Boring Bars for DC Style Inserts

SDQCR/L Steel Shank Boring Bar, for DCMT Inserts, 108 Degree Approach, Screw Clamp (Cutwel Pro)

Steel shank boring bar suitable for use with DCMT inserts (also suitable for use with DCGT, DCGW, DCET, DCHT inserts). The SDQCR/L series has a screw clamp system available in left hand and right hand...

Suitable for use with DCMT inserts (also suitable for use with DCGT, DCGW, DCET, DCHT etc)
Right & left hand, 108 degree approach
Screw clamp system for simple changeover with wrench and screw

Shank (mm)	10 - 32

From £8.83 £7.36

View Products

SDUCR/L Carbide Shank Boring Bar, for DCMT Inserts, 93° Approach, Screw On Clamp (Korloy)

High quality solid carbide shank boring bar suitable for use with DCMT style turning inserts (also suitable for DCGT, DCGW, DCET, DCHT etc). Carbide shank boring bars offer higher levels of rigidty co...

Carbide shank boring bars offer higher levels of rigidty for high accuracy and vibration free deep hole machining
Suitable for use with DCMT style turning inserts (also suitable for DCGT, DCGW, DCET, DCHT etc)
High quality solid carbide shank boring bar with 93 degree approach angle
Screw on clamping system for simple changeover with wrench and screw
Made by Korloy from a high quality carbide for the highest accuracy and rigidity. For the best performance it is recommended to clamp on a 1/3 of the bar's length, as a minimum.
Korloy are South Korea's leading manufacturer of high quality indexable tooling

Overall Length (mm)	125 - 300
Shank (mm)	10 - 25

From £157.45 £131.21

View Products

SDQCR/L Steel Shank Boring Bar, for DCMT Inserts, 107.5° Approach, Screw On Clamp (Teknik)

Excellent value solid steel shank boring bar suitable for use with DCMT style turning inserts (also suitable for DCGT, DCGW, DCET, DCHT etc). The SDQCR/L have a Screw On Clamp style clamping system wi...

Suitable for use with DCMT style turning inserts (also suitable for DCGT, DCGW, DCET, DCHT etc
Excellent value solid steel shank boring bar with 108 degree approach angle
Screw on clamping system for simple changeover with wrench and screw
For the best performance it is recommended to clamp on a 1/3 of the bar's length, as a minimum.
Made by Teknik, offering excellent value and cost efficiency

Overall Length (mm)	110 - 300
Shank (mm)	10 - 40

From £22.68 £18.90

View Products

SDZCR/L Steel Shank Boring Bar, for DCMT Inserts, 5° Approach, Screw On Clamp (Teknik)

Excellent value solid steel shank boring bar suitable for use with DCMT style turning inserts (also suitable for DCGT, DCGW, DCET, DCHT etc). The SDZCR/L have a Screw On Clamp style clamping system wi...

Suitable for use with DCMT style turning inserts (also suitable for DCGT, DCGW, DCET, DCHT etc
Excellent value solid steel shank boring bar with 95 degree approach angle
Screw on clamping system for simple changeover with wrench and screw
For the best performance it is recommended to clamp on a 1/3 of the bar's length, as a minimum.
Made by Teknik, offering excellent value and cost efficiency

Overall Length (mm)	125 - 200
Shank (mm)	12 - 25

From £36.31 £30.26

View Products

SDUCR/L Carbide Shank Through Coolant Boring Bar, for DCMT Inserts, 93° Approach, Screw On Clamp (Teknik)

Excellent value through coolant carbide shank boring bar suitable for use with DCMT style turning inserts (also suitable for DCGT, DCGW, DCET, DCHT etc). Carbide shank boring bars offer higher levels ...

Carbide shank boring bars offer higher levels of rigidty for high accuracy and vibration free deep hole machining
Through coolant boring bar prolongs tool life by directing coolant right to the cutting edge whilst also assisting with swarf evacuation
Suitable for use with DCMT style turning inserts (also suitable for DCGT, DCGW, DCET, DCHT etc)
Excellent value through coolant carbide shank boring bar with 93 degree approach angle
Screw on clamping system for simple changeover with wrench and screw
For the best performance it is recommended to clamp on a 1/3 of the bar's length, as a minimum.
Made by Teknik, offering excellent value and cost efficiency

Overall Length (mm)	125 - 250
Shank (mm)	10 - 20

From £114.62 £95.52

View Products

3 Piece SDUCR/L Boring Bar Set - Includes 10, 12, 16mm Solid Steel Shanks, 93 Degree Approach, Screw On Clamp for DCMT Inserts - SDUCR/L Series (Teknik)

General purpose 3 piece set includes 10, 12, 16mm shank SDUCR/L steel shank boring bars. Suitable for use with DCMT style turning inserts (also suitable for DCGT, DCGW, DCET, DCHT etc). The SDUCR/L se...

3 piece set includes 10, 12, 16mm shank boring bars
Suitable for use with DCMT style turning inserts (also suitable for DCGT, DCGW, DCET, DCHT etc
Excellent value solid steel shank boring bars with 93 degree approach angle
Strong lever lock style clamping system - the most common clamping system for general machining with quick and simple changeover of inserts
Made by Teknik, offering excellent value and cost efficiency

From £52.55 £43.79

View Products

SDUCR/L Steel Shank Boring Bar, for DCMT Inserts, 93° Approach, Screw On Clamp (YG-1)

General purpose solid steel shank boring bar suitable for use with DCMT style turning inserts (also suitable for DCGT, DCGW, DCET, DCHT etc). The SDUCR/L have a Screw On Clamp style clamping system wi...

Suitable for use with DCMT style turning inserts (also suitable for DCGT, DCGW, DCET, DCHT etc
General purpose solid steel shank boring bars with boring bar with 93 degree approach angle
Screw on clamping system for simple changeover with wrench and screw
For the best performance it is recommended to clamp on a 1/3 of the bar's length, as a minimum.
Made by YG-1, global marketing leading manufacturer of cutting tools

Overall Length (mm)	125 - 300
Shank (mm)	10 - 40

From £30.49 £25.41

View Products

SDQCR/L Steel Shank Boring Bar, Through Coolant, for DCMT Inserts, 108° Approach, Screw On Clamp (Teknik)

Excellent value through coolant steel shank boring bar suitable for use with DCMT style turning inserts (also suitable for DCGT, DCGW, DCET, DCHT etc) Through coolant boring bars prolong tool life by ...

Through coolant boring bar prolongs tool life by directing coolant right to the cutting edge whilst also assisting with swarf evacuation
Suitable for use with DCMT style turning inserts (also suitable for DCGT, DCGW, DCET, DCHT etc)
Excellent value through coolant steel shank boring bar with 108 degree approach angle
Screw on clamping system for simple changeover with wrench and screws
For the best performance it is recommended to clamp on a 1/3 of the bar's length, as a minimum.
Made by Teknik, offering excellent value and cost efficiency

Overall Length (mm)	110 - 200
Shank (mm)	10 - 25

From £36.31 £30.26

View Products

SDUCR/L Steel Shank Boring Bar, Through Coolant, for DCMT Inserts, 93° Approach, Screw On Clamp (Teknik)

Excellent value through coolant steel shank boring bar suitable for use with DCMT style turning inserts (also suitable for DCGT, DCGW, DCET, DCHT etc) Through coolant boring bars prolong tool life by ...

Through coolant boring bar prolongs tool life by directing coolant right to the cutting edge whilst also assisting with swarf evacuation
Suitable for use with DCMT style turning inserts (also suitable for DCGT, DCGW, DCET, DCHT etc)
Excellent value through coolant steel shank boring bar with 93 degree approach angle
Screw on clamping system for simple changeover with wrench and screws
For the best performance it is recommended to clamp on a 1/3 of the bar's length, as a minimum.
Made by Teknik, offering excellent value and cost efficiency

Overall Length (mm)	110 - 300
Shank (mm)	10 - 32

From £36.31 £30.26

View Products

SDQCR/L Steel Shank Boring Bar, Through Coolant, for DCMT Inserts, 108° Approach, Screw On Clamp (Korloy)

High quality through coolant steel shank boring bar suitable for use with DCMT style turning inserts (also suitable for DCGT, DCGW, DCET, DCHT etc) Through coolant boring bars prolong tool life by dir...

Through coolant boring bar prolongs tool life by directing coolant right to the cutting edge whilst also assisting with swarf evacuation
Suitable for use with DCMT style turning inserts (also suitable for DCGT, DCGW, DCET, DCHT etc)
High quality through coolant steel shank boring bar with 108 degree approach angle
Screw on clamping system for simple changeover with wrench and screws
Made by Korloy from a high grade steel for the highest accuracy and rigidity. For the best performance it is recommended to clamp on a 1/3 of the bar's length, as a minimum.
Korloy are South Korea's leading manufacturer of high quality indexable tooling

Overall Length (mm)	100 - 200
Shank (mm)	10 - 25

From £79.93 £66.61

View Products

SDUCR/L Steel Shank Boring Bar, for DCMT Inserts, 93 Degree Approach, Screw Clamp (Cutwel Pro)

Steel shank boring bar suitable for use with DCMT inserts (also suitable for use with DCGT, DCGW, DCET, DCHT inserts). The SDUCR/L series has a screw clamp system available in left hand and right hand...

Suitable for use with DCMT inserts (also suitable for use with DCGT, DCGW, DCET, DCHT etc)
Right & left hand, 93 degree approach
Screw clamp system for simple changeover with wrench and screw

Shank (mm)	10 - 32

From £8.83 £7.36

View Products

SDUCR/L Steel Shank Boring Bar, for DCMT Inserts, 93° Approach, Screw On Clamp (Teknik)

Excellent value solid steel shank boring bar suitable for use with DCMT style turning inserts (also suitable for DCGT, DCGW, DCET, DCHT etc). The SDUCR/L have a Screw On Clamp style clamping system wi...

Suitable for use with DCMT style turning inserts (also suitable for DCGT, DCGW, DCET, DCHT etc
Excellent value solid steel shank boring bar with 93 degree approach angle
Screw on clamping system for simple changeover with wrench and screw
For the best performance it is recommended to clamp on a 1/3 of the bar's length, as a minimum.
Made by Teknik, offering excellent value and cost efficiency

Overall Length (mm)	110 - 300
Shank (mm)	10 - 32

From £22.68 £18.90

View Products

SDUCR/L Steel Shank Boring Bar, Through Coolant, for DCMT Inserts, 93° Approach, Screw On Clamp (Korloy)

High quality through coolant steel shank boring bar suitable for use with DCMT style turning inserts (also suitable for DCGT, DCGW, DCET, DCHT etc) Through coolant boring bars prolong tool life by dir...

Through coolant boring bar prolongs tool life by directing coolant right to the cutting edge whilst also assisting with swarf evacuation
Suitable for use with DCMT style turning inserts (also suitable for DCGT, DCGW, DCET, DCHT etc)
High quality through coolant steel shank boring bar with 93 degree approach angle
Screw on clamping system for simple changeover with wrench and screws
Made by Korloy from a high grade steel for the highest accuracy and rigidity. For the best performance it is recommended to clamp on a 1/3 of the bar's length, as a minimum.
Korloy are South Korea's leading manufacturer of high quality indexable tooling

Overall Length (mm)	100 - 350
Shank (mm)	10 - 40

From £79.93 £66.61

View Products

SDQCR/L Steel Shank Boring Bar, for DCMT Inserts, 108° Approach, Screw On Clamp (Korloy)

High quality solid steel shank boring bar suitable for use with DCMT style turning inserts (also suitable for DCGT, DCGW, DCET, DCHT etc). The SDQCR/L have a Screw On Clamp style clamping system with ...

Suitable for use with DCMT style turning inserts (also suitable for DCGT, DCGW, DCET, DCHT etc
High quality solid steel shank boring bar with 108 degree approach angle
Screw on clamping system for simple changeover with wrench and screw
Made by Korloy from a high grade steel for the highest accuracy and rigidity. For the best performance it is recommended to clamp on a 1/3 of the bar's length, as a minimum.
Korloy are South Korea's leading manufacturer of high quality indexable tooling

Overall Length (mm)	150 - 450
Shank (mm)	10 - 50

From £51.60 £43.00

View Products

SDUCR/L Steel Shank Boring Bar, for DCMT Inserts, 93° Approach, Screw On Clamp (Korloy)

High quality solid steel shank boring bar suitable for use with DCMT style turning inserts (also suitable for DCGT, DCGW, DCET, DCHT etc). The SDUCR/L have a Screw On Clamp style clamping system with ...

Suitable for use with DCMT style turning inserts (also suitable for DCGT, DCGW, DCET, DCHT etc
High quality solid steel shank boring bar with 93 degree approach angle
Screw on clamping system for simple changeover with wrench and screw
Made by Korloy from a high grade steel for the highest accuracy and rigidity. For the best performance it is recommended to clamp on a 1/3 of the bar's length, as a minimum.
Korloy are South Korea's leading manufacturer of high quality indexable tooling

Overall Length (mm)	150 - 450
Shank (mm)	10 - 50

From £51.60 £43.00

View Products

SDQCR/L Steel Shank Boring Bar, Through Coolant, for DCMT Inserts, 107.5° Approach, Screw On Clamp (YG-1)

General purpose through coolant steel shank boring bar suitable for use with DCMT style turning inserts (also suitable for DCGT, DCGW, DCET, DCHT etc) Through coolant boring bars prolong tool life by ...

Through coolant boring bar prolongs tool life by directing coolant right to the cutting edge whilst also assisting with swarf evacuation
Suitable for use with DCMT style turning inserts (also suitable for DCGT, DCGW, DCET, DCHT etc)
General purpose through coolant steel shank boring bar with 108 degree approach angle
Screw on clamping system for simple changeover with wrench and screws
For the best performance it is recommended to clamp on a 1/3 of the bar's length, as a minimum.
Made by YG-1, a global market leading manufacturer of cutting tools

Overall Length (mm)	125 - 300
Shank (mm)	10 - 32

From £38.12 £31.77

View Products

SDQCR/L Carbide Shank Boring Bar, for DCMT Inserts, 108° Approach, Screw On Clamp (Korloy)

High quality solid carbide shank boring bar suitable for use with DCMT style turning inserts (also suitable for DCGT, DCGW, DCET, DCHT etc). Carbide shank boring bars offer higher levels of rigidty co...

Carbide shank boring bars offer higher levels of rigidty for high accuracy and vibration free deep hole machining
Suitable for use with DCMT style turning inserts (also suitable for DCGT, DCGW, DCET, DCHT etc)
High quality solid carbide shank boring bar with 108 degree approach angle
Screw on clamping system for simple changeover with wrench and screw
Made by Korloy from a high quality carbide for the highest accuracy and rigidity. For the best performance it is recommended to clamp on a 1/3 of the bar's length, as a minimum.
Korloy are South Korea's leading manufacturer of high quality indexable tooling

Overall Length (mm)	125 - 250
Shank (mm)	8 - 20

From £138.16 £115.13

View Products

SDQCR/L Carbide Shank Through Coolant Boring Bar, for DCMT Inserts, 108° Approach, Screw On Clamp (Korloy)

High quality through coolant solid carbide shank boring bar suitable for use with DCMT style turning inserts (also suitable for DCGT, DCGW, DCET, DCHT etc). Carbide shank boring bars offer higher leve...

Carbide shank boring bars offer higher levels of rigidty for high accuracy and vibration free deep hole machining
Through coolant boring bar prolongs tool life by directing coolant right to the cutting edge whilst also assisting with swarf evacuation
Suitable for use with DCMT style turning inserts (also suitable for DCGT, DCGW, DCET, DCHT etc)
High quality through coolant carbide shank boring bar with 108 degree approach angle
Screw on clamping system for simple changeover with wrench and screw
Made by Korloy from a high quality carbide for the highest accuracy and rigidity. For the best performance it is recommended to clamp on a 1/3 of the bar's length, as a minimum.
Korloy are South Korea's leading manufacturer of high quality indexable tooling

Overall Length (mm)	125 - 250
Shank (mm)	8 - 20

From £182.35 £151.96

View Products

SDUCR/L Carbide Shank Through Coolant Boring Bar, for DCMT Inserts, 93° Approach, Screw On Clamp (Korloy)

High quality through coolant solid carbide shank boring bar suitable for use with DCMT style turning inserts (also suitable for DCGT, DCGW, DCET, DCHT etc). Carbide shank boring bars offer higher leve...

Carbide shank boring bars offer higher levels of rigidty for high accuracy and vibration free deep hole machining
Through coolant boring bar prolongs tool life by directing coolant right to the cutting edge whilst also assisting with swarf evacuation
Suitable for use with DCMT style turning inserts (also suitable for DCGT, DCGW, DCET, DCHT etc)
High quality through coolant carbide shank boring bar with 93 degree approach angle
Screw on clamping system for simple changeover with wrench and screw
Made by Korloy from a high quality carbide for the highest accuracy and rigidity. For the best performance it is recommended to clamp on a 1/3 of the bar's length, as a minimum.
Korloy are South Korea's leading manufacturer of high quality indexable tooling

Overall Length (mm)	125 - 300
Shank (mm)	10 - 25

From £198.98 £165.82

View Products

SDQCR/L Carbide Shank Through Coolant Boring Bar, for DCMT Inserts, 107.5° Approach, Screw On Clamp (Teknik)

Excellent value through coolant carbide shank boring bar suitable for use with DCMT style turning inserts (also suitable for DCGT, DCGW, DCET, DCHT etc). Carbide shank boring bars offer higher levels ...

Carbide shank boring bars offer higher levels of rigidty for high accuracy and vibration free deep hole machining
Through coolant boring bar prolongs tool life by directing coolant right to the cutting edge whilst also assisting with swarf evacuation
Suitable for use with DCMT style turning inserts (also suitable for DCGT, DCGW, DCET, DCHT etc)
Excellent value through coolant carbide shank boring bar with 108 degree approach angle
Screw on clamping system for simple changeover with wrench and screw
For the best performance it is recommended to clamp on a 1/3 of the bar's length, as a minimum.
Made by Teknik, offering excellent value and cost efficiency

Overall Length (mm)	125 - 250
Shank (mm)	10 - 20

From £107.88 £89.90

View Products

SDUCR/L Steel Shank Boring Bar, Through Coolant, for DCMT Inserts, 93° Approach, Screw On Clamp (YG-1)

General purpose through coolant steel shank boring bar suitable for use with DCMT style turning inserts (also suitable for DCGT, DCGW, DCET, DCHT etc) Through coolant boring bars prolong tool life by ...

Through coolant boring bar prolongs tool life by directing coolant right to the cutting edge whilst also assisting with swarf evacuation
Suitable for use with DCMT style turning inserts (also suitable for DCGT, DCGW, DCET, DCHT etc)
General purpose through coolant steel shank boring bar with 93 degree approach angle
Screw on clamping system for simple changeover with wrench and screws
For the best performance it is recommended to clamp on a 1/3 of the bar's length, as a minimum.
Made by YG-1, a global market leading manufacturer of cutting tools

Overall Length (mm)	125 - 250
Shank (mm)	10 - 32

From £38.12 £31.77

View Products

SDZCR/L Steel Shank Boring Bar, Through Coolant, for DCMT Inserts, 95° Approach, Screw On Clamp (Korloy)

High quality through coolant steel shank boring bar suitable for use with DCMT style turning inserts (also suitable for DCGT, DCGW, DCET, DCHT etc) Through coolant boring bars prolong tool life by dir...

Through coolant boring bar prolongs tool life by directing coolant right to the cutting edge whilst also assisting with swarf evacuation
Suitable for use with DCMT style turning inserts (also suitable for DCGT, DCGW, DCET, DCHT etc)
High quality through coolant steel shank boring bar with 95 degree approach angle
Screw on clamping system for simple changeover with wrench and screws
Made by Korloy from a high grade steel for the highest accuracy and rigidity. For the best performance it is recommended to clamp on a 1/3 of the bar's length, as a minimum.
Korloy are South Korea's leading manufacturer of high quality indexable tooling

Overall Length (mm)	250 - 250
Shank (mm)	32 - 32

From £161.30 £134.42

View Products

3 Piece SDQCR/L Boring Bar Set - Includes 10, 12, 16mm Solid Steel Shanks, 108 Degree Approach, Screw On Clamp for DCMT Inserts - SDQCR/L Series (Teknik)

General purpose 3 piece set includes 10, 12, 16mm shank SDQCR/L steel shank boring bars. Suitable for use with DCMT style turning inserts (also suitable for DCGT, DCGW, DCET, DCHT etc). The SDQCR/L se...

3 piece set includes 10, 12, 16mm shank boring bars
Suitable for use with DCMT style turning inserts (also suitable for DCGT, DCGW, DCET, DCHT etc
Excellent value solid steel shank boring bars with 108 degree approach angle
Strong lever lock style clamping system - the most common clamping system for general machining with quick and simple changeover of inserts
Made by Teknik, offering excellent value and cost efficiency

From £73.00 £60.83

View Products

SDUCR/L Carbide Shank Through Coolant Boring Bar, for DCMT Inserts, 93° Approach, Screw On Clamp (YG-1)

General purpose through coolant carbide shank boring bar suitable for use with DCMT style turning inserts (also suitable for DCGT, DCGW, DCET, DCHT etc). Carbide shank boring bars offer higher levels ...

Carbide shank boring bars offer higher levels of rigidty for high accuracy and vibration free deep hole machining
Through coolant boring bar prolongs tool life by directing coolant right to the cutting edge whilst also assisting with swarf evacuation
Suitable for use with DCMT style turning inserts (also suitable for DCGT, DCGW, DCET, DCHT etc)
General purpose through coolant carbide shank boring bar with 93 degree approach angle
Screw on clamping system for simple changeover with wrench and screw
For the best performance it is recommended to clamp on a 1/3 of the bar's length, as a minimum.
Made by YG-1, a global market leading manufacturer of cutting tools

Overall Length (mm)	125 - 200
Shank (mm)	10 - 20

From £205.82 £171.52

View Products

3 Piece SDQCR/L Offset Boring Bar Set - Includes 10, 12, 16mm Through Coolant Steel Shanks, 93 Degree Approach, Screw On Clamp for DCMT Inserts - SDQCR/L Series (Atorn)

Premium 3 piece set includes 10, 12, 16mm shank SDUCR/L through coolant steel shank boring bars. Suitable for use with DCMT style turning inserts (also suitable for DCGT, DCGW, DCET, DCHT etc). The SD...

3 piece set includes 10, 12, 16mm shank offset boring bars
Suitable for use with DCMT style turning inserts (also suitable for DCGT, DCGW, DCET, DCHT etc
Premium through coolant steel shank boring bars with 93 degree approach angle
Strong lever lock style clamping system - the most common clamping system for general machining with quick and simple changeover of inserts

From £591.32 £492.77

View Products

There are no products in your shopping basket.

Your Basket Summary

Suggestions

Products

Categories

Cutwel