Free Next Day Delivery
on orders over £39 ex vat*

Expert Technical Team
Get advice on 01924 869 615

Same Day Despatch
On orders placed up to 6pm

Measuring & Inspection Special Offers – View Now

Digital 3 Point Pistol Grip Bore Micrometers

Digital 3 Point Pistol Grip Bore Micrometers

Our range of digital 3 point pistol grip bore micrometers from Insize and market leaders Mitutoyo and Bowers can measure inner areas or internal diameters of a component. Available in a pistol grip style for quick, simple and accurate measurements.

Filter By

9 Items

Sort By

Bowers Bluetooth XTHM-BT digital bore gauge is supplied in a 'pistol grip' style for quick, simple and accurate measurements. Bowers bore gauges offer an ergonomic design - including a larger and clea...

  • Ergonomic design with larger and clearer LCD display.
  • IP67 protection.
  • 0.001mm resolution.
  • UKAS certificates supplied as standard with all setting rings and gauges.
  • Proximity output with built-in Bluetooth.
  • Bore gauges manufactured according to DIN 863, part 4.
  • 2-6mm 2 point measurement / 6-300mm 3 point measurement.
  • Bi-directional communication.
  • Self-centring heads.
  • Tungsten carbide measuring faces on all 3-point heads from 12.5mm.
  • Extensions available above 6mm for deep hole measurement.

From £1,064.88 £887.40

The Mitutoyo 568 Series ABSOLUTE Digimatic Borematic Snap-Open Bore Gauge has a snap-type digital display and is an inside-diameter measuring instrument that allows easy and speedy measurement by leve...

  • A snap-type digital display, inside-diameter measuring allows easy and speedy measurement by lever operation.
  • Titanium-coated measuring pins provide excellent durability and impact resistance and allow the instrement to measure right to the bottom of a blind hole.
  • Three-Point contact measuring head enables highly repeatable measurement data to be obtained.
  • The ABSOLUTE linear encoder eliminates overspeed errors.
  • GO/NO-GO judgement function.
  • Dial HOLD function buttons, optimally located, enable high operability.
  • 330° rotatable display unit for easy reading at any angle.
  • Digimatic output port enables inclusion in a statistical process control or networked measurement system.
  • Interchangable-Head Bore Gauges are available in part sets and full sets.

From £1,368.00 £1,140.00

The Mitutoyo 568 Series ABSOLUTE Digimatic Borematic Snap-Open Interchangeable-Head Bore Gauge Set contains a variety of Bore Gauges that have snap-type digital display and an are inside-diameter meas...

  • A snap-type digital display, inside-diameter measuring allows easy and speedy measurement by lever operation.
  • Titanium-coated measuring pins provide excellent durability and impact resistance and allow the instrement to measure right to the bottom of a blind hole.
  • Three-Point contact measuring head enables highly repeatable measurement data to be obtained.
  • The ABSOLUTE linear encoder eliminates overspeed errors.
  • GO/NO-GO judgement function.
  • Dial HOLD function buttons, optimally located, enable high operability.
  • 330° rotatable display unit for easy reading at any angle.
  • Digimatic output port enables inclusion in a statistical process control or networked measurement system.
  • Interchangable-Head Bore Gauges are available in part sets and full sets.

From £2,004.00 £1,670.00

The Mitutoyo 568 Series ABSOLUTE Digimatic Borematic Snap-Open Bore Gauge Set contains a variety of Bore Gauges that have snap-type digital display and an are inside-diameter measuring instruments tha...

  • A snap-type digital display, inside-diameter measuring allows easy and speedy measurement by lever operation.
  • Titanium-coated measuring pins provide excellent durability and impact resistance and allow the instrement to measure right to the bottom of a blind hole.
  • Three-Point contact measuring head enables highly repeatable measurement data to be obtained.
  • The ABSOLUTE linear encoder eliminates overspeed errors.
  • GO/NO-GO judgement function.
  • Dial HOLD function buttons, optimally located, enable high operability.
  • 330° rotatable display unit for easy reading at any angle.
  • Digimatic output port enables inclusion in a statistical process control or networked measurement system.
  • Interchangable-Head Bore Gauges are available in part sets and full sets.

From £3,780.00 £3,150.00

Bowers Bluetooth XTHI-BT digital bore gauge is supplied in a 'pistol grip' style for quick, simple and accurate measurements. Bowers bore gauges offer an ergonomic design - including a larger and clea...

  • Ergonomic design with larger and clearer LCD display.
  • IP67 protection.
  • 0.00005" resolution.
  • UKAS certificates supplied as standard with all setting rings and gauges.
  • Proximity output with built-in Bluetooth.
  • Bore gauges manufactured according to DIN 863, part 4.
  • 2-6mm 2 point measurement / 6-300mm 3 point measurement.
  • Bi-directional communication.
  • Self-centring heads.
  • Tungsten carbide measuring faces on all 3-point heads from 12.5mm.
  • Extensions available above 6mm for deep hole measurement.

From £1,183.20 £986.00

Bowers Bluetooth SXTHM-BT digital bore gauge sets contain varying numbers of digital display units, measuring heads and setting rings, as well as UKAS calibration. Bowers bore gauges offer an ergonomi...

  • Supplied with varying numbers of measuring heads and setting rings.
  • Ergonomic design with larger and clearer LCD display.
  • IP67 protection.
  • 0.001mm resolution.
  • UKAS certificates supplied as standard with all setting rings and gauges.
  • Proximity output with built-in Bluetooth.
  • Bore gauges manufactured according to DIN 863, part 4.
  • 2-6mm 2 point measurement / 6-300mm 3 point measurement.
  • Supplied in fitted wooden case.
  • Bi-directional communication.
  • Tungsten carbide measuring faces on all 3-point heads from 12.5mm.
  • Extensions available above 6mm for deep hole measurement.
  • Self-centring heads.

From £1,286.82 £1,072.35

Bowers Bluetooth SXTHI-BT digital bore gauge sets contain varying numbers of digital display units, measuring heads and setting rings, as well as UKAS calibration. Bowers bore gauges offer an ergonomi...

  • Supplied with varying numbers of measuring heads and setting rings.
  • Ergonomic design with larger and clearer LCD display.
  • IP67 protection.
  • 0.00005" resolution.
  • UKAS certificates supplied as standard with all setting rings and gauges.
  • Proximity output with built-in Bluetooth.
  • Bore gauges manufactured according to DIN 863, part 4.
  • 2-6mm 2 point measurement / 6-300mm 3 point measurement.
  • Supplied in fitted wooden case.
  • Bi-directional communication.
  • Tungsten carbide measuring faces on all 3-point heads from 12.5mm.
  • Extensions available above 6mm for deep hole measurement.
  • Self-centring heads.

From £1,429.80 £1,191.50

The Insize 2124 Internal 3 point bore micrometer, with pistol grip action and carbide/steel measuring faces create a durable, wear resistant tool which allows for repeated measurements. Sizes range up...

  • Steel/carbide measuring points.
  • Extension rod included.
  • Setting ring included (upto 100mm).
  • Optional accessory: digital indicator (code 2103-10F), dial indicator, setting ring (code 6312).

From £296.64 £247.20

The Insize 2124 Internal 3 point bore micrometer set, with pistol grip action and carbide/steel measuring faces create a durable, wear resistant tool which allows for repeated measurements. Sizes rang...

  • Steel/carbide measuring points.
  • Extension rod included.
  • Setting ring included.
  • Optional accessory: digital indicator (code 2103-10F), dial indicator.

From £550.08 £458.40

Filter By

9 Items

Sort By