1GP125 range of Gold-P Jobber HSS drills are ideal for general purpose drilling of Stainless Steel, Graphite and Titanium and excellent for general purpose drilling of Steel thanks to their TiN ...

TiN coating on working area increases tool life compared to standard HSS drills
Jobber 5xD length drill
Bright body surface treatment
Right hand helix flute geometry - 30 degree helix angle - 118 degree point angle

Diameter (mm)	1 - 13
Overall Length (mm)	34 - 151
Flute Length (mm)	12 - 101
Shank (mm)	1 - 13

From £1.52 £1.27

View Products

Morse Taper HSS 8xD Long Length Drill - D1209 (YG-1)

The YG-1 D1209 series Morse Taper HSS Long Length drill are steam tempered with a black oxide finish. These drills are a plain HSS economy range for general drilling of Steel, Cast Steel, Alloyed Stee...

8xD Long Length Drill.
Morse Taper Shank.
Made from a HSS substrate.
Steam Tempered (Black Oxide Finish).
Suitable for machining Steels
Plain HSS ecomomy type.

Diameter (mm)	13 - 50
Overall Length (mm)	310 - 605
Flute Length (mm)	205 - 405

From £71.20 £59.33

View Products

Gold-P TiN Coated Eco 5xD Jobber Drill - D1GP165 (YG-1)

The D1GP165 series eco Gold-P jobber drills offer great value for economical general drilling applications. These TiN coated drills reduce cost and increase tool life compared to standard uncoated HSS...

TiN Coating on working area reduces cost and increases tool life compared to standard uncoated HSS drills
General purpose drill for Steel, Stainless Steel, Titanium and Aluminium
Split point for higher performance drilling
Jobber length 5xD
The most economic coated drill in our range

Diameter (mm)	2 - 13
Overall Length (mm)	49 - 151
Flute Length (mm)	24 - 101
Shank (mm)	2 - 13

From £1.80 £1.50

View Products

HSS BS328 Straight Shank Extra Length Drill - 05000 Series (Presto)

General-purpose drill with tensile strength up to 1000N/mm². Extra length enables deeper holes when used in series and pecking. Ideal where extra reach is required....

HSS Straight Shank BS328 Extra Length Drill
h8 Tolerance
To drill steels with tensile strength up to 1000N/mm2, cast steel, cast iron, nickel brass and graphite
Extra length enables deeper holes when used in series and pecking.
Ideal where extra reach is required
Presto tools are a household name in the cutting tool industry

Diameter (mm)	1.5 - 14
Overall Length (mm)	125 - 400
Flute Length (mm)	80 - 300
Shank (mm)	1.5 - 14

From £9.73 £8.11

View Products

Morse Taper HSS 5 Percent Cobalt 5xD Jobber Length Drill - DL205 (YG-1)

The DL205 series YG-1 HSS 5 Percent cobalt jobber length drills have a morse taper shank and are ideal for heavy duty drilling of Steel, Cast Steel (alloyed or Non-Alloyed), Grey Cast Iron, Malleable ...

5xD Jobber Length Drill.
Morse Taper Shank.
Made from a HSS substrate with a 5% cobalt content.
Bright Finish.
Suitable for machining Steels
HSS 5% Cobalt for extra tool life.
Heavy duty.

Diameter (mm)	13 - 30
Overall Length (mm)	182 - 296
Flute Length (mm)	101 - 175

From £62.40 £52.00

View Products

HSS DIN1897 Straight Shank RIVBIT Sheet Metal Drill - 08100 Series (Presto)

Single end twist drill, to drill sheet metals. Designed for thin sheet metal and carbody building and for rivet holes. Mainly used in hand drills....

HSS Straight Shank DIN1897 Sheet Metal Drill
h8 Tolerance
Single end twist drill, to drill sheet metals
Designed for thin sheet metal and carbody building and for rivet holes.
Mainly used in hand drills.
Presto tools are a household name in the cutting tool industry

Diameter (mm)	2.381 - 6.35
Overall Length (mm)	43 - 70
Flute Length (mm)	14 - 31
Shank (mm)	2.381 - 6.35

From £0.97 £0.81

View Products

HSS DIN338 Straight Shank Jobber Drill - 01000 Series (Presto)

General-purpose drill, to drill steels with tensile strength up to 1000N/mm², cast steel, grey cast iron, malleable cast iron, nickel brass and graphite....

HSS DIN338 Straight Shank Jobber Drill
h8 Tolerance
General-purpose drill, to drill steels with tensile strength up to 1000N/mm², cast steel, grey cast iron, malleable cast iron, nickel brass and graphite.
Presto tools are a household name in the cutting tool industry

Diameter (mm)	0.3 - 17.463
Overall Length (mm)	19 - 191
Flute Length (mm)	3 - 130
Shank (mm)	0.3 - 17.463

From £0.97 £0.81

View Products

Morse Taper HSS Extra Long Length Drill - D1210 (YG-1)

The YG-1 D1210 series Morse Taper HSS Extra Long Length drill are steam tempered with a black oxide finish. These drills are a plain HSS economy range for general drilling of Steel, Cast Steel, Alloye...

10xD Long Length Drill.
Morse Taper Shank.
Made from a HSS substrate.
Steam Tempered (Black Oxide Finish).
Suitable for machining Steels
Plain HSS ecomomy type.

Diameter (mm)	13 - 50
Overall Length (mm)	395 - 765
Flute Length (mm)	260 - 555

From £102.00 £85.00

View Products

Gold-P Worm Pattern TiN Coated HSS 5 Percent Cobalt Jobber Drill - DLGP506 (YG-1)

The DLGP506 series Gold-P worm pattern jobber drills are HSS 5 Percent cobalt drills with a TiN coating working area. The cobalt content reduces cost and increases tool life compared to standard HSS d...

TiN Coating on working area with 5% Cobalt content reduces cost and increases tool life compared to standard HSS drill
Right hand, 38° helix, worm pattern helix with deep flute pockets prevent chip build up, especially in soft or long chipping materials
General purpose drill for Steels, Grey & Malleable Cast Iron, Aluminium & Magnesium Alloys

Diameter (mm)	2 - 13
Overall Length (mm)	49 - 151
Flute Length (mm)	24 - 101
Shank (mm)	2 - 13

From £2.53 £2.11

View Products

HSCO h8 Straight Shank Welda Drill - 02181 Series (Presto)

Special Twist Drill designed to drill spot welding points. Mainly used in hand drills....

HSCO Straight Shank Welda Drill
h8 Tolerance
Designed to drill spot welding points
Mainly used in hand drills
Presto tools are a household name in the cutting tool industry

Diameter (mm)	6 - 10
Overall Length (mm)	66 - 89
Flute Length (mm)	28 - 43
Shank (mm)	6 - 10

From £8.30 £6.92

View Products

HSS DIN1897 Straight Shank Double Ended Sheet Metal Drill - 08150 Series (Presto)

Double end twist Drill, to drill sheet metals. Designed for thin sheet metal and carbody building and for rivet holes. Mainly used in hand drills....

HSS Straight Shank DIN1897 Sheet Metal Drill
h8 Tolerance
Double Ended twist drill, to drill sheet metals
Designed for thin sheet metal and carbody building and for rivet holes.
Mainly used in hand drills.
Presto tools are a household name in the cutting tool industry

Diameter (mm)	2 - 10
Overall Length (mm)	38 - 89
Flute Length (mm)	12 - 43
Shank (mm)	2 - 10

From £1.88 £1.57

View Products

There are no products in your shopping basket.

Your Basket Summary

Suggestions

Products

Categories

Cutwel