Free Next Day Delivery
on orders over £59 ex vat*

Expert Technical Team
Get advice on 01924 869 615

Same Day Despatch
On orders placed up to 5.45pm

Vernier Calipers

Vernier Calipers

Vernier calipers from Insize and Mitutoyo. Different sizes available including mini and long jaw calipers and for both inside and outside measurements.

Read More
Filter By arrow
carrat-down

32 Items

Sort By
carrat-down
sort-descending

The 1223 Insize Vernier Caliper with Thumb Clamp is made of stainless steel and has a satin chrome plated reading surface....

  • Meet DIN862.
  • With thumb clamp.
  • Made of stainless steel.
  • Satin chrome plated reading surface.

From £32.93 £27.44

This vernier caliper by Moore & Wright is made of hardened stainless steel and has a fine adjustment with 4-way measurement....

  • Standard workshop model with stop screw
  • Standard DIN 862
  • Chromed scale with laser engraved graduations
  • Made of hardened stainless steel
  • Measuring surface is micro-lapped
  • Packed in plastic box
  • Fine adjustment and 4-way measurement

From £33.60 £28.00

This vernier caliper by Moore & Wright is made of hardened stainless steel and has a fine adjustment with 4-way measurement....

  • Standard workshop model with stop screw
  • Standard DIN 862
  • Chromed scale with laser engraved graduations
  • Made of hardened stainless steel
  • Measuring surface is micro-lapped
  • Packed in plastic box
  • Fine adjustment and 4-way measurement

From £35.04 £29.20

The Insize 1205 caliper is made from stainless steel with a chrome finish for longer tool life and durability from machine shop wear, with both inside and outside jaws for measurements. The Calipers h...

  • Made of stainless steel.
  • Satin chrome plated reading surface.

From £29.03 £24.19

Vernier caliper with prismatic measuring arm, for measuring 3-edged workpieces, eg. milling tools. Scale and vernier scale with anti-glare, brushed chronium plated finish. Measuring and guiding surfac...

  • For measuring 3-edged workpieces, e.g. milling tools
  • Scale and vernier scale with anti-glare, brushed chromium plated finish
  • Measuring and guiding surfaces hardened
  • Delivered in a case
  • Measuring range: 0-40mm
  • Calibration group: On-demand
  • Vernier scale: 0.05mm
  • Length of jaw: 40mm
  • Opening angle: 60°
  • With locking screw
  • Gross weight: 284g

From £119.75 £99.79

The Mahr 16FN series Pocket Vernier Caliper measures external, internal, step and depth dimensions. Outstanding sliding properties of the spool thanks to precisely lapped guide rails for consistent, s...

  • Pocket Vernier Caliper
  • For measuring external, internal, step and depth dimensions.
  • Scale and vernier scale with anti-glare, brushed chromium-plated finish
  • Hardened measuring and bearing surfaces
  • Outstanding sliding properties of the spool thanks to precisely lapped guide rails for consistent, sensitive measurement.
  • Delivered in a case

From £39.18 £32.65

Vernier caliper with prismatic measuring arm, for measuring 5-edged workpieces, eg. milling tools. Scale and vernier scale with anti-glare, brushed chronium plated finish. Measuring and guiding surfac...

  • For measuring 5-edged workpieces, e.g. milling tools
  • Scale and vernier scale with anti-glare, brushed chromium plated finish
  • Measuring and guiding surfaces hardened
  • Delivered in a case
  • Measuring range: 0-40mm
  • Calibration group: On-demand
  • Vernier scale: 0.05mm
  • Length of jaw: 40mm
  • Opening angle: 108°
  • With locking screw
  • Gross weight: 287g

From £119.75 £99.79

The Insize 1205 caliper is made from stainless steel with a chrome finish for longer tool life and durability from machine shop wear, with both inside and outside jaws for measurements. The Calipers h...

  • Made of stainless steel.
  • Satin chrome plated reading surface.

From £29.03 £24.19

The 530 Series Vernier Caliper has a stepped graduation face that prevents dust ingress between the main scale & slider. The small vernier face angle (14°) provides easy reading and carbide-tipped ja...

  • Range: up to 1000mm.
  • Made by Mitutoyo - Market leader in the engineering measuring tool sector.
  • Stepped graduation face prevents dust ingress between the main scale and slider.
  • The small vernier face angle (14°) provides easy reading.
  • Can measure outside and inside dimensions, depth, and steps.
  • Carbide-tipped jaw calipers give the longest life when measuring rough finished parts, castings, grinding wheels, etc.
  • All models are supplied with carbide tipped jaws (EXCEPT 530-102, 530-101, 530-108, 530-109, 530-501, 530-502, 530-104, 530-115)
  • Decimal and fractional graduated scales (metric/inch and inch models only).

From £41.62 £34.68

This 536 Series caliper has a moving jaw which can be rotated to measure sectioned shafts. Mitutoyo calipers are robust and of the highest quality....

  • Range: 0-200mm.
  • Accuracy: ±0.05mm.
  • Graduation: 0.02mm.
  • Made by Mitutoyo - Market leader in the engineering measuring tool sector.
  • The moving jaw can be rotated to measure sectioned shafts.
  • Can measure outside and inside dimensions, depth, and steps.

From £478.27 £398.56

This 536 Series caliper can measure the width of grooves and lands inside bores and recesses. Mitutoyo calipers are robust and of the highest quality....

  • Range: 0-200mm.
  • Accuracy: ±0.03mm.
  • Graduation: 0.02mm.
  • Made by Mitutoyo - Market leader in the engineering measuring tool sector.
  • Can measure width of grooves and lands inside bores and recesses.

From £532.20 £443.50

This 536 Series caliper has a beam-mounted jaw which is a round bar that facilitates measurements of tube wall and thickness. Mitutoyo calipers are robust and of the highest quality....

  • Range: 0-150mm.
  • Accuracy: ±0.05mm.
  • Graduation: 0.05mm.
  • Made by Mitutoyo - Market leader in the engineering measuring tool sector.
  • The beam-mounted jaw is a round bar that facilitates measurements of tube wall thickness.

From £343.94 £286.62

This 536 Series caliper can measure wall trhickness inside bores and recesses. Mitutoyo calipers are robust and of the highest quality....

  • Range: 0-150mm
  • Accuracy:±0.05mm.
  • Graduation: 0.05mm..
  • Made by Mitutoyo - Market leader in the engineering measuring tool sector.
  • Can measure wall thickness inside bores and recesses.

From £377.53 £314.61

This 536 Series caliper has thin blade-type jaws, which fit into very small grooves and make previously difficult outside measurements far easier to obtain. Outside measuring faces are carbide tipped ...

  • Range: up to 300mm.
  • Accuracy: up to ±0.08mm.
  • Graduation: 0.05mm.
  • Made by Mitutoyo - Market leader in the engineering measuring tool sector.
  • The thin blade-type jaws fit into very small grooves and make previously difficult outside measurements far easier to obtain.
  • The outside measuring faces are carbide tipped.
  • Can measure outside and inside dimensions, depth, and steps.

From £389.74 £324.78

This 536 Series caliper is specially designed for hole centre-to-centre measurements on the same, or offset, planes. Direct reading of pitch measurements is available due to the offset-value setting f...

  • Range: up to 300mm.
  • Graduation: 0.01mm (.0005").
  • Made by Mitutoyo - Market leader in the engineering measuring tool sector.
  • Specially designed for hole Centre-to-Centre measurements on the same, or offset, planes.
  • Direct reading of pitch measurements is available due to the offset-value setting function.

From £340.90 £284.08

This 536 Series caliper has a beam-mounted jaw which can be adjusted to facilitate measurement of stepped sections and hard-to-get at workpiece features. Mitutoyo calipers are robust and of the highes...

  • Range: up to 300mm.
  • Resolution: 0.05mm.
  • Made by Mitutoyo - Market leader in the engineering measuring tool sector.
  • The beam-mounted jaw can be adjusted to facilitate measurement of stepped sections and hard-to-get at workpiece features.

From £251.35 £209.46

This 534 Series caliper has long jaws for measuring hard-to-reach workpiece features. Measurements can be read directly from the upper and lower vernier scales. Mitutoyo calipers are robust and of the...

  • Range: up to 1000mm/40".
  • Graduation: 0.02mm/0.001".
  • Made by Mitutoyo - Market leader in the engineering measuring tool sector.
  • Long jaws for measuring hard-to-reach workpiece features.
  • Inside and outside measurements can be read directly from the upper and lower vernier scales.
  • The jaws have radiused measuring faces for accurate inside diameter (ID) measurement.

From £309.35 £257.79

The 532 Series Vernier Thumbwheel Caliper has a fine-adjustment thumbwheel that aids slider positioning and can be used to measure outside and inside dimensions, depth and steps....

  • Range: up to 280mm.
  • Made by Mitutoyo - Market leader in the engineering measuring tool sector.
  • Fine-adjustment thumbwheel aids slider positioning.
  • Can measure outside and inside dimensions, depth, and steps.

From £84.66 £70.55

The 531 Series Vernier Thumb Caliper has a slider that moves only when the spring-loaded thumb clamp is depressed. It can be used to measure outside and inside dimensions, depth and steps....

  • Range: up to 300mm / 12".
  • Made by Mitutoyo - Market leader in the engineering measuring tool sector.
  • The slider moves only when the spring-loaded thumb clamp is depressed.
  • Can measure outside and inside dimensions, depth, and steps.

From £57.49 £47.91

This 160 Series caliper has jaws which have radiused measuring faces for accurate inside diameter measurement. Measurements can be read directly from the upper and lower vernier scales. Mitutoyo calip...

  • Range: up to 2000mm / 80".
  • Made by Mitutoyo - Market leader in the engineering measuring tool sector.
  • Inside and outside measurements can be read directly from the upper and lower vernier scales.
  • The jaws have radiused measuring faces for accurate inside diameter (ID) measurement.

From £345.98 £288.32

The Insize 1236 caliper is made from stainless steel with a chrome finish for longer tool life and durability from machine shop wear, with both inside and longer outside jaws for more problematic meas...

  • Fine adjustment.
  • Made of stainless steel.
  • Satin chrome plated reading surface.

From £412.38 £343.65

The Insize 1233 caliper is made from stainless steel with a chrome finish for longer tool life and durability from machine shop wear, with both inside and outside measuring jaws. Comes with thumb roll...

  • Graduation: 0.02mm/0.001”.
  • With fine adjustment.
  • Meet DIN862.
  • Made of stainless steel.
  • Satin chrome plated reading surface.

From £55.63 £46.36

The Insize 1217 caliper is made from stainless steel with a chrome finish for longer tool life and durability from machine shop wear, with longer inside and outside measuring jaws. Comes with thumb ro...

  • Graduation: 0.02mm.
  • With fine adjustment.
  • Made of stainless steel.
  • Satin chrome plated reading surface.

From £114.66 £95.55

The Insize 1215 caliper is made from stainless steel with a chrome finish for longer tool life and durability from machine shop wear, with long stepped jaws (upto 300mm) for inside and outside measure...

  • With fine adjustment.
  • Made of stainless steel.
  • Satin chrome plated reading surface.

From £228.44 £190.37

The Insize 1214 caliper is made from stainless steel with a chrome finish for longer tool life and durability from machine shop wear, with longer stepped jaws (upto 200mm) for inside and outside measu...

  • Graduation 0.02mm/0.001".
  • Fine adjustment.
  • Made of stainless steel.
  • Satin chrome plated reading surface.

From £212.12 £176.77

Vernier calipers from Insize and Mitutoyo. Different sizes available including mini and long jaw calipers and for both inside and outside measurements.