This hexagon screw extractor set contains 17 pieces. With spiral drill bits, this set increases your efficiency for thread-conserving removal of screws without damage. Can be used for applications in ...
1x Screw extractor drill (1 of each size): 2.3, 2.8, 3.4, 4.5, 5.7, 6.8, 9, 11mm
1x Screw extractor (1 of each size): 2, 2.5, 3, 4, 5, 6, 8, 10mm
This stud extractor set from Kukko contains 25 pieces, designed for removing broken screws, threaded pins and pipe ends. Made in Germany, this set is supplied in a special foam for secure storage....
Universal set for turning off out worn bolts, etc
Set of drill bits and drill bushings
In robust case with foam inlay
Easy to remove the damaged bolt precisely, without damaging the thread
This screw extractor is for right-hand threads. It is used for removing broken screws, threaded pins and pipe ends. Individual screw extractor thread size from M4-M45....
For removing broken screws, threaded pins and pipe ends
54-56 HRC
Rolled thread
Ground shaft
Only screws with a right-hand thread can be unscrewed
Used expressly for removing broken or seized screws. They are left-handed, for use on right-handed threads. The screw is first drilled out to the proper diameter for that extractor. The extractor is t...
Used expressly for removing broken or seized screws
They are left-handed, for use on right-handed threads
The screw is first drilled out to the proper diameter for that extractor
The extractor is then inserted into this hole and turned counter-clockwise
