General Purpose HSS & HSSE Drills
Our best selling HSS drills for economical general drilling, including our GOLD-P drill with TiN coating with 5% cobalt content to reduce cost and increase tool life compared to standard HSS drills.
Our best selling HSS drills for economical general drilling
- GOLD-P Drill has TiN coating with 5% cobalt content to reduce cost and increase tool life compared to standard HSS drills
- Morse taper drills available in long and extra long lengths for deeper hole drilling
- HSS 8% cobalt drills further increase tool life over HSS and HSS 5% cobalt
- Uncoated HSS and HSS 8% cobalt drills ideal for use on non-ferrous metals
- Suitable for drilling all materials
- Morse Taper HSS 5% Cobalt Jobber Length Drill - DL205 (YG-1)The DL205 series YG-1 HSS 5% cobalt jobber length drills have a morse taper shank and are ideal for heavy duty drilling of Steel, Cast Steel (alloyed or Non-Alloyed), Grey Cast Iron, Malleable Cast Ir ... read more >
5xD Jobber Length Drill.
Morse Taper Shank.
Made from a HSS substrate with a 5% cobalt content.
Bright Finish.
Sui ... read more >- P
- M
- K
- N
- Morse Taper HSS Long Length Drill - D1209 (YG-1)The YG-1 D1209 series Morse Taper HSS Long Length drill are steam tempered with a black oxide finish. These drills are a plain HSS economy range for general drilling of Steel, Cast Steel, Alloyed Stee ... read more >
8xD Long Length Drill.
Morse Taper Shank.
Made from a HSS substrate.
Steam Tempered (Black Oxide Finish).
Suitable ... read more >- P
- M
- K
- N
- Morse Taper HSS Extra Long Length Drill - D1210 (YG-1)The YG-1 D1210 series Morse Taper HSS Extra Long Length drill are steam tempered with a black oxide finish. These drills are a plain HSS economy range for general drilling of Steel, Cast Steel, Alloye ... read more >
10xD Long Length Drill.
Morse Taper Shank.
Made from a HSS substrate.
Steam Tempered (Black Oxide Finish).
Suitabl ... read more >- P
- M
- K
- N
- Uncoated HSS 8% Cobalt Stub Drill - D2107 (YG-1)The D2104 series are an uncoated style stub length drill made from HSS 8% Cobalt for increased tool life compared to standard HSS drills. Ideal for low hardness steels, cast iron and aluminium. Diamet ... read more >
3xD Stub Drill.
Made from a HSS substrate with an 8% cobalt substrate.
Bright finish for aluminium drilling.
Suitable fo ... read more >- P
- M
- S
- K
- N
- Super-GP HSS Jobber Steam Tempered Drill - DSH105 (YG-1)The DSH105 series YG-1 Super GP Drills have a special HSS substrate that improves toughness and wear resistance as well as dramatically extending tool life. These are steam tempered (black oxide finis ... read more >
5xD Jobber Drill.
Made from a super HSS substrate.
Steam Tempered (Black Oxide Finish).
Suitable for machining Steel < ... read more >- P
- K
- N
- Uncoated HSS Jobber Drill for Brass/Bronze - D1100 (YG-1)The D1100 series YG-1 HSS Jobber Drills have a special geometry making them ideal for Brass and Bronze. The 15-20° helix and 118° drill point is ideal for drilling short chipping copper alloys. Diam ... read more >
5xD Jobber Drill.
Made from a HSS substrate.
Bright Finish for non-ferrous materials.
Suitable for machining Hard, Britt ... read more >- N
- Gold-P TiN Coated Eco Jobber Drill - D1GP165 (YG-1)The D1GP165 series eco Gold-P jobber drills offer great value for economical general drilling applications. These TiN coated drills reduce cost and increase tool life compared to standard uncoated HSS ... read more >
TiN Coating on working area reduces cost and increases tool life compared to standard uncoated HSS drills
General purpose drill for Steel ... read more >- P
- M
- S
- N
- Gold-P TiN Coated HSS 5% Cobalt Jobber Drill - DLGP195 (YG-1)The DLGP195 series Gold-P jobber drills are a best selling HSS drill in the Cutwel range. These 5% cobalt drills have a TiN coating working area and the higher cobalt content reduces cost and increase ... read more >
TiN Coating on working area with 5% Cobalt content reduces cost and increases tool life compared to standard HSS drill
Normal point up to ... read more >- P
- M
- S
- N
- TiN Coated HSS 8% Cobalt Stub Drill - D4107 (YG-1)The D4107 series stub drills feature a HSS 8% cobalt substrate for far greater tool life and performance over HSS or HSS 5% cobalt drills, especially in harder wearing materials. These TiN coated dril ... read more >
3xD Stub Drill.
Made from a HSS substrate with an 8% cobalt content.
TiN coated.
Suitable for machining Steels <HRc30 ... read more >- P
- M
- S
- K
- N
- TiN Coated HSS 8% Cobalt Jobber Drill - D4105 (YG-1)The D4107 series jobber drills feature a HSS 8% cobalt substrate for far greater tool life and performance over HSS or HSS 5% cobalt drills, especially in harder wearing materials. These TiN coated dr ... read more >
5xD Stub Drill.
Made from a HSS substrate with an 8% cobalt content.
TiN coated.
Suitable for machining Steels <HRc30 ... read more >- P
- M
- S
- K
- N
- Black Oxide Finish HSS Jobber Drill - D1105 (YG-1)The D1105 series YG-1 HSS Jobber Drills have a black oxide finish (2mm and above, bright finish under 2mm). These low budget drills are ideal for general purpose drilling of steel, alloyed and un-allo ... read more >
5xD Jobber Drill.
Made from a HSS substrate.
Steam Tempered.
Suitable for machining Steels <HRc30, Alloyed & Non- ... read more >- P
- K
- N
- Black Oxide Finish HSS Extra Long Drill - D1121 (YG-1)The D1121 series YG-1 HSS Drills are extra long length, 15xD. These are a low cost budget drill with a steam tempered block oxide finish. Ideal for general purpose deep hole drilling in steel, non-all ... read more >
15xD Extra Long Length Drill.
Made from a HSS substrate.
Steam Tempered.
Suitable for machining Steels <HRc30, Alloye ... read more >- P
- K
- N
- Uncoated HSS Jobber Drill for Aluminium - D1106 (YG-1)The D1106 series YG-1 HSS jobber drill has a special design with deep flute pockets for Aluminium drilling. These are also suitable for drilling brass, bronze and magnesium alloys. The bright finish p ... read more >
5xD Jobber Drill.
Made from a HSS substrate.
Bright finish for aluminium drilling.
Suitable for machining Aluminium ... read more >- N
- Uncoated HSS 8% Cobalt Jobber Drill - D2105 (YG-1 )The D2105 series are an uncoated style jobber length drill made from HSS 8% Cobalt for increased tool life compared to standard HSS drills. Ideal for low hardness steels, cast iron and aluminium. Diam ... read more >
5xD Jobber Drill.
Made from a HSS substrate with an 8% cobalt substrate.
Bright finish for aluminium drilling.
Suitable ... read more >- P
- M
- S
- K
- N
- Uncoated HSS 8% Cobalt Long Drill - D2104 (YG-1)The D2104 series are an uncoated style long length drill made from HSS 8% Cobalt for increased tool life compared to standard HSS drills. Ideal for low hardness steels, cast iron and aluminium. Diamet ... read more >
10xD Long Length Drill.
Made from a HSS substrate with an 8% cobalt substrate.
Bright finish for aluminium drilling.
Sui ... read more >- P
- M
- S
- K
- N
- Morse Taper HSS Jobber Length Drill - D1205 (YG-1)The YG-1 D1205 series Morse Taper HSS Jobber Length drill are steam tempered with a black oxide finish. These drills are a plain HSS economy range for general drilling of Steel, Cast Steel, Alloyed St ... read more >
5xD Jobber Length Drill.
Morse Taper Shank.
Made from a HSS substrate.
Steam Tempered (Black Oxide Finish).
Suitab ... read more >- P
- M
- K
- N