Supercut Spade Drill Inserts
Fully ground self-centering inserts available in either HSS, HSS-E, Powder Metal or Carbide substrates. HSS & Powder Metal ideal for unstable machining conditions and carbide for increased wear resistance.
The most versatile drilling system in the world
- It is possible to drill from 9.5mm to 114mm using just 9 different holders
- Fully ground self-centering inserts available in either HSS, HSS-E, Powder Metal or Carbide substrates
- Extremely accurate compared to traditional indexable drills, even in deep holes
- Faster set-up times, as inserts can be changed on the machine
- Suitable for use on both CNC and conventional / older machines
- TiAlN Coated Powder Metal Supercut Spade Drill Inserts (YG-1)M48 Powder Metal Supercut Spade Drill Inserts come in a wide range of metric and imperial sizes from 9.5-35mm and 3/8"-1-3/8". These TiAlN coated, self centering inserts, provide extremely accurate dr ... read more >M48 Powder Metal Substrate
Metric Sizes 9.5-35mm
Imperial Sizes 3/8"-1-3/8"
Fully Ground & Self Centering Inserts
Increased T ... read more >- P
- M
- K
- N
- TiAlN Coated HSS 5% Cobalt Supercut Spade Drill Inserts (YG-1)HSS 5% Cobalt Supercut Spade Drill Inserts come in a wide range of metric and imperial sizes from 9.5-114mm and 3/8"-3". These TiAlN coated, self centering inserts, provide extremely accurate drilling ... read more >HSS 5% Cobalt Substrate
Metric Sizes 9.5-114mm
Imperial Sizes 3/8"-3"
Fully Ground & Self Centering Inserts
First Choice for ... read more >- P
- M
- K
- N
- TiAlN Coated K20 Carbide Supercut Spade Drill Inserts (YG-1)K20 Micrograin Carbide Supercut Spade Drill Inserts come in a wide range of metric and imperial sizes from 9.5-35mm and 3/8"-1-3/8". These TiAlN coated, self centering inserts, provide extremely accur ... read more >K20 Micrograin Carbide Substrate
Metric Sizes 9.5-35mm
Imperial Sizes 3/8"-1-3/8"
Fully Ground & Self Centering Inserts
Ideal ... read more >- P
- M
- K
- N
- TiAlN Coated P40 Carbide Supercut Spade Drill Inserts (YG-1)P40 Micrograin Carbide Supercut Spade Drill Inserts come in a wide range of metric and imperial sizes from 9.5-35mm and 3/8"-1-3/8". These TiAlN coated, self centering inserts, provide extremely accur ... read more >P40 Micrograin Carbide Substrate
Metric Sizes 9.5-35mm
Imperial Sizes 3/8"-1-3/8"
Fully Ground & Self Centering Inserts
Ultim ... read more >- P
- M
- K
- N
- Flat Bottom TiAlN Coated HSS 5% Cobalt Supercut Spade Drill Inserts (YG-1)HSS 5% Cobalt Flat Bottom Spade Drills Inserts can be used as a finishing tool for creating a flat bottom in a pre-existing hole. Sizes range from 11.5-45mm and these are suitable for general machinin ... read more >5% HSS Cobalt Substrate
Metric Sizes 11.5-45mm
For General Machining of All Materials
TiAlN Coated
Use as a Finishing Tool for ... read more >- P
- M
- K
- N