K2 Coated Carbide Milling Cutters

4 Flute K2 Coated Carbide End Mill - G9432 Series (YG-1)

The G9432 series K2 coated carbide milling cutters feature 4 flutes making them suitable for profiling applications. K2 carbide range from global market leaders YG-1 are the number 1 best selling tool...

4 flutes for profiling applications
Special K2 coating for longer tool life, high heat and wear resistance
Dry cutting on steel can increase tool life up to 40%
Also suitable for general milling of steel, stainless steel, cast iron & non-ferrous
Consistent and reliable performance in general machining conditions
Made from high-quality micrograin carbide.
Manufactured by global market leader YG-1

Diameter (mm)	1 - 20
Overall Length (mm)	32 - 100
Flute Length (mm)	3 - 32
Shank (mm)	2 - 20

From £11.30 £9.42

View Products

3-5 Flute K2 Coated Carbide Coarse Pitch Chamfer Prep Weldon Shank Ripper - G9A42 Series (YG-1)

The G9A42 series K2 coated carbide milling cutters feature a ripper geometry for high metal removal rates and a chamfer prep for additional cutting edge protection. K2 carbide range from global market...

Ripper helix profile for high metal removal rates
Chamfer prep for additional cutting edge protection
Special K2 coating for longer tool life, high heat and wear resistance
Dry cutting on steel can increase tool life up to 40%
Also suitable for general milling of steel, stainless steel, cast iron & non-ferrous
Consistent and reliable performance in general machining conditions
Made from high-quality micrograin carbide.
Manufactured by global market leader YG-1

Diameter (mm)	6 - 25
Overall Length (mm)	57 - 121
Flute Length (mm)	16 - 45
Shank (mm)	6 - 25

From £27.06 £22.55

View Products

2 Flute K2 Coated Carbide Short Length Slot Drill - G9424 Series (YG-1)

The G9424 series K2 coated carbide milling cutters feature 2 flutes making them suitable for slotting applications. K2 carbide range from global market leaders YG-1 are the number 1 best selling tool ...

2 flutes for slotting applications
Special K2 coating for longer tool life, high heat and wear resistance
Dry cutting on steel can increase tool life up to 40%
Also suitable for general milling of steel, stainless steel, cast iron & non-ferrous
Consistent and reliable performance in general machining conditions
Made from high-quality micrograin carbide.
Manufactured by global market leader YG-1

Diameter (mm)	1 - 20
Overall Length (mm)	32 - 100
Flute Length (mm)	3 - 32
Shank (mm)	2 - 20

From £11.30 £9.42

View Products

2 Flute K2 Coated Carbide Extra Long Length Slot Drill - G9452 Series (YG-1)

The G9452 series K2 coated carbide milling cutters feature 2 flutes making them suitable for slotting applications. K2 carbide range from global market leaders YG-1 are the number 1 best selling tool ...

2 flutes for slotting applications
Special K2 coating for longer tool life, high heat and wear resistance
Dry cutting on steel can increase tool life up to 40%
Also suitable for general milling of steel, stainless steel, cast iron & non-ferrous
Consistent and reliable performance in general machining conditions
Made from high-quality micrograin carbide.
Manufactured by global market leader YG-1

Diameter (mm)	3 - 20
Overall Length (mm)	60 - 100
Flute Length (mm)	20 - 45
Shank (mm)	3 - 20

From £20.58 £17.15

View Products

3 Flute K2 Coated Carbide Short Length Slot Drill - G9425 Series (YG-1)

The G9435 series K2 coated carbide milling cutters feature 3 flutes making them suitable for slotting & profiling applications. K2 carbide range from global market leaders YG-1 are the number 1 best s...

3 flutes for slotting & profiling applications
Special K2 coating for longer tool life, high heat and wear resistance
Dry cutting on steel can increase tool life up to 40%
Also suitable for general milling of steel, stainless steel, cast iron & non-ferrous
Consistent and reliable performance in general machining conditions
Made from high-quality micrograin carbide.
Manufactured by global market leader YG-1

Diameter (mm)	1 - 20
Overall Length (mm)	32 - 100
Flute Length (mm)	3 - 32
Shank (mm)	2 - 20

From £11.30 £9.42

View Products

4 Flute K2 Coated Carbide Long Length End Mill - G9449 Series (YG-1)

The G9449 series K2 coated carbide milling cutters feature 4 flutes making them suitable for profiling applications. K2 carbide range from global market leaders YG-1 are the number 1 best selling tool...

4 flutes for profiling applications
Special K2 coating for longer tool life, high heat and wear resistance
Dry cutting on steel can increase tool life up to 40%
Also suitable for general milling of steel, stainless steel, cast iron & non-ferrous
Consistent and reliable performance in general machining conditions
Made from high-quality micrograin carbide.
Manufactured by global market leader YG-1

Diameter (mm)	2 - 20
Overall Length (mm)	38 - 104
Flute Length (mm)	7 - 38
Shank (mm)	3 - 20

From £14.14 £11.78

View Products

4 Flute K2 Coated Carbide Chamfer Prep Long Length End Mill - G9G51 Series (YG-1)

The G9G51 series K2 coated carbide milling cutters feature a chamfer prep for additional cutting edge protection. K2 carbide range from global market leaders YG-1 are the number 1 best selling tool fo...

Chamfer prep for additional cutting edge protection
Special K2 coating for longer tool life, high heat and wear resistance
Dry cutting on steel can increase tool life up to 40%
Also suitable for general milling of steel, stainless steel, cast iron & non-ferrous
Consistent and reliable performance in general machining conditions
Made from high-quality micrograin carbide.
Manufactured by global market leader YG-1

Diameter (mm)	3 - 20
Overall Length (mm)	57 - 104
Flute Length (mm)	8 - 38
Shank (mm)	6 - 20

From £24.43 £20.36

View Products

4 Flute K2 Coated Carbide Extra Long Length End Mill - G9453 Series (YG-1)

The G9453 series K2 coated carbide milling cutters feature 4 flutes making them suitable for profiling applications. K2 carbide range from global market leaders YG-1 are the number 1 best selling tool...

4 flutes for profiling applications
Special K2 coating for longer tool life, high heat and wear resistance
Dry cutting on steel can increase tool life up to 40%
Also suitable for general milling of steel, stainless steel, cast iron & non-ferrous
Consistent and reliable performance in general machining conditions
Made from high-quality micrograin carbide.
Manufactured by global market leader YG-1

Diameter (mm)	3 - 20
Overall Length (mm)	60 - 100
Flute Length (mm)	20 - 45
Shank (mm)	3 - 20

From £20.58 £17.15

View Products

4 Flute K2 Coated Carbide 45 degree Helix End Mill - G9F45 Series (YG-1)

The G9F45 series K2 coated carbide milling cutters feature 45� helix for improved chip evacuation & surface finish. K2 carbide range from global market leaders YG-1 are the number 1 best selling too...

45 degree helix for improved chip evacuation & surface finish
Special K2 coating for longer tool life, high heat and wear resistance
Dry cutting on steel can increase tool life up to 40%
Suitable for general milling of steel and cast iron
Consistent and reliable performance in general machining conditions
Made from high-quality micrograin carbide
Manufactured by global market leader YG-1

Diameter (mm)	3 - 20
Overall Length (mm)	50 - 150
Flute Length (mm)	6 - 75
Shank (mm)	4 - 20

From £16.51 £13.76

View Products

2 Flute K2 Coated Carbide Corner Radius Long Length End Mill - G9B83 Series (YG-1)

The G9B83 series K2 coated carbide milling cutters feature a corner radius for reduced cutting forces and improved tool life. K2 carbide range from global market leaders YG-1 are the number 1 best sel...

Corner radius for reduced cutting forces and improved tool life
Special K2 coating for longer tool life, high heat and wear resistance
Dry cutting on steel can increase tool life up to 40%
Also suitable for general milling of steel, stainless steel, cast iron & non-ferrous
Consistent and reliable performance in general machining conditions
Made from high-quality micrograin carbide.
Manufactured by global market leader YG-1

Diameter (mm)	3 - 12
Overall Length (mm)	75 - 100
Flute Length (mm)	6 - 24
Shank (mm)	4 - 12

From £16.34 £13.62

View Products

2 Flute K2 Coated Carbide Ball Nose Short Length Slot Drill - G9624 Series (YG-1)

The G9624 series K2 coated carbide milling cutters feature a ball nose for copy milling, full radius grooving & corner radius milling. K2 carbide range from global market leaders YG-1 are the number 1...

Ball nose for copy milling, full radius grooving & corner radius milling
Special K2 coating for longer tool life, high heat and wear resistance
Dry cutting on steel can increase tool life up to 40%
Also suitable for general milling of steel, stainless steel, cast iron & non-ferrous
Consistent and reliable performance in general machining conditions
Made from high-quality micrograin carbide.
Manufactured by global market leader YG-1

Diameter (mm)	2 - 20
Overall Length (mm)	48 - 82
Flute Length (mm)	4 - 20
Shank (mm)	6 - 20

From £15.14 £12.62

View Products

4 Flute K2 Coated Carbide Ball Nose Short Length End Mill - G9634 Series (YG-1)

The G9634 series K2 coated carbide milling cutters feature a ball nose for copy milling, full radius grooving & corner radius milling. K2 carbide range from global market leaders YG-1 are the number 1...

Ball nose for copy milling, full radius grooving & corner radius milling
Special K2 coating for longer tool life, high heat and wear resistance
Dry cutting on steel can increase tool life up to 40%
Also suitable for general milling of steel, stainless steel, cast iron & non-ferrous
Consistent and reliable performance in general machining conditions
Made from high-quality micrograin carbide.
Manufactured by global market leader YG-1

Diameter (mm)	2 - 20
Overall Length (mm)	48 - 82
Flute Length (mm)	4 - 20
Shank (mm)	6 - 20

From £15.14 £12.62

View Products

4 Flute Multiple Helix K2 Coated Carbide Chamfer Prep Weldon Shank End Mill - G9H74/G9H76 Series (YG-1)

The G9H74/G9H76 series K2 coated carbide milling cutters feature a multiple helix design for twice the tool life compared to conventional general purpose carbide milling cutters. Achieve higher produc...

Multiple helix for double the tool life compared to conventional general purpose carbide
Slot & end mill with the same tool for improved productivity
Unequal helix for vibration free milling, even in larger cut depths up to 0.8xD when slotting & 0.3xD when side cutting
Special x-coating provides excellent heat & oxidation resistance
For next level general purpose milling steel, stainless steel & cast iron
Consistent and reliable performance in general machining conditions
Made from high quality micrograin carbide
Manufactured by global market leader YG-1

Diameter (mm)	3 - 20
Overall Length (mm)	50 - 104
Flute Length (mm)	5 - 38
Shank (mm)	6 - 20

From £16.15 £13.46

View Products

3 Flute K2 Coated Carbide 45 degree Helix Weldon Shank Slot Drill - G9447 Series (YG-1)

The G9G47 series K2 coated carbide milling cutters feature a 45° helix for improved chip evacuation & surface finish. K2 carbide range from global market leaders YG-1 are the number 1 best selling to...

45 degree helix for improved chip evacuation & surface finish
Special K2 coating for longer tool life, high heat and wear resistance
Dry cutting on steel can increase tool life up to 40%
Also suitable for general milling of steel, stainless steel, cast iron & non-ferrous
Consistent and reliable performance in general machining conditions
Made from high-quality micrograin carbide.
Manufactured by global market leader YG-1

Diameter (mm)	3 - 20
Overall Length (mm)	57 - 104
Flute Length (mm)	7 - 32
Shank (mm)	6 - 20

From £22.46 £18.72

View Products

2 Flute K2 Coated Carbide Corner Radius End Mill - G9B82 Series (YG-1)

The G9B82 series K2 coated carbide milling cutters feature a corner radius for reduced cutting forces and improved tool life. K2 carbide range from global market leaders YG-1 are the number 1 best sel...

Corner radius for reduced cutting forces and improved tool life
Special K2 coating for longer tool life, high heat and wear resistance
Dry cutting on steel can increase tool life up to 40%
Also suitable for general milling of steel, stainless steel, cast iron & non-ferrous
Consistent and reliable performance in general machining conditions
Made from high-quality micrograin carbide.
Manufactured by global market leader YG-1

Diameter (mm)	2 - 12
Overall Length (mm)	50 - 75
Flute Length (mm)	4 - 24
Shank (mm)	4 - 12

From £14.51 £12.09

View Products

4 Flute K2 Coated Carbide Corner Radius Short Length End Mill - G9B84 Series (YG-1)

The G9B84 series K2 coated carbide milling cutters feature a corner radius for reduced cutting forces and improved tool life. K2 carbide range from global market leaders YG-1 are the number 1 best sel...

Corner radius for reduced cutting forces and improved tool life
Special K2 coating for longer tool life, high heat and wear resistance
Dry cutting on steel can increase tool life up to 40%
Also suitable for general milling of steel, stainless steel, cast iron & non-ferrous
Consistent and reliable performance in general machining conditions
Made from high-quality micrograin carbide.
Manufactured by global market leader YG-1

Diameter (mm)	2 - 12
Overall Length (mm)	50 - 75
Flute Length (mm)	4 - 24
Shank (mm)	4 - 12

From £14.51 £12.09

View Products

2 Flute K2 Coated Carbide Ball Nose Extra Long Length Slot Drill - G9455 Series (YG-1)

The G9455 series K2 coated carbide milling cutters feature a ball nose for copy milling, full radius grooving & corner radius milling. K2 carbide range from global market leaders YG-1 are the number 1...

Ball nose for copy milling, full radius grooving & corner radius milling
Special K2 coating for longer tool life, high heat and wear resistance
Dry cutting on steel can increase tool life up to 40%
Also suitable for general milling of steel, stainless steel, cast iron & non-ferrous
Consistent and reliable performance in general machining conditions
Made from high-quality micrograin carbide.
Manufactured by global market leader YG-1

Diameter (mm)	3 - 20
Overall Length (mm)	60 - 100
Flute Length (mm)	20 - 45
Shank (mm)	3 - 20

From £22.56 £18.80

View Products

2 Flute K2 Coated Carbide Ball Nose Long Neck Slot Drill - G9B81 (YG-1)

The YG-1 G9B81 series K2 Coated Carbide milling cutters have a ball nose end profile with 2 flutes. These long neck slot drills have a plain shank and are available in diameters ranging from 0.4mm-4mm...

High quality micrograin carbide.
K2 coating with high heat and wear resistance across a wide range of metals.
Dry cutting on steels can increase tool life up to 40%
Consistent and reliable performance in general machining conditions.
Long neck ball nosed for deep pocket milling

Diameter (mm)	0.4 - 4
Overall Length (mm)	50 - 75
Flute Length (mm)	0.7 - 6
Shank (mm)	4 - 6

From £27.60 £23.00

View Products

4 Flute K2 Coated Carbide Chamfer Prep End Mill - G9G50 Series (YG-1)

The G9G50 series K2 coated carbide milling cutters feature a chamfer prep for additional cutting edge protection. K2 carbide range from global market leaders YG-1 are the number 1 best selling tool fo...

Chamfer prep for additional cutting edge protection
Special K2 coating for longer tool life, high heat and wear resistance
Dry cutting on steel can increase tool life up to 40%
Also suitable for general milling of steel, stainless steel, cast iron & non-ferrous
Consistent and reliable performance in general machining conditions
Made from high-quality micrograin carbide.
Manufactured by global market leader YG-1

Diameter (mm)	3 - 20
Overall Length (mm)	32 - 100
Flute Length (mm)	12 - 32
Shank (mm)	3 - 20

From £11.30 £9.42

View Products

4 Flute K2 Coated Carbide Corner Radius Long Length End Mill - G9B85 Series (YG-1)

The G9B85 series K2 coated carbide milling cutters feature a corner radius for reduced cutting forces and improved tool life. K2 carbide range from global market leaders YG-1 are the number 1 best sel...

Corner radius for reduced cutting forces and improved tool life
Special K2 coating for longer tool life, high heat and wear resistance
Dry cutting on steel can increase tool life up to 40%
Also suitable for general milling of steel, stainless steel, cast iron & non-ferrous
Consistent and reliable performance in general machining conditions
Made from high-quality micrograin carbide.
Manufactured by global market leader YG-1

Diameter (mm)	3 - 12
Overall Length (mm)	75 - 100
Flute Length (mm)	6 - 24
Shank (mm)	4 - 12

From £16.34 £13.62

View Products

2 Flute K2 Coated Carbide Ball Nose Long Reach Slot Drill - G9454 Series (YG-1)

The G9454 series K2 coated carbide milling cutters feature a ball nose for copy milling, full radius grooving & corner radius milling. K2 carbide range from global market leaders YG-1 are the number 1...

Ball nose for copy milling, full radius grooving & corner radius milling
Special K2 coating for longer tool life, high heat and wear resistance
Dry cutting on steel can increase tool life up to 40%
Also suitable for general milling of steel, stainless steel, cast iron & non-ferrous
Consistent and reliable performance in general machining conditions
Made from high-quality micrograin carbide.
Manufactured by global market leader YG-1

Diameter (mm)	3 - 20
Overall Length (mm)	75 - 150
Flute Length (mm)	5 - 26
Shank (mm)	3 - 20

From £20.33 £16.94

View Products

2 Flute K2 Coated Carbide Ball Nose Weldon Shank Slot Drill - G9438 Series (YG-1)

The G9438 series K2 coated carbide milling cutters feature a ball nose for copy milling, full radius grooving & corner radius milling. K2 carbide range from global market leaders YG-1 are the number 1...

Ball nose for copy milling, full radius grooving & corner radius milling
Special K2 coating for longer tool life, high heat and wear resistance
Dry cutting on steel can increase tool life up to 40%
Also suitable for general milling of steel, stainless steel, cast iron & non-ferrous
Consistent and reliable performance in general machining conditions
Made from high-quality micrograin carbide.
Manufactured by global market leader YG-1

Diameter (mm)	2 - 20
Overall Length (mm)	38 - 104
Flute Length (mm)	6 - 32
Shank (mm)	3 - 20

From £17.92 £14.93

View Products

2 Flute K2 Coated Carbide Chamfer Prep Short Length Slot Drill - G9G44 Series (YG-1)

The G9424 series K2 coated carbide milling cutters feature a chamfer prep for additional cutting edge protection. K2 carbide range from global market leaders YG-1 are the number 1 best selling tool fo...

Chamfer prep for additional cutting edge protection
Special K2 coating for longer tool life, high heat and wear resistance
Dry cutting on steel can increase tool life up to 40%
Also suitable for general milling of steel, stainless steel, cast iron & non-ferrous
Consistent and reliable performance in general machining conditions
Made from high-quality micrograin carbide.
Manufactured by global market leader YG-1

Diameter (mm)	3 - 20
Overall Length (mm)	32 - 100
Flute Length (mm)	12 - 32
Shank (mm)	3 - 20

From £11.30 £9.42

View Products

3 Flute K2 Coated Carbide Throw-Away Short Length Slot Drill - G9553/G9410 Series (YG-1)

The G9553/G9410 series K2 coated carbide milling cutters feature 3 flutes making them suitable for slotting & profiling applications. K2 carbide range from global market leaders YG-1 are the number 1 ...

3 flutes for slotting & profiling applications
Special K2 coating for longer tool life, high heat and wear resistance
Dry cutting on steel can increase tool life up to 40%
Also suitable for general milling of steel, stainless steel, cast iron & non-ferrous
Consistent and reliable performance in general machining conditions
Made from high-quality micrograin carbide.
Manufactured by global market leader YG-1

Diameter (mm)	0.5 - 20
Overall Length (mm)	35 - 75
Flute Length (mm)	1.5 - 22
Shank (mm)	3 - 20

From £10.44 £8.70

View Products

2 Flute K2 Coated Carbide Weldon Shank Long Length Slot Drill - G9445 Series (YG-1)

The G9445 series K2 coated carbide milling cutters feature 2 flutes making them suitable for slotting applications. K2 carbide range from global market leaders YG-1 are the number 1 best selling tool ...

2 flutes for slotting applications
Special K2 coating for longer tool life, high heat and wear resistance
Dry cutting on steel can increase tool life up to 40%
Also suitable for general milling of steel, stainless steel, cast iron & non-ferrous
Consistent and reliable performance in general machining conditions
Made from high-quality micrograin carbide.
Manufactured by global market leader YG-1

Diameter (mm)	2 - 20
Overall Length (mm)	38 - 104
Flute Length (mm)	6 - 32
Shank (mm)	3 - 20

From £14.14 £11.78

View Products

There are no products in your shopping basket.

Your Basket Summary

Suggestions

Products

Categories

Cutwel