Chamfer Prep Milling Cutters | Cutwel - Milling Tool Specialist

4 Flute V7 Inox Variable Helix TiAlN Coated Carbide Chamfer Prep Weldon Shank End Mill - EMB42 (YG-1)

4 Flute V7 Inox Variable Helix TiAlN Coated Carbide Chamfer Prep Weldon Shank End Mill - EMB42 (YG-1)

The EMB42 series range from 3-20mm diameter. These end mills have 4 flutes and a flat/weldon shank. The V7 Inox range are TiALN coated carbide with variable helix design and inox flute geometry for si...

TiALN coated premium grade micrograin carbide
HPC (High performance cutting)
Higher speeds, deeper cuts and higher metal removal rates than standard cutters
Variable helix & unequal flute spacing eliminates vibration
Chamfer corner protection to prevent against tool chipping
Rough and finish with one tool
Longer tool life
Excellent for machining Stainless Steel, Titanium, Inconel and Low Hardness Steels

Size

Diameter (mm)	3 - 20
Overall Length (mm)	54 - 92
Flute Length (mm)	7 - 26
Shank (mm)	6 - 20

From £21.46 £17.88

View Products

4 Flute V7 Inox Variable Helix TiAlN Coated Carbide Chamfer Prep Weldon Shank End Mill - EMB39 (YG-1)

4 Flute V7 Inox Variable Helix TiAlN Coated Carbide Chamfer Prep Weldon Shank End Mill - EMB39 (YG-1)

The EMB39 series range from 3-25mm diameter. These end mills have 4 flutes and a flat/weldon shank. The V7 Inox range are TiALN coated carbide with variable helix design and inox flute geometry for si...

TiALN coated premium grade micrograin carbide
HPC (High performance cutting)
Higher speeds, deeper cuts and higher metal removal rates than standard cutters
Variable helix & unequal flute spacing eliminates vibration
Chamfer corner protection to prevent against tool chipping
Rough and finish with one tool
Longer tool life
Excellent for machining Stainless Steel, Titanium, Inconel and Low Hardness Steels

Size

Diameter (mm)	4 - 20
Overall Length (mm)	57 - 104
Flute Length (mm)	11 - 38
Shank (mm)	6 - 20

From £24.29 £20.24

View Products

5 Flute V7 Inox Variable Helix TiAlN Coated Carbide Chamfer Prep Plain Shank End Mill - EMB72 (YG-1)

5 Flute V7 Inox Variable Helix TiAlN Coated Carbide Chamfer Prep Plain Shank End Mill - EMB72 (YG-1)

The EMB72 series has 5 flutes ideal for finishing or high feed profiling. Diameters range from 6-25mm. These have a plain shank. The V7 Inox range are TiALN coated carbide with variable helix design a...

TiALN coated premium grade micrograin carbide
HPC (High performance cutting)
Higher speeds, deeper cuts and higher metal removal rates than standard cutters
Variable helix & unequal flute spacing eliminates vibration
5 Flutes ideal for finishing or high feed profiling
Chamfer corner protection to prevent against tool chipping
Rough and finish with one tool
Longer tool life
Excellent for machining Stainless Steel, Titanium, Inconel and Low Hardness Steels

Size

Diameter (mm)	6 - 25
Overall Length (mm)	57 - 104
Flute Length (mm)	13 - 38
Shank (mm)	6 - 25

From £29.40 £24.50

View Products

4 Flute V7 Plus Coated Carbide Multiple Helix Chamfer Prep Plain Shank End Mill - GMF52/GMF56 (YG-1)

4 Flute V7 Plus Coated Carbide Multiple Helix Chamfer Prep Plain Shank End Mill - GMF52/GMF56 (YG-1)

GMF52/GMF56 series CHAMFER EDGE PREP end mills are available from 3-20mm diameter with a plain shank. The V7 plus range from YG-1 offer the highest metal removal rates and silent machining of steels,...

Y1200 coated ultrafine micrograin carbide
HPC (High performance cutting)
Multiple helix geometries and unequal flute spacing enable higher feed rates and larger cut depths
Helix & unequal flute spacing reduces vibration
High heat resistance of Y1200 coating ensures exceptional tool life in stainless steel, titanium and HRSA machining
Chamfer corner protection to prevent against tool chipping

Size

Diameter (mm)	3 - 25
Overall Length (mm)	54 - 104
Flute Length (mm)	7 - 38
Shank (mm)	6 - 25

From £21.60 £18.00

View Products

4 Flute V7 Plus Coated Carbide Multiple Helix Chamfer Prep Weldon Shank End Mill - GMF53/GMF57 (YG-1)

4 Flute V7 Plus Coated Carbide Multiple Helix Chamfer Prep Weldon Shank End Mill - GMF53/GMF57 (YG-1)

GMF53/GMF57 series CHAMFER EDGE PREP end mills are available from 3-20mm diameter with a Weldon shank. The V7 plus range from YG-1 offer the highest metal removal rates and silent machining of steels...

Y1200 coated ultrafine micrograin carbide
HPC (High performance cutting)
Multiple helix geometries and unequal flute spacing enable higher feed rates and larger cut depths
Helix & unequal flute spacing reduces vibration
High heat resistance of Y1200 coating ensures exceptional tool life in stainless steel, titanium and HRSA machining
Chamfer corner protection to prevent against tool chipping

Size

Diameter (mm)	3 - 25
Overall Length (mm)	54 - 104
Flute Length (mm)	7 - 38
Shank (mm)	6 - 25

From £21.60 £18.00

View Products

4 Flute V7 Plus Coated Carbide Reduced Neck Multiple Helix Chamfer Prep Plain Shank End Mill - GMF60 (YG-1)

4 Flute V7 Plus Coated Carbide Reduced Neck Multiple Helix Chamfer Prep Plain Shank End Mill - GMF60 (YG-1)

GMF60 series chamfer edge prep end mills are available from 3-20mm diameter with a plain shank. The neck of the cutter is reduced in diameter to prevent interference with the workpiece. The V7 plus r...

Y1200 coated ultrafine micrograin carbide
HPC (High performance cutting)
Multiple helix geometries and unequal flute spacing enable higher feed rates and larger cut depths
Helix & unequal flute spacing reduces vibration
High heat resistance of Y1200 coating ensures exceptional tool life in stainless steel, titanium and HRSA machining
Chamfer corner protection to prevent against tool chipping

Size

Diameter (mm)	3 - 20
Overall Length (mm)	54 - 164
Flute Length (mm)	7 - 38
Shank (mm)	6 - 20

From £22.54 £18.78

View Products

4 Flute V7 Plus Coated Carbide Reduced Neck Multiple Helix Chamfer Prep Weldon Shank End Mill - GMF61 (YG-1)

4 Flute V7 Plus Coated Carbide Reduced Neck Multiple Helix Chamfer Prep Weldon Shank End Mill - GMF61 (YG-1)

GMF61 series chamfer edge prep end mills are available from 3-20mm diameter with a Weldon shank. The neck of the cutter is reduced in diameter to prevent interference with the workpiece. The V7 plus ...

Y1200 coated ultrafine micrograin carbide
HPC (High performance cutting)
Multiple helix geometries and unequal flute spacing enable higher feed rates and larger cut depths
Helix & unequal flute spacing reduces vibration
High heat resistance of Y1200 coating ensures exceptional tool life in stainless steel, titanium and HRSA machining
Chamfer corner protection to prevent against tool chipping

Size

Diameter (mm)	3 - 20
Overall Length (mm)	54 - 164
Flute Length (mm)	7 - 38
Shank (mm)	6 - 20

From £22.54 £18.78

View Products

3 Flute Alu-Power Carbide Chamfer Prep Plain Shank Alu Pitch Rougher - E5742 (YG-1)

The E5742 series carbide Alu-Power rippers from YG-1 range from 6-25mm in diameter. These plain shank 3 flute rougher cutters have an aluminium pitch to prevent built up edge. These are ideal for heav...

Suitable for high speed machining of aluminium and other non-ferrous materials.

Special geometries & lapped flutes ensures the best chip control and surface finish on aluminium.

Deep flute pockets prevent swarf clogging up the tool.

Aluminium pitch prevents built up edge.

Micrograin Carbide Substrate.

Sharp cutting edges with mirror finish machining.

Ultra-high metal removal rates possible with WAVE-CUT.

Size

Diameter (mm)	6 - 25
Overall Length (mm)	57 - 121
Flute Length (mm)	16 - 45
Shank (mm)	6 - 25

From £39.41 £32.84

View Products

3 Flute Alu-Power Carbide Chamfer Prep Weldon Shank Alu Pitch Rougher - E5711 (YG-1)

The E5711 series carbide Alu-Power rippers from YG-1 range from 6-25mm in diameter. These flat/weldon shank 3 flute rougher cutters have an aluminium pitch to prevent built up edge. These are ideal fo...

Suitable for high speed machining of aluminium and other non-ferrous materials.

Special geometries & lapped flutes ensures the best chip control and surface finish on aluminium.

Deep flute pockets prevent swarf clogging up the tool.

Aluminium pitch prevents built up edge.

Micrograin Carbide Substrate.

Sharp cutting edges with mirror finish machining.

Ultra-high metal removal rates possible with WAVE-CUT.

Size

Diameter (mm)	6 - 25
Overall Length (mm)	57 - 121
Flute Length (mm)	16 - 45
Shank (mm)	6 - 25

From £39.41 £32.84

View Products

3 Flute 37 Degree Helix Alu-Cut Uncoated HSS 8% Cobalt Standard Length Ripper - E2755 (YG-1)

The YG-1 E2755 series Premium HSS Milling Cutter has 3 flutes and a weldon shank. These rippers range in diameter from 6-25mm and have a special Alu-Cut geomotry with a 37 Degree Helix angle. The Supe...

Exceptional value and tool life.
Available with a weldon shank.
Alu-Cut geomotry makes this cutter ideal for non-ferrous machining.
Ideal for roughing applications.
Wide range of geomotries and sizes available for a variety of milling applications.
Uncoated to prevent 'sticking' of material to cutter.
HSS 8% cobalt content ideal for tougher steels or where longer tool life is required.

Size

Diameter (mm)	6 - 22
Overall Length (mm)	57 - 104
Flute Length (mm)	13 - 38
Shank (mm)	6 - 20

From £30.91 £25.76

View Products

3 Flute 37 Degree Helix Alu-Cut Uncoated HSS 8% Cobalt Long Length Ripper - E2756 (YG-1)

The YG-1 E2756 long series rippers range in diameter from 10-25mm and have a special extra coarse pitch and a 37 Degree Helix angle to prevent built-up edge when machining sticky matrials. The HSS 8% ...

Exceptional value and tool life.
Available with a weldon shank.
Alu-Cut geomotry makes this cutter ideal for non-ferrous machining.
Ideal for roughing applications.
Wide range of geomotries and sizes available for a variety of milling applications.
Uncoated to prevent 'sticking' of material to cutter.
HSS 8% cobalt content ideal for tougher steels or where longer tool life is required.

Size

Diameter (mm)	12 - 12
Overall Length (mm)	110 - 110
Flute Length (mm)	53 - 53
Shank (mm)	12 - 12

From £46.10 £38.42

View Products

1 Flute Lapped Plastic-Cut Uncoated Carbide Short Length Router Slot Drill - E5E47 (YG-1)

The YG-1 E5E47 series plastic cut has a single lapped flute design for excellent workpiece finish and chip evacuation. The wide, drawing up cut geometry is ideal for plastics such as ABS, acrylic and ...

Lapped Flute Design for Excellent Workpiece Finish
Single Flute for Excellent Chip Evacuation
Wide Cut Geometry for Dedicated Plastic Machining
Drawing Cut (Up Cut)
Router Style Cutter Prevents Chip Build Up in Flute Pockets

Size

Diameter (mm)	2 - 12
Overall Length (mm)	50 - 80
Flute Length (mm)	8 - 30
Shank (mm)	3 - 12

From £15.71 £13.09

View Products