Call us 8am - 5:30pm Call us 8am - 5pm Call us from 8am on Monday 01924 869660

help Help
basket-added
cross Close Menu
Shop
Accounts
burger cross View Products Close Menu

Products

help Help
basket-added Basket

Free Next Day Delivery
on orders over £69 ex vat*

Expert Technical Team
Get advice on 01924 869 615

Same Day Dispatch
On orders placed up to 5.30pm

  • Home
  • Shop By Taper

Shop By Taper

Filter By arrow
carrat-down

1033 Items

Sort By
carrat-down
sort-descending
BT40 Power E-Hydro Hydraulic Chuck Kit - (YG-1)
ENGINEERS CHOICE
Our special selection of tooling solutions trusted by thousands of engineers across the UK and Ireland.
ENGINEERS CHOICE
Our special selection of tooling solutions trusted by thousands of engineers across the UK and Ireland.
BT40 Power E-Hydro Hydraulic Chuck Kit - (YG-1)

BT40 YG-1 POWER E-HYDRO Toolholders give up to 300% more tool life than ER Collet Chucks with up to 900Nm clamping force. Perfect surface finish is achieved with no chatter marks and minimum noise whi...

  • The Ultimate Hydraulic Toolholder For Milling, Drilling and Reaming
  • Up to 300% more tool life than ER Collet Chucks
  • Sleeves included: 1 x 6,8,10,12 &16mm
  • Up to 900Nm clamping force
  • Perfect surface finish – no chatter marks
  • Push feed rates up to 30% higher
  • Minimum noise
  • Change cutting tool in seconds with 3 micron repeatability
  • 3 micron run-out accuracy, balanced to 25,000RPM
  • Contains 20mm BT40 toolholder
  • Compact design
  • Suitable for through coolant tools
Diameter (mm)20 - 20

From £584.33 £486.94

View Products
SK40 Power E-Hydro Hydraulic Chuck Kit - (YG-1)
ENGINEERS CHOICE
Our special selection of tooling solutions trusted by thousands of engineers across the UK and Ireland.
ENGINEERS CHOICE
Our special selection of tooling solutions trusted by thousands of engineers across the UK and Ireland.
SK40 Power E-Hydro Hydraulic Chuck Kit - (YG-1)

SK40 YG-1 POWER E-HYDRO Toolholders give up to 300% more tool life than ER Collet Chucks with up to 900Nm clamping force. Perfect surface finish is achieved with no chatter marks and minimum noice whi...

  • The Ultimate Hydraulic Toolholder For Milling, Drilling and Reaming
  • Up to 300% more tool life than ER Collet Chucks
  • Sleeves included: 1 x 6,8,10,12 &16mm
  • Up to 900Nm clamping force
  • Perfect surface finish – no chatter marks
  • Push feed rates up to 30% higher
  • Minimum noise
  • Change cutting tool in seconds with 3 micron repeatability
  • 3 micron run-out accuracy, balanced to 25,000RPM
  • Contains 20mm BT40 toolholder
  • Compact design
  • Suitable for through coolant tools
Diameter (mm)20 - 20

From £437.08 £364.23

View Products
BT40 Power E-Hydro Hydraulic Chuck 25,000RPM G2.5 (YG-1)
ENGINEERS CHOICE
Our special selection of tooling solutions trusted by thousands of engineers across the UK and Ireland.
ENGINEERS CHOICE
Our special selection of tooling solutions trusted by thousands of engineers across the UK and Ireland.
BT40 Power E-Hydro Hydraulic Chuck 25,000RPM G2.5 (YG-1)

BT40 YG-1 POWER E-HYDRO Toolholders give up to 300% more tool life than ER Collet Chucks with up to 900Nm clamping force. Perfect surface finish is achieved with no chatter marks and minimum noise whi...

  • BT40 back end type.
  • AD/B through coolant type.
  • 3 micron run-out accuracy, balanced to 25,000RPM.
  • Either 58mm or 72.5mm gauge length.
  • The Ultimate Hydraulic Toolholder For Milling, Drilling and Reaming.
  • Up to 300% more tool life than ER Collet Chucks.
  • Up to 900Nm clamping force.
  • High torque transmission is guaranteed using hydraulic clamping technology.
  • Optimal radial rigidity from a compact and robust toolholder body, avoids lateral deflection during metal cutting.
  • Can be used with reduction sleeves or the tool can be clamped directly in the holder. 
  • HSS and carbide shanks in plain, weldon or whistle notch can be clamped.
  • Perfect surface finish – no chatter marks.
  • Push feed rates up to 30% higher.
  • Change cutting tool in seconds with 3 micron repeatability.
  • Compact design.
  • Suitable for through coolant tools.
Diameter (mm)12 - 20

From £183.65 £153.04

View Products
SK40 Power E-Hydro Hydraulic Chuck 25,000RPM G2.5 (YG-1)
ENGINEERS CHOICE
Our special selection of tooling solutions trusted by thousands of engineers across the UK and Ireland.
ENGINEERS CHOICE
Our special selection of tooling solutions trusted by thousands of engineers across the UK and Ireland.
SK40 Power E-Hydro Hydraulic Chuck 25,000RPM G2.5 (YG-1)

SK40 YG-1 POWER E-HYDRO Toolholders give up to 300% more tool life than ER Collet Chucks with up to 900Nm clamping force. Perfect surface finish is achieved with no chatter marks and minimum noice whi...

  • SK40 back end type.
  • AD/B through coolant type.
  • 3 micron run-out accuracy, balanced to 25,000RPM.
  • Either 50mm or 64.5mm gauge length.
  • The Ultimate Hydraulic Toolholder For Milling, Drilling and Reaming.
  • Up to 300% more tool life than ER Collet Chucks.
  • Up to 900Nm clamping force.
  • High torque transmission is guaranteed using hydraulic clamping technology.
  • Optimal radial rigidity from a compact and robust toolholder body, avoids lateral deflection during metal cutting.
  • Can be used with reduction sleeves or the tool can be clamped directly in the holder. 
  • HSS and carbide shanks in plain, weldon or whistle notch can be clamped.
  • Perfect surface finish – no chatter marks.
  • Push feed rates up to 30% higher.
  • Change cutting tool in seconds with 3 micron repeatability.
  • Compact design.
  • Suitable for through coolant tools.
Diameter (mm)12 - 20

From £183.65 £153.04

View Products
HSK63A Power E-Hydro Hydraulic Chuck 25,000RPM G2.5 (YG-1)
ENGINEERS CHOICE
Our special selection of tooling solutions trusted by thousands of engineers across the UK and Ireland.
ENGINEERS CHOICE
Our special selection of tooling solutions trusted by thousands of engineers across the UK and Ireland.
HSK63A Power E-Hydro Hydraulic Chuck 25,000RPM G2.5 (YG-1)

HSK63A YG-1 POWER E-HYDRO Toolholders give up to 300% more tool life than ER Collet Chucks with up to 900Nm clamping force. Perfect surface finish is achieved with no chatter marks and minimum noice w...

  • HSK63A back end type.
  • AD/B through coolant type.
  • 3 micron run-out accuracy, balanced to 25,000RPM.
  • 80mm gauge length.
  • The Ultimate Hydraulic Toolholder For Milling, Drilling and Reaming.
  • Up to 300% more tool life than ER Collet Chucks.
  • Up to 900Nm clamping force.
  • High torque transmission is guaranteed using hydraulic clamping technology.
  • Optimal radial rigidity from a compact and robust toolholder body, avoids lateral deflection during metal cutting.
  • Can be used with reduction sleeves or the tool can be clamped directly in the holder. 
  • HSS and carbide shanks in plain, weldon or whistle notch can be clamped.
  • Perfect surface finish – no chatter marks.
  • Push feed rates up to 30% higher.
  • Change cutting tool in seconds with 3 micron repeatability.
  • Compact design.
  • Suitable for through coolant tools.
Diameter (mm)12 - 20

From £241.94 £201.62

View Products
BT30 End Mill Holder 15,000RPM G6.3 (Cutwel Pro)
ENGINEERS CHOICE
Our special selection of tooling solutions trusted by thousands of engineers across the UK and Ireland.
ENGINEERS CHOICE
Our special selection of tooling solutions trusted by thousands of engineers across the UK and Ireland.
BT30 End Mill Holder 15,000RPM G6.3 (Cutwel Pro)

Cutwel Pro End Mil Holder (Side Lock Arbor) with a BT30 connection. These are designed for use with tools that have a weldon (flat shank), therefore they provide better rigidity than ER collet chucks ...

  • BT30 End Mill Holder (Side Lock Arbors)
  • Balanced to 15,000RPM G6.3
  • Excellent rigidity compared to ER Collet Chucks
  • For use with tools that have a weldon (flat) shank
  • Excellent protection against tool pull out
  • Through Coolant
    • Diameter (mm)6 - 20

    From £41.21 £34.34

    View Products
    BT40 End Mill Holder 15,000RPM G6.3 (Cutwel Pro)
    ENGINEERS CHOICE
    Our special selection of tooling solutions trusted by thousands of engineers across the UK and Ireland.
    ENGINEERS CHOICE
    Our special selection of tooling solutions trusted by thousands of engineers across the UK and Ireland.
    BT40 End Mill Holder 15,000RPM G6.3 (Cutwel Pro)

    Cutwel Pro End Mil Holder (Side Lock Arbor) with a BT40 connection. These are designed for use with tools that have a weldon (flat shank), therefore they provide better rigidity than ER collet chucks ...

    • BT40 End Mill Holder (Side Lock Arbors)
    • Balanced to 15,000RPM G6.3
    • Excellent rigidity compared to ER Collet Chucks
    • For use with tools that have a weldon (flat) shank
    • Excellent protection against tool pull out
  • Through Coolant
    • Diameter (mm)6 - 40

    From £37.46 £31.22

    View Products
    SK40 End Mill Holder 15,000RPM G6.3 (Cutwel Pro)
    ENGINEERS CHOICE
    Our special selection of tooling solutions trusted by thousands of engineers across the UK and Ireland.
    ENGINEERS CHOICE
    Our special selection of tooling solutions trusted by thousands of engineers across the UK and Ireland.
    SK40 End Mill Holder 15,000RPM G6.3 (Cutwel Pro)

    Cutwel Pro End Mil Holder (Side Lock Arbor) with a SK40 connection. These are designed for use with tools that have a weldon (flat shank), therefore they provide better rigidity than ER collet chucks ...

    • SK40 End Mill Holder (Side Lock Arbors)
    • Balanced to 15,000RPM G6.3
    • Excellent rigidity compared to ER Collet Chucks
    • For use with tools that have a weldon (flat) shank
    • Through Coolant
    • Excellent protection against tool pull out
    Diameter (mm)6 - 40

    From £37.46 £31.22

    View Products
    HSK63A End Mill Holder 15,000RPM G6.3 (Cutwel Pro)
    ENGINEERS CHOICE
    Our special selection of tooling solutions trusted by thousands of engineers across the UK and Ireland.
    ENGINEERS CHOICE
    Our special selection of tooling solutions trusted by thousands of engineers across the UK and Ireland.
    HSK63A End Mill Holder 15,000RPM G6.3 (Cutwel Pro)

    Cutwel Pro End Mil Holder (Side Lock Arbor) with a HSK63A connection. These are designed for use with tools that have a weldon (flat shank), therefore they provide better rigidity than ER collet chuck...

    • HSK63A End Mill Holder (Side Lock Arbors)
    • Balanced to 15,000RPM G6.3
    • Through Coolant
    • Excellent rigidity compared to ER Collet Chucks
    • For use with tools that have a weldon (flat) shank
    • Excellent protection against tool pull out
    Diameter (mm)6 - 32

    From £100.19 £83.49

    View Products
    ISO40 End Mill Holder 8,000RPM (Cutwel Pro)
    ENGINEERS CHOICE
    Our special selection of tooling solutions trusted by thousands of engineers across the UK and Ireland.
    ENGINEERS CHOICE
    Our special selection of tooling solutions trusted by thousands of engineers across the UK and Ireland.
    ISO40 End Mill Holder 8,000RPM (Cutwel Pro)

    Cutwel Pro End Mil Holder (Side Lock Arbor) with a ISO40 connection. These are designed for use with tools that have a weldon (flat shank), therefore they provide better rigidity than ER collet chucks...

    • DIN2080 ISO40 End Mill Holder (Side Lock Arbors)
    • Balanced to 8,000RPM
    • For Metric Draw Bars
    • Excellent rigidity compared to ER Collet Chucks
    • For use with tools that have a weldon (flat) shank
    • Excellent protection against tool pull out
  • Through Coolant
    • Diameter (mm)6 - 40

    From £64.62 £53.85

    View Products
    BT30 ER16 Collet Chuck, Standard Nut, Balanced to 15,000RPM G6.3 (Cutwel Pro)
    ENGINEERS CHOICE
    Our special selection of tooling solutions trusted by thousands of engineers across the UK and Ireland.
    ENGINEERS CHOICE
    Our special selection of tooling solutions trusted by thousands of engineers across the UK and Ireland.
    BT30 ER16 Collet Chuck, Standard Nut, Balanced to 15,000RPM G6.3 (Cutwel Pro)

    Cutwel Pro BT30 Standard Type ER16 Collet Chucks have a clamping capacity of 0.5-10mm. They come balanced to 15,000RPM G6.3....

    • BT30 ER Collet Chucks
    • ER16 (0.5-10mm Clamping Capacity)
    • Standard Type 15,000RPM G6.3
    • The most flexible tool holding system
    • Low cost solution to a wide range of applications

    From £32.96 £27.47

    View Products
    BT30 ER25 Collet Chuck, Standard Nut, Balanced to 15,000RPM G6.3 (Cutwel Pro)
    ENGINEERS CHOICE
    Our special selection of tooling solutions trusted by thousands of engineers across the UK and Ireland.
    ENGINEERS CHOICE
    Our special selection of tooling solutions trusted by thousands of engineers across the UK and Ireland.
    BT30 ER25 Collet Chuck, Standard Nut, Balanced to 15,000RPM G6.3 (Cutwel Pro)

    Cutwel Pro BT30 Standard Type ER25 Collet Chucks have a clamping capacity of 0.5-16mm. They come balanced to 15,000RPM G6.3....

    • BT30 ER Collet Chucks
    • ER25 (0.5-16mm Clamping Capacity)
    • Standard Type 15,000RPM G6.3
    • The most flexible tool holding system
    • Low cost solution to a wide range of applications

    From £32.96 £27.47

    View Products
    BT30 ER32 Collet Chuck, Standard Nut, Balanced to 15,000RPM G6.3 (Cutwel Pro)
    ENGINEERS CHOICE
    Our special selection of tooling solutions trusted by thousands of engineers across the UK and Ireland.
    ENGINEERS CHOICE
    Our special selection of tooling solutions trusted by thousands of engineers across the UK and Ireland.
    BT30 ER32 Collet Chuck, Standard Nut, Balanced to 15,000RPM G6.3 (Cutwel Pro)

    Cutwel Pro BT30 Standard Type ER32 Collet Chucks have a clamping capacity of 1-20mm. They come balanced to 15,000RPM G6.3....

    • BT30 ER Collet Chucks
    • ER32 (1-20mm Clamping Capacity)
    • Standard Type 15,000RPM G6.3
    • The most flexible tool holding system
    • Low cost solution to a wide range of applications

    From £32.96 £27.47

    View Products
    BT40 ER16 Collet Chuck, Standard Nut, Balanced to 15,000RPM G6.3 (Cutwel Pro)
    ENGINEERS CHOICE
    Our special selection of tooling solutions trusted by thousands of engineers across the UK and Ireland.
    ENGINEERS CHOICE
    Our special selection of tooling solutions trusted by thousands of engineers across the UK and Ireland.
    BT40 ER16 Collet Chuck, Standard Nut, Balanced to 15,000RPM G6.3 (Cutwel Pro)

    Cutwel Pro BT40 Standard Type ER16 Collet Chucks have a clamping capacity of 0.5-10mm. They come balanced to 15,000RPM G6.3....

    • BT40 ER Collet Chucks
    • ER16 (0.5-10mm Clamping Capacity)
    • Standard Type 15,000RPM G6.3
    • The most flexible tool holding system
    • Low cost solution to a wide range of applications

    From £33.74 £28.12

    View Products
    BT40 ER25 Collet Chuck, Standard Nut, Balanced to 15,000RPM G6.3 (Cutwel Pro)
    ENGINEERS CHOICE
    Our special selection of tooling solutions trusted by thousands of engineers across the UK and Ireland.
    ENGINEERS CHOICE
    Our special selection of tooling solutions trusted by thousands of engineers across the UK and Ireland.
    BT40 ER25 Collet Chuck, Standard Nut, Balanced to 15,000RPM G6.3 (Cutwel Pro)

    Cutwel Pro BT40 Standard Type ER25 Collet Chucks have a clamping capacity of 0.5-16mm. They come balanced to 15,000RPM G6.3....

    • BT40 ER Collet Chucks
    • ER25 (0.5-16mm Clamping Capacity)
    • Standard Type 15,000RPM G6.3
    • The most flexible tool holding system
    • Low cost solution to a wide range of applications

    From £33.74 £28.12

    View Products
    SK40 ER16 DIN 69871 Collet Chuck, Standard Nut, Balanced to 15,000RPM G6.3 (Cutwel Pro)
    ENGINEERS CHOICE
    Our special selection of tooling solutions trusted by thousands of engineers across the UK and Ireland.
    ENGINEERS CHOICE
    Our special selection of tooling solutions trusted by thousands of engineers across the UK and Ireland.
    SK40 ER16 DIN 69871 Collet Chuck, Standard Nut, Balanced to 15,000RPM G6.3 (Cutwel Pro)

    Cutwel Pro SK40 Standard Type ER16 Collet Chucks have a clamping capacity of 0.5-10mm. They come balanced to 15,000RPM G6.3....

    • SK40 ER Collet Chucks
    • ER16 (0.5-10mm Clamping Capacity)
    • Standard Type 15,000RPM G6.3
    • The most flexible tool holding system
    • Low cost solution to a wide range of applications

    From £32.45 £27.04

    View Products
    SK40 ER25 DIN 69871 Collet Chuck, Standard Nut, Balanced to 15,000RPM G6.3 (Cutwel Pro)
    ENGINEERS CHOICE
    Our special selection of tooling solutions trusted by thousands of engineers across the UK and Ireland.
    ENGINEERS CHOICE
    Our special selection of tooling solutions trusted by thousands of engineers across the UK and Ireland.
    SK40 ER25 DIN 69871 Collet Chuck, Standard Nut, Balanced to 15,000RPM G6.3 (Cutwel Pro)

    Cutwel Pro SK40 Standard Type ER25 Collet Chucks have a clamping capacity of 0.5-16mm. They come balanced to 15,000RPM G6.3....

    • SK40 ER Collet Chucks
    • ER25 (0.5-16mm Clamping Capacity)
    • Standard Type 15,000RPM G6.3
    • The most flexible tool holding system
    • Low cost solution to a wide range of applications

    From £32.45 £27.04

    View Products
    SK40 ER32 DIN 69871 Collet Chuck, Standard Nut, Balanced to 15,000RPM G6.3 (Cutwel Pro)
    ENGINEERS CHOICE
    Our special selection of tooling solutions trusted by thousands of engineers across the UK and Ireland.
    ENGINEERS CHOICE
    Our special selection of tooling solutions trusted by thousands of engineers across the UK and Ireland.
    SK40 ER32 DIN 69871 Collet Chuck, Standard Nut, Balanced to 15,000RPM G6.3 (Cutwel Pro)

    Cutwel Pro SK40 Standard Type ER32 Collet Chucks have a clamping capacity of 1-20mm. They come balanced to 15,000RPM G6.3....

    • SK40 ER Collet Chucks
    • ER32 (1-20mm Clamping Capacity)
    • Standard Type 15,000RPM G6.3
    • The most flexible tool holding system
    • Low cost solution to a wide range of applications

    From £32.45 £27.04

    View Products
    HSK63A ER16 DIN 69893 Collet Chuck, Standard Nut, Balanced to 15,000RPM G6.3 (Cutwel Pro)
    ENGINEERS CHOICE
    Our special selection of tooling solutions trusted by thousands of engineers across the UK and Ireland.
    ENGINEERS CHOICE
    Our special selection of tooling solutions trusted by thousands of engineers across the UK and Ireland.
    HSK63A ER16 DIN 69893 Collet Chuck, Standard Nut, Balanced to 15,000RPM G6.3 (Cutwel Pro)

    Cutwel Pro HSK63A Standard Type ER16 Collet Chucks have a clamping capacity of 0.5-10mm. They come balanced to 15,000RPM G6.3....

    • HSK63A ER Collet Chucks
    • ER16 (0.5-10mm Clamping Capacity)
    • Standard Type 15,000RPM G6.3
    • The most flexible tool holding system
    • Low cost solution to a wide range of applications

    From £99.58 £82.98

    View Products
    HSK63A ER25 DIN 69893 Collet Chuck, Standard Nut, Balanced to 15,000RPM G6.3 (Cutwel Pro)
    ENGINEERS CHOICE
    Our special selection of tooling solutions trusted by thousands of engineers across the UK and Ireland.
    ENGINEERS CHOICE
    Our special selection of tooling solutions trusted by thousands of engineers across the UK and Ireland.
    HSK63A ER25 DIN 69893 Collet Chuck, Standard Nut, Balanced to 15,000RPM G6.3 (Cutwel Pro)

    Cutwel Pro HSK63A Standard Type ER25 Collet Chucks have a clamping capacity of 0.5-16mm. They come balanced to 15,000RPM G6.3....

    • HSK63A ER Collet Chucks
    • ER25 (0.5-16mm Clamping Capacity)
    • Standard Type 15,000RPM G6.3
    • The most flexible tool holding system
    • Low cost solution to a wide range of applications

    From £102.04 £85.03

    View Products
    HSK63A ER32 DIN 69893 Collet Chuck, Standard Nut, Balanced to 15,000RPM G6.3 (Cutwel Pro)
    ENGINEERS CHOICE
    Our special selection of tooling solutions trusted by thousands of engineers across the UK and Ireland.
    ENGINEERS CHOICE
    Our special selection of tooling solutions trusted by thousands of engineers across the UK and Ireland.
    HSK63A ER32 DIN 69893 Collet Chuck, Standard Nut, Balanced to 15,000RPM G6.3 (Cutwel Pro)

    Cutwel Pro HSK63A Standard Type ER32 Collet Chucks have a clamping capacity of 1-20mm. They come balanced to 15,000RPM G6.3....

    • HSK63A ER Collet Chucks
    • ER32 (1-20mm Clamping Capacity)
    • Standard Type 15,000RPM G6.3
    • The most flexible tool holding system
    • Low cost solution to a wide range of applications

    From £106.10 £88.42

    View Products
    HSK63A Power E-Hydro Hydraulic Chuck Kit - (YG-1)
    ENGINEERS CHOICE
    Our special selection of tooling solutions trusted by thousands of engineers across the UK and Ireland.
    ENGINEERS CHOICE
    Our special selection of tooling solutions trusted by thousands of engineers across the UK and Ireland.
    HSK63A Power E-Hydro Hydraulic Chuck Kit - (YG-1)

    HSK63A YG-1 POWER E-HYDRO Toolholders give up to 300% more tool life than ER Collet Chucks with up to 900Nm clamping force. Perfect surface finish is achieved with no chatter marks and minimum noice w...

    • The Ultimate Hydraulic Toolholder For Milling, Drilling and Reaming
    • Up to 300% more tool life than ER Collet Chucks
    • Sleeves included: 1 x 6,8,10,12 &16mm
    • Up to 900Nm clamping force
    • Perfect surface finish – no chatter marks
    • Push feed rates up to 30% higher
    • Minimum noise
    • Change cutting tool in seconds with 3 micron repeatability
    • 3 micron run-out accuracy, balanced to 25,000RPM
    • Contains 20mm BT40 toolholder
    • Compact design
    • Suitable for through coolant tools
    Diameter (mm)20 - 20

    From £566.65 £472.21

    View Products
    BT40 Shrink Fit Chuck 25,000RPM G2.5 (YG-1)
    ENGINEERS CHOICE
    Our special selection of tooling solutions trusted by thousands of engineers across the UK and Ireland.
    ENGINEERS CHOICE
    Our special selection of tooling solutions trusted by thousands of engineers across the UK and Ireland.
    BT40 Shrink Fit Chuck 25,000RPM G2.5 (YG-1)

    BT40 YG-1 shrink fit chucks offer excellent peformance and are balanced to 25,000RPM G2.5. They offer a high-performance clamping solution and provide exceptional value whilst maintaining exceptional ...

    • Premium shrink fit chucks provide high performance
    • 4.5° taper
    • Through coolant: AD/B
    • Balanced to 25,000RPM G2.5
    • High run-out accuracy 0.003mm
    • For ultimate reliability, repeatability and machining quality
    • Ultra-long service life without distortion due to high quality hot work steel
    Diameter (mm)3 - 25

    From £131.74 £109.78

    View Products
    BT30 Morse Taper Chucks 15,000RPM G6.3 (YG-1)
    ENGINEERS CHOICE
    Our special selection of tooling solutions trusted by thousands of engineers across the UK and Ireland.
    ENGINEERS CHOICE
    Our special selection of tooling solutions trusted by thousands of engineers across the UK and Ireland.
    BT30 Morse Taper Chucks 15,000RPM G6.3 (YG-1)

    These high speed morse taper chucks are designed for use with tools that have a morse taper shank and come with a BT30 connection. YG-1 premium range tool holders offer the highest quality for ultimat...

    • Morse Taper Arbor
    • Balanced to 15,000RPM G6.3
    • Designed for use with tools that have a morse taper shank
    • Premium tool holders offering the highest quality machining
    • BT30 taper

    From £44.75 £37.29

    View Products
    ISO40 Morse Taper Chucks (Cutwel Pro)
    ENGINEERS CHOICE
    Our special selection of tooling solutions trusted by thousands of engineers across the UK and Ireland.
    ENGINEERS CHOICE
    Our special selection of tooling solutions trusted by thousands of engineers across the UK and Ireland.
    ISO40 Morse Taper Chucks (Cutwel Pro)

    Cutwel Pro morse taper chucks with a ISO40 connection are designed for use with tools that have a morse taper shank. The chucks offer high precision, exceptional durability, and easy installation. Ide...

    • ISO40 balanced to 15,000RPM G6.33.

    From £65.34 £54.45

    View Products