Boring Bars for WN Style Inserts

DWLNR/L Steel Shank Boring Bar, for WNMG Inserts, 95° Approach, Double Clamp (Teknik)

Excellent value solid steel shank boring bar suitable for use with WNMG style turning inserts (also suitable for WNMA, WNMM, WNGA, WNGG etc). The DWLNR/L have a Double Clamp style clamping system with...

Suitable for use with WNMG style turning inserts (also suitable for WNMA, WNMM, WNGA, WNGG etc)
Excellent value solid steel shank boring bar with 95 degree approach angle
Ultra powerful double clamp style clamping system - high precision clamping system for longer tool life and excellent surface finish
For the best performance it is recommended to clamp on a 1/3 of the bar's length, as a minimum.
Made by Teknik, offering excellent value and cost efficiency

Overall Length (mm)	250 - 350
Shank (mm)	25 - 50

From £72.07 £60.06

View Products

PWLNR/L Steel Shank Boring Bar, Through Coolant, for WNMG Inserts, 95° Approach, Lever Lock (Teknik)

Excellent value through coolant steel shank boring bar suitable for use with WNMG style turning inserts (also suitable for WNMA, WNMM, WNGA, WNGG etc) Through coolant boring bars prolong tool life by ...

Through coolant boring bar prolongs tool life by directing coolant right to the cutting edge whilst also assisting with swarf evacuation
Suitable for use with WNMG style turning inserts (also suitable for WNMA, WNMM, WNGA, WNGG etc)
Excellent value through coolant steel shank boring bar with 95 degree approach angle
Strong lever lock style clamping system - the most common clamping system for general machining with quick and simple changeover of inserts
For the best performance it is recommended to clamp on a 1/3 of the bar's length, as a minimum.
Made by Teknik, offering excellent value and cost efficiency

Overall Length (mm)	180 - 300
Shank (mm)	16 - 40

From £57.66 £48.05

View Products

DWLNR/L Steel Shank Boring Bar, Through Coolant, for WNMG Inserts, 95° Approach, Double Clamp (Korloy)

High quality through coolant steel shank boring bar suitable for use with WNMG style turning inserts (also suitable for WNMA, WNMM, WNGA, WNGG etc) Through coolant boring bars prolong tool life by dir...

Through coolant boring bar prolongs tool life by directing coolant right to the cutting edge whilst also assisting with swarf evacuation
Suitable for use with WNMG style turning inserts (also suitable for WNMA, WNMM, WNGA, WNGG etc)
Excellent value through coolant steel shank boring bar with 95 degree approach angle
Ultra powerful double clamp style clamping system - high precision clamping system for longer tool life and excellent surface finish
For the best performance it is recommended to clamp on a 1/3 of the bar's length, as a minimum.
Made by Teknik, offering excellent value and cost efficiency

Overall Length (mm)	200 - 350
Shank (mm)	25 - 50

From £151.30 £126.08

View Products

MWLNR/L Steel Shank Boring Bar, for WNMG Inserts, 95° Approach, Multi Lock (Teknik)

Excellent value solid steel shank boring bar suitable for use with WNMG style turning inserts (also suitable for WNMA, WNMM, WNGA, WNGG etc). The MWLNR/L have a Multi Lock style clamping system with a...

Suitable for use with WNMG style turning inserts (also suitable for WNMA, WNMM, WNGA, WNGG etc)
Excellent value solid steel shank boring bar with 95 degree approach angle
Multi lock style clamping system
For the best performance it is recommended to clamp on a 1/3 of the bar's length, as a minimum.
Made by Teknik, offering excellent value and cost efficiency

Overall Length (mm)	180 - 350
Shank (mm)	16 - 50

From £70.76 £58.97

View Products

PWLNR/L Steel Shank Boring Bar, for WNMG Inserts, 95° Approach, Lever Lock (Teknik)

Excellent value solid steel shank boring bar suitable for use with WNMG style turning inserts (also suitable for WNMA, WNMM, WNGA, WNGG etc). The PWLNR/L have a Lever Lock style clamping system with a...

Suitable for use with WNMG style turning inserts (also suitable for WNMA, WNMM, WNGA, WNGG etc)
Excellent value solid steel shank boring bar with 95 degree approach angle
Strong lever lock style clamping system - the most common clamping system for general machining with quick and simple changeover of inserts
For the best performance it is recommended to clamp on a 1/3 of the bar's length, as a minimum.
Made by Teknik, offering excellent value and cost efficiency

Overall Length (mm)	200 - 300
Shank (mm)	16 - 40

From £51.35 £42.79

View Products

PWLNR/L Steel Shank Boring Bar, Through Coolant, for WNMG Inserts, 95° Approach, Lever Lock (Korloy)

High quality through coolant steel shank boring bar suitable for use with WNMG style turning inserts (also suitable for WNMA, WNMM, WNGA, WNGG etc) Through coolant boring bars prolong tool life by dir...

Through coolant boring bar prolongs tool life by directing coolant right to the cutting edge whilst also assisting with swarf evacuation
Suitable for use with WNMG style turning inserts (also suitable for WNMA, WNMM, WNGA, WNGG etc)
High quality through coolant steel shank boring bar with 95 degree approach angle
Strong lever lock style clamping system - the most common clamping system for general machining with quick and simple changeover of inserts
Made by Korloy from a high grade steel for the highest accuracy and rigidity. For the best performance it is recommended to clamp on a 1/3 of the bar's length, as a minimum.
Korloy are South Korea's leading manufacturer of high quality indexable tooling

Overall Length (mm)	300 - 300
Shank (mm)	25 - 25

From £132.61 £110.51

View Products

PWLNR/L Steel Shank Boring Bar, for WNMG Inserts, 95° Approach, Lever Lock (Korloy)

High quality solid steel shank boring bar suitable for use with WNMG style turning inserts (also suitable for WNMA, WNMM, WNGA, WNGG etc). The PWLNR/L have a Lever Lock style clamping system with a 95...

Suitable for use with WNMG style turning inserts (also suitable for WNMA, WNMM, WNGA, WNGG etc)
High quality solid steel shank boring bar with 95 degree approach angle
Strong lever lock style clamping system - the most common clamping system for general machining with quick and simple changeover of inserts
Made by Korloy from a high grade steel for the highest accuracy and rigidity. For the best performance it is recommended to clamp on a 1/3 of the bar's length, as a minimum.
Korloy are South Korea's leading manufacturer of high quality indexable tooling

Overall Length (mm)	180 - 400
Shank (mm)	16 - 40

From £85.60 £71.33

View Products

PWLNR/L Steel Shank Boring Bar, for WNMG Inserts, 95° Approach, Lever Lock (YG-1)

General purpose solid steel shank boring bar suitable for use with WNMG style turning inserts (also suitable for WNMA, WNMM, WNGA, WNGG etc). The PWLNR/L have a Lever Lock style clamping system with a...

Suitable for use with WNMG style turning inserts (also suitable for WNMA, WNMM, WNGA, WNGG etc)
General purpose solid steel shank boring bars with boring bar with 95 degree approach angle
Strong lever lock style clamping system - the most common clamping system for general machining with quick and simple changeover of inserts
For the best performance it is recommended to clamp on a 1/3 of the bar's length, as a minimum.
Made by YG-1, a global market leading manufacturer of cutting tools

Overall Length (mm)	200 - 400
Shank (mm)	20 - 50

From £68.62 £57.18

View Products

PWLNR/L Steel Shank Boring Bar, Through Coolant, for WNMG Inserts, 95° Approach, Lever Lock (YG-1)

General purpose through coolant steel shank boring bar suitable for use with WNMG style turning inserts (also suitable for WNMA, WNMM, WNGA, WNGG etc) Through coolant boring bars prolong tool life by ...

Through coolant boring bar prolongs tool life by directing coolant right to the cutting edge whilst also assisting with swarf evacuation
Suitable for use with WNMG style turning inserts (also suitable for WNMA, WNMM, WNGA, WNGG etc)
General purpose through coolant steel shank boring bar with 95 degree approach angle
Strong lever lock style clamping system - the most common clamping system for general machining with quick and simple changeover of inserts
For the best performance it is recommended to clamp on a 1/3 of the bar's length, as a minimum.
Made by YG-1, a global market leading manufacturer of cutting tools

Overall Length (mm)	250 - 350
Shank (mm)	25 - 50

From £99.11 £82.59

View Products

DWLNR/L Steel Shank Boring Bar, for WNMG Inserts, 95° Approach, Double Clamp (Korloy)

High quality solid steel shank boring bar suitable for use with WNMG style turning inserts (also suitable for WNMA, WNMM, WNGA, WNGG etc). The DWLNR/L have a Double Clamp style clamping system with a ...

Suitable for use with WNMG style turning inserts (also suitable for WNMA, WNMM, WNGA, WNGG etc)
High quality solid steel shank boring bar with 95 degree approach angle
Ultra powerful double clamp style clamping system - high precision clamping system for longer tool life and excellent surface finish
Made by Korloy from a high grade steel for the highest accuracy and rigidity. For the best performance it is recommended to clamp on a 1/3 of the bar's length, as a minimum.
Korloy are South Korea's leading manufacturer of high quality indexable tooling

Overall Length (mm)	400 - 400
Shank (mm)	40 - 40

From £252.26 £210.22

View Products

PWLNR/L Steel Shank Boring Bar, for WNMG Inserts, 95 Degree Approach, Lever Lock (Cutwel Pro)

Steel shank boring bar suitable for use with WNMG inserts (also suitable for use with WNMA, WNMM, WNGA, WNGG inserts). The PWLNR/L series has a lever lock system available in right hand and with a 95 ...

Suitable for use with WNMG inserts (also suitable for use with WNMA, WNMM, WNGA, WNGG inserts)
Right hand, 95 degree approach
Lever lock clamping system, quick and simple insert changeover

Shank (mm)	16 - 32

From £29.78 £24.82

View Products

There are no products in your shopping basket.

Your Basket Summary

Suggestions

Products

Categories

Cutwel