Free Next Day Delivery
on orders over £59 ex vat*

Expert Technical Team
Get advice on 01924 869 615

Same Day Despatch
On orders placed up to 5.45pm

Any orders placed on Thursday the 28th of March (via Next Day delivery service) will be delivered on Tuesday the 2nd of April due to closure over the Easter Bank Holiday weekend.

Saturday deliveries are available for any urgent orders, please contact our sales team on 01924 869610 or email sales@cutwel.net for more information.

Routing Tools For Composites

Filter By arrow
carrat-down

18 Items

Sort By
carrat-down
sort-descending

The 12000 series solid carbide router for wood, foamboard, PVC and high pressure composites. This kind of tool is often used for small parts and thin workpieces....

  • When cutting with a downcut end mill the chips are thrown downwards
  • There may be poor evacuation, however, the tool pushes the material downwards which helps for maintaining this
  • Often used for think workpieces and small parts
  • Recommended to have a space between sacrificial plate and material for correct chips evacuation

Size

Diameter (mm)1 - 12
Overall Length (mm)30 - 80
Flute Length (mm)2 - 12
Shank (mm)4 - 38

From £28.34 £23.62

The 67-000 series Solid Carbide router from LMT Onsrud is designed as a fibreglass router. Their upcut/downcut diamond design effectively shears fibrous materials....

  • Application: fibreglass, composites
  • With drill, fine burr
  • Metric multi flute fibreglass router

Size

Diameter (mm)4 - 12
Overall Length (mm)50 - 76
Flute Length (mm)16 - 25
Shank (mm)6 - 12

From £47.77 £39.81

The 67-000 series Solid Carbide router from LMT Onsrud is designed as a fibreglass router. Their upcut/downcut diamond design effectively shears fibrous materials....

  • Application: fibreglass, composites
  • With drill, fine burr
  • Imperial multi flute fibreglass router

From £49.03 £40.86

The 66-775 series Solid Carbide router from LMT Onsrud is a tool is designed as a combination roughing and finishing tool in one....

  • Application: composite, fibreglass
  • The roughing profile reduces cutting forces
  • The geometry of the finishing flutes cleanly shear Fibres leaving a smooth edge on the workpiece material
  • Diamond coated (DFC) for increased tool life
  • 4, 6 or 8 flute upcut low helix rougher finisher - Imperial

From £226.90 £189.08

The 67-000 series Solid Carbide router from LMT Onsrud is designed as a fibreglass router. Their upcut/downcut diamond design effectively shears fibrous materials....

  • Application: fibreglass, composites
  • With end mill point, medium burr
  • Imperial multi flute fibreglass router

From £0.00 £0.00

The 66-500 series Solid Carbide router from LMT Onsrud is a DFC coated tool to be used for roughing or finishing carbon fibre laminates. Multiple flutes eliminate vibration and control tool engagement...

  • Application: composite, fibreglass
  • Enhanced diamond film coating (DFC) for increased tool life
  • Chisel tooth design creates a compression effect to prevent delamination and fibre breakout
  • Drill point for drilling
  • End mill point for plunging and helical interpolation

Size

Diameter (mm)3 - 12
Overall Length (mm)50 - 83
Flute Length (mm)8 - 26
Shank (mm)6 - 12

From £197.74 £164.78

The 60-100MW series Solid Carbide router from LMT Onsrud is designed for maximum life when cutting in highwear applications. Unique geometries and carbides improve the wear characteristics of the tool...

  • Application: double-sided laminated and veneered wood composites
  • Superior finish, great tool life
  • Metric - max life compression spiral
  • Mortise compressions are designed with short upcut to allow mortise cut with downcut action

Size

Diameter (mm)6 - 12
Overall Length (mm)64 - 76
Flute Length (mm)22 - 28
Shank (mm)6 - 12

From £80.68 £67.23

The 60-100MW series Solid Carbide router from LMT Onsrud is designed for maximum life when cutting in highwear applications. Unique geometries and carbides improve the wear characteristics of the tool...

  • Application: double-sided laminated and veneered wood composites
  • Superior finish, great tool life
  • 3 flute max life compression spiral
  • Mortise compressions are designed with short upcut to allow mortise cut with downcut action

From £126.17 £105.14

The 60-700 series Solid Carbide router from LMT Onsrud combines a roughing and finishing cut in one tool for rapid feed rates with a good finish....

  • Application: double-sided laminated and veneered wood composites
  • High velocity compression spiral
  • For rapid feed rates with a good finish
  • Helix angle: 30°

From £0.00 £0.00

The 60-100C series Solid Carbide router from LMT Onsrud is designed to give the optimum edge finish of the compression spiral bits along with the increased feed rates of the chipbreaker/finisher desig...

  • Application: double-sided laminated and veneered wood composites
  • Increased feed rates of the chipbreaker/finisher design
  • Designed to give the optimum edge finish
  • Mortise compressions are designed with short upcut to allow mortise cut with downcut action
  • Helix angle: 30°

From £0.00 £0.00

The 60-100MW series Solid Carbide router from LMT Onsrud is designed for maximum life when cutting in highwear applications. Unique geometries and carbides improve the wear characteristics of the tool...

  • Application: double-sided laminated and veneered wood composites
  • Superior finish, great tool life
  • 2 flute max life compression spiral
  • Mortise compressions are designed with short upcut to allow mortise cut with downcut action

From £92.92 £77.43

The 60-100MW series Solid Carbide router from LMT Onsrud is designed for maximum life when cutting in highwear applications. Unique geometries and carbides improve the wear characteristics of the tool...

  • Application: double-sided laminated and veneered wood composites
  • Superior finish, great tool life
  • 1 flute max life compression spiral
  • Mortise compressions are designed with short upcut to allow mortise cut with downcut action

From £71.40 £59.50

The 66-775 series Solid Carbide router from LMT Onsrud is a tool is designed as a combination roughing and finishing tool in one....

  • Application: composite, fibreglass
  • The roughing profile reduces cutting forces
  • The geometry of the finishing flutes cleanly shear Fibres leaving a smooth edge on the workpiece material
  • Diamond coated (DFC) for increased tool life
  • 4, 6 or 8 flute upcut low helix rougher finisher - Metric

Size

Diameter (mm)6 - 12
Overall Length (mm)90 - 100
Flute Length (mm)20 - 38
Shank (mm)6 - 12

From £232.49 £193.74

The 12000 series solid carbide router for wood, foamboard, PVC and high pressure composites. This kind of tool is often used for small parts and thin workpieces....

  • When cutting with a downcut end mill the chips are thrown downwards
  • There may be poor evacuation, however, the tool pushes the material downwards which helps for maintaining this
  • Often used for think workpieces and small parts
  • Recommended to have a space between sacrificial plate and material for correct chips evacuation

From £46.24 £38.53

The 13000 series solid carbide router for wood, foamboard, PVC and high pressure composites....

  • Upcut tools are the most commonly used tools.
  • Chips are evacuted upwards when machining/li>
  • Workpieces need to be maintained properly because the tool pulls the material upwards

Size

Diameter (mm)1 - 14
Overall Length (mm)30 - 120
Flute Length (mm)4 - 62
Shank (mm)2 - 14

From £28.34 £23.62

The 13000 series solid carbide router for wood, foamboard, PVC and high pressure composites....

  • Upcut tools are the most commonly used tools.
  • Chips are evacuted upwards when machining/li>
  • Workpieces need to be maintained properly because the tool pulls the material upwards

From £30.36 £25.30

The EDC series 1 flute solid carbide chamfering router for aluminium, wood, foamboard, PVC & high pressure composites....

  • Cutting end mills for plastics and woods with a 45° chamfer.
  • This cutter allows to cut materials and to make a chamfer at the same time
  • Avoid delamination when cutting laminated sheets or pasted paper sheets

Size

Diameter (mm)4 - 4
Overall Length (mm)60 - 60
Flute Length (mm)4.3 - 6.3
Shank (mm)8 - 8

From £42.86 £35.72

The EDAC series 1 flute solid carbide chamfering router for aluminium, wood, foamboard, PVC & high pressure composites....

  • Cutting end mills for non-ferrous metals and aluminum with a chamfer (can also cut plastics)
  • This cutter allows to cut materials and make a chamfer at the same time. These tools avoid delamination when laminated sheets

Size

Diameter (mm)4 - 4
Overall Length (mm)50 - 50
Flute Length (mm)2.3 - 3.3
Shank (mm)6 - 6

From £72.18 £60.15