Free Next Day Delivery
on orders over £39 ex vat*

Expert Technical Team
Get advice on 01924 869 615

Same Day Despatch
On orders placed up to 6pm

Pro-L Mill Milling Bodies

Pro-L Mill Milling Bodies

The No. 1 milling system for the machining of high quality workpieces. Special 90° indexable milling system for aluminium, stainless steel and titanium milling with depths of cut up to 96mm.

Filter By

12 Items

Sort By
Sku 1-06-043930

The PALS-HM series Pro-L mill porcupine end mill from Korloy can perform up to 93mm depth of cut on Stainless Steel, HRSA's and Non-Ferrous materials. These can perform face milling, shoulder milling,...

  • The number 1 milling system for machining high quality workpieces
  • Ultra strong & accurate clamping with 2 screws per insert
  • High precision insert geometry dedicated to each holder diameter
  • Up to 93mm depth of cut
  • Corner radius inserts from 0.4-1.6mm
  • Perfect perpendicularity
  • Through coolant holders
  • Low cutting load & resistance
  • Supreme surface roughness
  • Perfect insert alignment ensures no marking of workpiece where inserts cross over
5 days*
£863.12 £719.27

*Estimated lead time, subject to availability

Sku 1-06-043917

The PALS series Pro-L mill end mill from Korloy can perform up to 25mm depth of cut on Stainless Steel, HRSA's and Non-Ferrous materials. The diameters range from 32-63mm and can perform face milling,...

  • The number 1 milling system for machining high quality workpieces
  • Ultra strong & accurate clamping with 2 screws per insert
  • High precision insert geometry dedicated to each holder diameter
  • Up to 25mm depth of cut
  • Corner radius inserts from 0.4-1.6mm
  • Perfect perpendicularity
  • Through coolant holders
  • Low cutting load & resistance
  • Supreme surface roughness
5 days*
£289.03 £240.86

*Estimated lead time, subject to availability

Sku 1-06-043918

The PALS series Pro-L mill end mill from Korloy can perform up to 25mm depth of cut on Stainless Steel, HRSA's and Non-Ferrous materials. The diameters range from 32-63mm and can perform face milling,...

  • The number 1 milling system for machining high quality workpieces
  • Ultra strong & accurate clamping with 2 screws per insert
  • High precision insert geometry dedicated to each holder diameter
  • Up to 25mm depth of cut
  • Corner radius inserts from 0.4-1.6mm
  • Perfect perpendicularity
  • Through coolant holders
  • Low cutting load & resistance
  • Supreme surface roughness
5 days*
£289.03 £240.86

*Estimated lead time, subject to availability

Sku 1-06-043920

The PALS series Pro-L mill end mill from Korloy can perform up to 25mm depth of cut on Stainless Steel, HRSA's and Non-Ferrous materials. The diameters range from 32-63mm and can perform face milling,...

  • The number 1 milling system for machining high quality workpieces
  • Ultra strong & accurate clamping with 2 screws per insert
  • High precision insert geometry dedicated to each holder diameter
  • Up to 25mm depth of cut
  • Corner radius inserts from 0.4-1.6mm
  • Perfect perpendicularity
  • Through coolant holders
  • Low cutting load & resistance
  • Supreme surface roughness
In stock
£303.65 £253.04
Sku 1-06-043921

The PALS series Pro-L mill end mill from Korloy can perform up to 25mm depth of cut on Stainless Steel, HRSA's and Non-Ferrous materials. The diameters range from 32-63mm and can perform face milling,...

  • The number 1 milling system for machining high quality workpieces
  • Ultra strong & accurate clamping with 2 screws per insert
  • High precision insert geometry dedicated to each holder diameter
  • Up to 25mm depth of cut
  • Corner radius inserts from 0.4-1.6mm
  • Perfect perpendicularity
  • Through coolant holders
  • Low cutting load & resistance
  • Supreme surface roughness
In stock
£303.65 £253.04
Sku 1-06-043947

The PALS series Pro-L mill end mill from Korloy can perform up to 25mm depth of cut on Stainless Steel, HRSA's and Non-Ferrous materials. The diameters range from 32-63mm and can perform face milling,...

  • The number 1 milling system for machining high quality workpieces
  • Ultra strong & accurate clamping with 2 screws per insert
  • High precision insert geometry dedicated to each holder diameter
  • Up to 25mm depth of cut
  • Corner radius inserts from 0.4-1.6mm
  • Perfect perpendicularity
  • Through coolant holders
  • Low cutting load & resistance
  • Supreme surface roughness
5 days*
£327.92 £273.27

*Estimated lead time, subject to availability

Sku 1-06-043948

The PALS series Pro-L mill end mill from Korloy can perform up to 25mm depth of cut on Stainless Steel, HRSA's and Non-Ferrous materials. The diameters range from 32-63mm and can perform face milling,...

  • The number 1 milling system for machining high quality workpieces
  • Ultra strong & accurate clamping with 2 screws per insert
  • High precision insert geometry dedicated to each holder diameter
  • Up to 25mm depth of cut
  • Corner radius inserts from 0.4-1.6mm
  • Perfect perpendicularity
  • Through coolant holders
  • Low cutting load & resistance
  • Supreme surface roughness
5 days*
£327.92 £273.27

*Estimated lead time, subject to availability

Sku 1-06-043923

The PALS series Pro-L mill end mill from Korloy can perform up to 25mm depth of cut on Stainless Steel, HRSA's and Non-Ferrous materials. The diameters range from 32-63mm and can perform face milling,...

  • The number 1 milling system for machining high quality workpieces
  • Ultra strong & accurate clamping with 2 screws per insert
  • High precision insert geometry dedicated to each holder diameter
  • Up to 25mm depth of cut
  • Corner radius inserts from 0.4-1.6mm
  • Perfect perpendicularity
  • Through coolant holders
  • Low cutting load & resistance
  • Supreme surface roughness
5 days*
£348.82 £290.68

*Estimated lead time, subject to availability

Sku 1-06-043924

The PALS series Pro-L mill end mill from Korloy can perform up to 25mm depth of cut on Stainless Steel, HRSA's and Non-Ferrous materials. The diameters range from 32-63mm and can perform face milling,...

  • The number 1 milling system for machining high quality workpieces
  • Ultra strong & accurate clamping with 2 screws per insert
  • High precision insert geometry dedicated to each holder diameter
  • Up to 25mm depth of cut
  • Corner radius inserts from 0.4-1.6mm
  • Perfect perpendicularity
  • Through coolant holders
  • Low cutting load & resistance
  • Supreme surface roughness
5 days*
£348.82 £290.68

*Estimated lead time, subject to availability

Sku 1-06-043926

The PALS series Pro-L mill end mill from Korloy can perform up to 25mm depth of cut on Stainless Steel, HRSA's and Non-Ferrous materials. The diameters range from 32-63mm and can perform face milling,...

  • The number 1 milling system for machining high quality workpieces
  • Ultra strong & accurate clamping with 2 screws per insert
  • High precision insert geometry dedicated to each holder diameter
  • Up to 25mm depth of cut
  • Corner radius inserts from 0.4-1.6mm
  • Perfect perpendicularity
  • Through coolant holders
  • Low cutting load & resistance
  • Supreme surface roughness
5 days*
£500.23 £416.86

*Estimated lead time, subject to availability

Sku 1-06-043927

The PALS series Pro-L mill end mill from Korloy can perform up to 25mm depth of cut on Stainless Steel, HRSA's and Non-Ferrous materials. The diameters range from 32-63mm and can perform face milling,...

  • The number 1 milling system for machining high quality workpieces
  • Ultra strong & accurate clamping with 2 screws per insert
  • High precision insert geometry dedicated to each holder diameter
  • Up to 25mm depth of cut
  • Corner radius inserts from 0.4-1.6mm
  • Perfect perpendicularity
  • Through coolant holders
  • Low cutting load & resistance
  • Supreme surface roughness
5 days*
£500.23 £416.86

*Estimated lead time, subject to availability

Sku 1-06-045363

The PALCM series Pro-L mill face mill from Korloy can perform up to 34mm depth of cut on Stainless Steel, HRSA's and Non-Ferrous materials. This holder can perform face milling, shoulder milling, slot...

  • The number 1 milling system for machining high quality workpieces
  • Ultra strong & accurate clamping with 2 screws per insert
  • High precision insert geometry dedicated to each holder diameter
  • Up to 34mm depth of cut
  • Corner radius inserts from 0.4-1.6mm
  • Perfect perpendicularity
  • Through coolant holders
  • Low cutting load & resistance
  • Supreme surface roughness
5 days*
£453.49 £377.91

*Estimated lead time, subject to availability

Filter By

12 Items

Sort By