Digital Indicators (Standard)

• Resolution 0.01mm/0.0005".
• Buttons: on/off, mm/inch, zero.
• CR2032 battery, auto power off.
• Data output.
• Flat back.
• Optional accessory: dat output cable (code 7302-SPC3A), contact points.

• Resolution 0.01mm/0.0005".
• Buttons: on/off, mm/inch, zero, ABS/INC.
• Keeps preset data and tolerance data in memory after restart.
• CR1632 battery, auto power off.
• Data output.
• Flat back.
• Optional accessory: dat output cable (code 7302-SPC3A), contact points.

• Resolution 0.001mm/0.00005".
• Reading in digital and analog
• Measurement range upto 50.8mm/2".
• Buttons: tolerance Go/No-Go display, data preset, measuring direction change, mm/inch, zero, ABS/INC.
• Keeps preset data and tolerance data in memory after restart.
• CR2032 battery, auto power off.
• Data output.
• Lug back.
• Optional accessory: dat output cable (code 7302-SPC3A), contact points.

• Resolution 0.01mm/0.0005".
• Reading in digital and analog
• Measurement range upto 50.8mm/2".
• Buttons: tolerance Go/No-Go display, data preset, measuring direction change, mm/inch, zero, ABS/INC.
• Keeps preset data and tolerance data in memory after restart.
• CR2032 battery, auto power off.
• Data output.
• Lug back.
• Optional accessory: dat output cable (code 7302-SPC3A), contact points.

• IP65 Dust/waterproof.
• Resolution 0.001mm/0.00005".
• Measurement range upto 50.8mm/2".
• Buttons: on/off, mm/inch, zero.
• CR2032 battery, auto power off.
• Data output.
• Lug back.
• Optional accessory: dat output cable (code 7302-SPC3A), contact points.

• Low power consumption (4000 working hours).
• Buttons: on/off, mm/inch, zero.
• Keeps preset data and tolerance data in memory after restart.
• CR2032 battery, auto power off.
• Data output.
• Lug back.
• Optional accessory: dat output cable (code 7302-SPC3A), contact points.

• Specially designed for bore gauges.
• Minimum value tracking function can find diameter automatically.
• Resolution 0.002mm/0.0001".
• Reading in digital and analog.
• Buttons: on/off, minimum value tracking, data preset, mm/inch, zero.
• Display can be rotated 320°.
• Keeps preset data and tolerance data in memory after restart.
• CR2032 battery, auto power off.
• Data output.
• Optional accessory: dat output cable (code 7302-SPC3A), contact points.

• Measurement range upto 100mm/4".
• Buttons: on/off, mm/inch, zero.
• CR2032 battery, auto power off.
• Data output.
• Lug back.
• Optional accessory: dat output cable (code 7302-SPC3A), contact points.

• Reading in digital and analog.
• Display can rotate 320°.
• Measurement range upto 50.8mm/2".
• Buttons: tolerance Go/No-Go display, data preset, measuring direction change, mm/inch, zero, ABS/INC.
• Keeps preset data and tolerance data in memory after restart.
• CR2032 battery, auto power off.
• Data output.
• Optional accessory: dat output cable (code 7302-SPC3A), contact points.

• Range: .5" / 12.7mm or .2" / 5mm.
• Resolution: .00005" / 0.001mm or .0005" / 0.01mm.
• Slim or back plunger type.
• Made by Mitutoyo- Market leader in the engineering measuring tool sector.
• Our unique ABSOLUTE sensor restores the last origin position automatically when the indicator is turned on.
• Rated to IP66: can be used satisfactorily even in adverse environments where the indicator is subject to splashing by cutting fluid or coolant.
• Slim body design body width: only 35 mm) is advantageous in multipoint measurement situations where space is restricted.
• Succeeded in digitalization of the Back Plunger type popular in dial indicators. A 5mm stroke plunger with a higher degree of accuracy has been implemented by adopting a direct reading scale for plunger displacement.
• The chance of overspeed errors has been eliminated thanks to the ABSOLUTE sensor.
• Built-in tolerance judgement function provides OK, +NG, or –NG judgement of measurement with respect to the preset upper and lower limit values, indicating the status of a measurement with the appropriate symbol. The symbols can be displayed much larger.
• Equipped with a data output port that enables incorporation into measurement networking and statistical process control systems.
• There is a choice of convenient Interface Input Tools which enable the conversion of measurement data to keyboard signals and direct input to cells in off-the-shelf spreadsheet software such as Excel. 

• Range: 1.2" / 30.4mm or 2.4" / 60.9mm.
• Accuracy: .00006 / 0.0015mm or .001" / 0.0025mm
• 2.0N or 2.5N maximum measuring force.
• Made by Mitutoyo- Market leader in the engineering measuring tool sector.
• This new-generation digital indicator offers the excellent accuracy and functionality expected from the top class of indicator.
• Take advantage of its high accuracy backed up by 0.5 μm / .00002" resolution, remote control functionality via a handheld controller or an RS-232C interface) and easy runout measurements with the well-established analogue bar display.
• Functionality meets the needs of diverse measurement applications.
• Measuring maximum value, minimum value and runout difference between a maximum and a minimum value).
• GO/NG judgement function: If a judgement result shows an out of tolerance condition the display backlighting changes from green to red.
• With the optional remote controller, operations such as zero-setting and presetting can be made without touching the indicator body, thereby avoiding disturbance to the set-up.
• An advanced, remote control system can be implemented with the built-in RS-232 interface and a PC.
• Equipped with a data output port that enables incorporation into measurement networking and statistical process control systems. 

• Range: .5" / 12.7mm, 1" / 25.4mm or 2" / 50.8mm.
• Repeatability: .001" / 0.0025mm or .005" / 0.02mm.
• Measuring forces up to 2.3N 543-491B only).
• Made by Mitutoyo- Market leader in the engineering measuring tool sector.
• Employing the ABSOLUTE Linear Encoder, the ID-CX indicator always displays the absolute position of the plunger from the origin at power-on.
• Thanks to the ABSOLUTE Linear Encoder, reliability has been increased due to elimination of over-speed errors.
• Tolerance-judging measurement is available by setting upper and lower limit values. The tolerance judgement result can be enlarged.
• Equipped with a data output port that enables incorporation into measurement networking and statistical process control systems.

• Range: .5" / 12.7mm
• Accuracy: .00012" / 0.003mm
• Measuring Force: 1.5N.
• Made by Mitutoyo- Market leader in the engineering measuring tool sector.
• This indicator incorporates an internal calculation function that operates from plunger displacement.
• Using dedicated fixtures, measurements of outside and inside diameter and radius of curvature can easily be made without needing to use conversion tables or manual calculations, and requiring access to only one side of the component to be measured.
• The ABSOLUTE sensor restores the last origin position automatically when the indicator is turned on.
• The chance of over-speed error has been avoided thanks to the ABSOLUTE sensor.
• Tolerance judgement is available by presetting upper and lower limit values.
• Large, easy-to-read LCD 7-digit readout with a character height of 8 mm. Can be rotated up to 330 degrees to achieve the optimum reading position.
• Equipped with a data output port that enables incorporation into measurement networking and statistical process control systems.

• Range: .5" / 12.7mm
• Accuracy: .00012" / 0.003mm
• Measuring Force: 1.5N or less.
• Made by Mitutoyo- Market leader in the engineering measuring tool sector.
• Exclusively designed for Bore Gauges: this ID-C series indicator has the minimum value holding and GO/NG judgement functions.
• Employing an ABSOLUTE Linear Encoder, the Bore Gauge ID-C always displays the absolute position of the plunger from the origin at power-on. Also, the reliability has been increased due to elimination of over-speed errors.
• An analogue bar indication is integrated to provide the advantages of analogue display for minimum value measurements.
• Up to three sets of reference diameter and upper/lower tolerance values can be stored to simplify the start-up key operation in repetitive hole inspection of mixed-diameter holes.
• Equipped with a data output port that enables incorporation into measurement networking and statistical process control systems.

• Range: 1" / 25.4mm.
• Resolution: .0005" / 0.01 mm Accuracy: .0008" / 0.002mm.
• Measuring Force: 1.8N or less.
• Made by Mitutoyo- Market leader in the engineering measuring tool sector.
• General purpose indicator with the measuring range of 25.4 mm / 1".
• Cost-effective and user-friendly type which is equipped with the basic functions necessary.
• The ABSOLUTE sensor restores the last origin position automatically when the indicator is turned on, and realizes high reliability by eliminating over-speed errors.
• Battery life of 20,000 hours in continuous use has been achieved.
• Easy-to-read large LCD readout with a character height of 8 mm.
• Equipped with a data output port that enables incorporation into measurement networking and statistical process control systems

&nb

• Reading in digital and analogue.
• Display can be rotated by 320°.
• Button function: tolerance Go and No-Go display, data preset, measuring direction change, max./min./TIR measurement.
• Keep preset data and tolerance data in memory after restart.
• CR2032 battery, automatic power off.
• Data output.

• Direct Inch/Metric conversion
• 58mm dial face
• Lugback and 8mm stem mountings
• Resolution: 0.01mm/0.0005"
• Absolute/Incramenal reading
• Floating Zero
• Also supplied with flatback