D-Power Milling Cutters - Full Range | Cutwel

2 Flute D-Power Diamond Coated Carbide Reduced Neck Slot Drill - EIB04 (YG-1)

The YG-1 EIB04 series D-Power diamond coated micrograin carbide cutters has 2 flutes and a plain shank. These slot drills have a reduced neck and range in diameter from 0.5mm-12mm. The D-Power range i...

First choice for high performance machining of graphite with extreme wear resistance.

Excellent performance in abrasive non-ferrous materials.

Diamond coating has high lubricity and low coefficient of friction, preventing the tool from fast wear common in abrasive material machining.

Suitable for high accuracy machining.

Smooth and excellent surface finish on graphite.

Also suitable for high speed machining of Wrought Aluminium, Bakelite, Plastics, Wood, Brass and non-ferrous metals.

Diameter (mm)	0.5 - 12
Overall Length (mm)	40 - 150
Flute Length (mm)	1 - 55
Shank (mm)	3 - 12

From £45.34 £37.78

View Products

2 Flute D-Power Diamond Coated Carbide Corner Radius Reduced Neck Slot Drill - EI996 (YG-1)

The YG-1 EI996 series D-Power diamond coated micrograin carbide cutters has 2 flutes and a plain shank. These slot drills have a reduced neck and corner radius for increased wear resistance. These ran...

First choice for high performance machining of graphite with extreme wear resistance.

Excellent performance in abrasive non-ferrous materials.

Diamond coating has high lubricity and low coefficient of friction, preventing the tool from fast wear common in abrasive material machining.

Reduced neck for deep pocket machining.

Suitable for high accuracy machining.

Smooth and excellent surface finish on graphite.

Also suitable for high speed machining of Wrought Aluminium, Bakelite, Plastics, Wood, Brass and non-ferrous metals.

Diameter (mm)	0.2 - 6
Overall Length (mm)	40 - 100
Flute Length (mm)	0.3 - 6
Shank (mm)	3 - 6

From £51.68 £43.07

View Products

2 Flute D-Power Diamond Coated Carbide Corner Radius Tapered Neck Slot Drill - EIB86 (YG-1)

The YG-1 EI996 series D-Power diamond coated micrograin carbide cutters has 2 flutes and a plain shank. These slot drills have a tapered neck and corner radius for increased wear resistance. These ran...

First choice for high performance machining of graphite with extreme wear resistance.

Excellent performance in abrasive non-ferrous materials.

Diamond coating has high lubricity and low coefficient of friction, preventing the tool from fast wear common in abrasive material machining.

Tapered Neck - radius tolerance ± 0.01mm

Suitable for high accuracy machining.

Smooth and excellent surface finish on graphite.

Also suitable for high speed machining of Wrought Aluminium, Bakelite, Plastics, Wood, Brass and non-ferrous metals.

Diameter (mm)	1 - 2
Overall Length (mm)	60 - 100
Flute Length (mm)	2 - 4
Shank (mm)	3 - 4

From £53.48 £44.57

View Products

2 Flute D-Power Diamond Coated Carbide Short Length Ball Nose Reduced Neck End Mill - EI880 (YG-1)

The YG-1 EI880 series D-Power diamond coated micrograin carbide cutters has 2 flutes and a plain shank. These short length end mills have a reduced neck and a ball nosed end for machining radii. These...

First choice for high performance machining of graphite with extreme wear resistance.

Excellent performance in abrasive non-ferrous materials.

Diamond coating has high lubricity and low coefficient of friction, preventing the tool from fast wear common in abrasive material machining.

Ball nosed gemoetry.

Reduced neck for deep pocket machining.

Suitable for high accuracy machining.

Smooth and excellent surface finish on graphite.

Also suitable for high speed machining of Wrought Aluminium, Bakelite, Plastics, Wood, Brass and non-ferrous metals.

Diameter (mm)	2 - 12
Overall Length (mm)	60 - 90
Flute Length (mm)	3 - 18
Shank (mm)	6 - 12

From £106.58 £88.82

View Products

3 Flute D-Power Diamond Coated Carbide Corner Radius 40 degree Helix Standard Length End Mill - EIA13 (YG-1)

The YG-1 EIA13 series D-Power diamond coated micrograin carbide cutters have 3 flutes and a plain shank. These end mills have a 40° helix and corner radius for increased wear resistance. These range ...

First choice for high performance machining of graphite with extreme wear resistance.

Excellent performance in abrasive non-ferrous materials.

Diamond coating has high lubricity and low coefficient of friction, preventing the tool from fast wear common in abrasive material machining.

Suitable for high accuracy machining.

Smooth and excellent surface finish on graphite.

Also suitable for high speed machining of Wrought Aluminium, Bakelite, Plastics, Wood, Brass and non-ferrous metals.

Diameter (mm)	2 - 12
Overall Length (mm)	40 - 75
Flute Length (mm)	6 - 25
Shank (mm)	3 - 12

From £44.18 £36.82

View Products

4 Flute D-Power Diamond Coated Carbide Corner Radius Reduced Neck End Mill - EIB88 (YG-1)

The YG-1 EIB88 series D-Power diamond coated micrograin carbide cutters has 4 flutes and a plain shank. These end mills have a reduced neck and corner radius for increased wear resistance. These range...

First choice for high performance machining of graphite with extreme wear resistance.

Excellent performance in abrasive non-ferrous materials.

Diamond coating has high lubricity and low coefficient of friction, preventing the tool from fast wear common in abrasive material machining.

Corner radius to protect cutting edge.

Reduced neck for deep pocket machining.

Suitable for high accuracy machining.

Smooth and excellent surface finish on graphite.

Also suitable for high speed machining of Wrought Aluminium, Bakelite, Plastics, Wood, Brass and non-ferrous metals.

Diameter (mm)	6 - 12
Overall Length (mm)	75 - 125
Flute Length (mm)	10 - 25
Shank (mm)	6 - 12

From £112.85 £94.04

View Products

3 Flute D-Power Diamond Coated Carbide Corner Radius 40 degree Helix Long Length End Mill - EIA14 (YG-1)

The YG-1 EIA14 series D-Power diamond coated micrograin carbide cutters have 3 flutes and a plain shank. These end mills have a 40° helix and corner radius for increased wear resistance. These range ...

First choice for high performance machining of graphite with extreme wear resistance.

Excellent performance in abrasive non-ferrous materials.

Diamond coating has high lubricity and low coefficient of friction, preventing the tool from fast wear common in abrasive material machining.

Suitable for high accuracy machining.

Smooth and excellent surface finish on graphite.

Also suitable for high speed machining of Wrought Aluminium, Bakelite, Plastics, Wood, Brass and non-ferrous metals.

Diameter (mm)	2 - 12
Overall Length (mm)	60 - 100
Flute Length (mm)	9 - 45
Shank (mm)	3 - 12

From £51.55 £42.96

View Products

2 Flute D-Power Diamond Coated Carbide Long Length Ball Nose Reduced Neck Slot Drill - EI451 (YG-1)

The YG-1 EI451 series D-Power diamond coated micrograin carbide cutters has 2 flutes and a plain shank. These long length slot drills have a reduced neck and a ball nosed end for machining radii. Thes...

First choice for high performance machining of graphite with extreme wear resistance.

Excellent performance in abrasive non-ferrous materials.

Diamond coating has high lubricity and low coefficient of friction, preventing the tool from fast wear common in abrasive material machining.

Long Length Ball Nosed geometry with radius tolerance ± 0.01mm

Suitable for high accuracy machining.

Smooth and excellent surface finish on graphite.

Also suitable for high speed machining of Wrought Aluminium, Bakelite, Plastics, Wood, Brass and non-ferrous metals.

Diameter (mm)	2 - 12
Overall Length (mm)	80 - 130
Flute Length (mm)	10 - 55
Shank (mm)	4 - 12

From £84.11 £70.09

View Products

2 Flute D-Power Diamond Coated Carbide Extra-Long Length Ball Nose Reduced Neck Slot Drill - EI450 (YG-1)

The YG-1 EI450 series D-Power diamond coated micrograin carbide cutters has 2 flutes and a plain shank. These long length slot drills have a reduced neck and a ball nosed end for machining radii. Thes...

First choice for high performance machining of graphite with extreme wear resistance.

Excellent performance in abrasive non-ferrous materials.

Diamond coating has high lubricity and low coefficient of friction, preventing the tool from fast wear common in abrasive material machining.

Long Length Ball Nosed geometry with radius tolerance ± 0.01mm

Suitable for high accuracy machining.

Smooth and excellent surface finish on graphite.

Also suitable for high speed machining of Wrought Aluminium, Bakelite, Plastics, Wood, Brass and non-ferrous metals.

Diameter (mm)	4 - 12
Overall Length (mm)	100 - 200
Flute Length (mm)	20 - 55
Shank (mm)	4 - 12

From £88.26 £73.55

View Products

2 Flute D-Power Diamond Coated Carbide Minature Ball Nose Reduced Neck Slot Drill - EI997 (YG-1)

The YG-1 EI997 series D-Power diamond coated micrograin carbide cutters has 2 flutes and a plain shank. These minature slot drills have a reduced neck and a ball nosed end for machining radii. These r...

First choice for high performance machining of graphite with extreme wear resistance.

Excellent performance in abrasive non-ferrous materials.

Diamond coating has high lubricity and low coefficient of friction, preventing the tool from fast wear common in abrasive material machining.

Long Length Minature Ball Nosed geometry with radius tolerance ± 0.01mm

Suitable for high accuracy machining.

Smooth and excellent surface finish on graphite.

Also suitable for high speed machining of Wrought Aluminium, Bakelite, Plastics, Wood, Brass and non-ferrous metals.

Diameter (mm)	0.2 - 6
Overall Length (mm)	40 - 100
Flute Length (mm)	0.2 - 6
Shank (mm)	3 - 6

From £57.82 £48.18

View Products

2 Flute D-Power Diamond Coated Carbide Minature Ball Nose Reduced Neck Slot Drill - EIB93 (YG-1)

The YG-1 EIB93 series D-Power diamond coated micrograin carbide cutters has 2 flutes and a plain shank. These minature slot drills have a reduced neck and a ball nosed end for machining radii. These r...

First choice for high performance machining of graphite with extreme wear resistance.

Excellent performance in abrasive non-ferrous materials.

Diamond coating has high lubricity and low coefficient of friction, preventing the tool from fast wear common in abrasive material machining.

Long Length Minature Ball Nosed geometry with radius tolerance ± 0.01mm

Suitable for high accuracy machining.

Smooth and excellent surface finish on graphite.

Also suitable for high speed machining of Wrought Aluminium, Bakelite, Plastics, Wood, Brass and non-ferrous metals.

Diameter (mm)	0.4 - 4
Overall Length (mm)	45 - 60
Flute Length (mm)	0.6 - 6
Shank (mm)	4 - 4

From £65.66 £54.72

View Products

2 Flute D-Power Diamond Coated Carbide Ball Nose Tapered Neck Slot Drill - EIB87 (YG-1)

The YG-1 EIB87 series D-Power diamond coated micrograin carbide cutters has 2 flutes and a plain shank. These minature slot drills have a reduced neck and a ball nosed end for machining radii. These r...

First choice for high performance machining of graphite with extreme wear resistance.

Excellent performance in abrasive non-ferrous materials.

Diamond coating has high lubricity and low coefficient of friction, preventing the tool from fast wear common in abrasive material machining.

Ball Nosed Geometry - radius tolerance ± 0.01mm.

Tapered neck.

Suitable for high accuracy machining.

Smooth and excellent surface finish on graphite.

Also suitable for high speed machining of Wrought Aluminium, Bakelite, Plastics, Wood, Brass and non-ferrous metals.

Diameter (mm)	1 - 2
Overall Length (mm)	40 - 100
Flute Length (mm)	2 - 4
Shank (mm)	3 - 4

From £51.83 £43.19

View Products

3 Flute D-Power Diamond Coated Carbide Ball Nose Reduced Neck End Mill - EI881 (YG-1)

The YG-1 EIB87 series D-Power diamond coated micrograin carbide cutters has 2 flutes and a plain shank. These minature slot drills have a reduced neck and a ball nosed end for machining radii. These r...

First choice for high performance machining of graphite with extreme wear resistance.

Excellent performance in abrasive non-ferrous materials.

Diamond coating has high lubricity and low coefficient of friction, preventing the tool from fast wear common in abrasive material machining.

Ball Nosed Geometry - radius tolerance ± 0.01mm.

Reduced neck for deep pocket machining.

Suitable for high accuracy machining.

Smooth and excellent surface finish on graphite.

Also suitable for high speed machining of Wrought Aluminium, Bakelite, Plastics, Wood, Brass and non-ferrous metals.

Diameter (mm)	2 - 12
Overall Length (mm)	60 - 90
Flute Length (mm)	3 - 18
Shank (mm)	6 - 12

From £105.58 £87.98

View Products

There are no products in your shopping basket.

Your Basket Summary

Suggestions

Products

Categories

D-Power Milling Cutters - Full Range

Cutwel