3 Flute (Chamfer Prep) General Carbide Milling Cutters

3 Flute K2 Coated Carbide Chamfer Prep Throw-Away Slot Drill - G9G46 Series (YG-1)

The G9G46 series K2 coated carbide milling cutters feature 3 flutes making them suitable for slotting & profiling applications. K2 carbide range from global market leaders YG-1 are the number 1 best s...

3 flutes for slotting & profiling applications
Special K2 coating for longer tool life, high heat and wear resistance
Dry cutting on steel can increase tool life up to 40%
Also suitable for general milling of steel, stainless steel, cast iron & non-ferrous
Consistent and reliable performance in general machining conditions
Made from high-quality micrograin carbide.
Manufactured by global market leader YG-1

Diameter (mm)	3 - 20
Overall Length (mm)	36 - 75
Flute Length (mm)	5 - 22
Shank (mm)	6 - 20

From £15.65 £13.04

View Products

3 Flute K2 Coated Carbide Chamfer Prep Short Length Slot Drill - G9G47 Series (YG-1)

The G9G47 series K2 coated carbide milling cutters feature a chamfer prep for additional cutting edge protection. K2 carbide range from global market leaders YG-1 are the number 1 best selling tool fo...

Chamfer prep for additional cutting edge protection
Special K2 coating for longer tool life, high heat and wear resistance
Dry cutting on steel can increase tool life up to 40%
Also suitable for general milling of steel, stainless steel, cast iron & non-ferrous
Consistent and reliable performance in general machining conditions
Made from high-quality micrograin carbide.
Manufactured by global market leader YG-1

Diameter (mm)	3 - 20
Overall Length (mm)	32 - 100
Flute Length (mm)	12 - 32
Shank (mm)	3 - 20

From £11.30 £9.42

View Products

3 Flute K2 Coated Carbide 45 degree Helix Chamfer Prep Slot Drill - G9G49 Series (YG-1)

The G9G47 series K2 coated carbide milling cutters feature a 45° helix for improved chip evacuation & surface finish. K2 carbide range from global market leaders YG-1 are the number 1 best selling to...

45 degree helix for improved chip evacuation & surface finish
Special K2 coating for longer tool life, high heat and wear resistance
Dry cutting on steel can increase tool life up to 40%
Also suitable for general milling of steel, stainless steel, cast iron & non-ferrous
Consistent and reliable performance in general machining conditions
Made from high-quality micrograin carbide.
Manufactured by global market leader YG-1

Diameter (mm)	3 - 20
Overall Length (mm)	57 - 104
Flute Length (mm)	7 - 32
Shank (mm)	6 - 20

From £28.08 £23.40

View Products

There are no products in your shopping basket.

Your Basket Summary

Suggestions

Products

Categories

3 Flute (Chamfer Prep) General Purpose Carbide Milling Cutters

Cutwel