Free Delivery on Orders Over £75 ex vat*
The BEST Technical Advice in the Industry
K2 Coated & NC Mills Carbide Milling Cutters
General purpose coated carbide substrate for general machining of steels, stainless steel, cast iron and non-ferrous metals.
1st choice for general purpose coated carbide machining
- Next generation K2 coating suitable for dry cutting at high temperatures
- K2 coating provides 40% more tool life than TiALN coating
- Ideal for general machining on Steel <HRc45, Stainless Steel and Cast Iron
- Wide range of geometries and lengths
- Also includes NC Mills for general machining of Steel up to <HRc50
-
4 Flute NC Mill Carbide End Mill - G9F42 (YG-1)The YG-1 G9F41 series NC Mill has 4 flutes and a plain shank. These end mills range in diameter from 1mm-20mm. They are ideal for the general machining of steels up to HRc50, Stainless Steel and Cast ... read more >
High quality micrograin carbide.
Exclusive YG-1 X-Coating offers higher performance machining compared to standard TiALN coatings.
... read more >- P
- M
- K
- N
-
4 Flute K2 Coated Carbide End Mill - G9432 (YG-1)The YG-1 G9432 series K2 Coated Carbide milling cutters have 4 flutes and come with a plain shank. These end mills are available in diameters ranging from 1mm-20mm. These are ideal for general machini ... read more >
High quality micrograin carbide.
K2 coating with high heat and wear resistance across a wide range of metals.
Dry cutting on steels ... read more >- P
- M
- K
- N
-
3 Flute K2 Coated Carbide Slot Drill - G9425 (YG-1)The YG-1 G9425 series K2 Coated Carbide milling cutters have 3 flutes and a plain shank. These slot drills range in diameter from 1mm-20mm. These are ideal for general machining of steels up to HRc45, ... read more >
High quality micrograin carbide.
K2 coating with high heat and wear resistance across a wide range of metals.
Dry cutting on steels ... read more >- P
- M
- K
- N
-
3 Flute NC Mill Carbide Slot Drill - G9F43 (YG-1)The YG-1 G9F41 series NC Mill has 3 flutes and a plain shank. These Slot Drills range in diameter from 1mm-20mm. They are ideal for the general machining of steels up to HRc50, Stainless Steel and Cas ... read more >
High quality micrograin carbide.
Exclusive YG-1 X-Coating offers higher performance machining compared to standard TiALN coatings.
... read more >- P
- M
- K
- N
-
2 Flute K2 Coated Carbide Slot Drill - G9424 (YG-1)The YG-1 G9424 series K2 Coated Carbide milling cutters have 2 flutes and a plain shank. These slot drills range in diameter from 1mm-20mm. These are ideal for general machining of steels up to HRc45, ... read more >
High quality micrograin carbide.
K2 coating with high heat and wear resistance across a wide range of metals.
Dry cutting on steels ... read more >- P
- M
- K
- N
-
3 Flute K2 Coated Carbide Slot Drill - G9553/G9410 (YG-1)The YG-1 G9553/G9410 series K2 Coated Carbide milling cutters are low cost throw away versions with 3 flutes. They come with a plain or weldon shank (dependent on size) and range in diameter from 0.5m ... read more >
High quality micrograin carbide.
K2 coating with high heat and wear resistance across a wide range of metals.
Dry cutting on steels ... read more >- P
- M
- K
- N
-
4 Flute K2 Coated Carbide Long Length End Mill - G9453 (YG-1)The YG-1 G9453 series K2 Coated Carbide milling cutters have 4 flutes and come with a plain shank. These end mills are available in diameters ranging from 3mm-20mm. These are ideal for general machini ... read more >
High quality micrograin carbide.
K2 coating with high heat and wear resistance across a wide range of metals.
Dry cutting on steels ... read more >- P
- M
- K
- N
-
2 Flute K2 Coated Carbide Ball Nose Long Neck Slot Drill - G9B81 (YG-1)The YG-1 G9B81 series K2 Coated Carbide milling cutters have a ball nose end profile with 2 flutes. These long neck slot drills have a plain shank and are available in diameters ranging from 0.4mm-4mm ... read more >
High quality micrograin carbide.
K2 coating with high heat and wear resistance across a wide range of metals.
Dry cutting on steels ... read more >- P
- M
- K
- N
-
4 Flute K2 Coated Carbide Corner Radius Standard Length End Mill - G9B84 (YG-1)The YG-1 G9B84 series K2 Coated Carbide milling cutters have 4 flutes and come with a plain shank. These corner radius end mills are available in diameters ranging from 2mm-12mm. These are ideal for g ... read more >
High quality micrograin carbide.
K2 coating with high heat and wear resistance across a wide range of metals.
Dry cutting on steels ... read more >- P
- M
- K
- N
-
2 Flute K2 Coated Carbide Long Neck Slot Drill - G9B80 (YG-1)The YG-1 G9B80 series K2 Coated Carbide milling cutters have 2 flutes and a plain shank. These have a long neck for deep pocket milling. They range in diameter from 0.4mm-4mm. These are ideal for gene ... read more >
High quality micrograin carbide.
Long neck for deep pocket milling
K2 coating with high heat and wear resistance across a wide rang ... read more >- P
- M
- K
- N
-
2 Flute NC Mill Carbide Ball Nose Slot Drill - G9F44 (YG-1)The YG-1 G9F41 series NC Mill has 2 flutes and a plain shank. These end mills range in diameter from 2mm-20mm and has a ball nosed radius. They are ideal for the general machining of steels up to HRc5 ... read more >
High quality micrograin carbide.
Exclusive YG-1 X-Coating offers higher performance machining compared to standard TiALN coatings.
... read more >- P
- M
- K
- N
-
2 Flute K2 Coated Carbide Ball Nose Short Length Slot Drill - G9624 (YG-1)The YG-1 G9624 series K2 Coated Carbide milling cutters have a ball nose end profile with 2 flutes. These slot drills have a plain shank and are available in diameters ranging from 2mm-20mm. These are ... read more >
High quality micrograin carbide.
K2 coating with high heat and wear resistance across a wide range of metals.
Dry cutting on steels ... read more >- P
- M
- S
- K
- N
-
2 Flute NC Mill Carbide Slot Drill - G9F41 (YG-1)The YG-1 G9F41 series NC Mill has 2 flutes and a plain shank. These slot drills range in diameter from 1mm-20mm. They are ideal for the general machining of steels up to HRc50, Stainless Steel and Cas ... read more >
High quality micrograin carbide.
Exclusive YG-1 X-Coating offers higher performance machining compared to standard TiALN coatings.
... read more >- P
- M
- K
- N
-
2 Flute K2 Coated Carbide Ball Nose Long Reach Slot Drill - G9454 (YG-1)The YG-1 G9454 series K2 Coated Carbide milling cutters have a ball nose end profile with 2 flutes. These long reach slot drills have a plain shank and are available in diameters ranging from 3mm-20mm ... read more >
High quality micrograin carbide.
K2 coating with high heat and wear resistance across a wide range of metals.
Dry cutting on steels ... read more >- P
- M
- K
- N
-
4 Flute K2 Coated Carbide End Mill - G9449 (YG-1)The YG-1 G9449 series K2 Coated Carbide milling cutters have 4 flutes and come with a flat/weldon shank. These end mills are available in diameters ranging from 1mm-20mm. These are ideal for general m ... read more >
High quality micrograin carbide.
K2 coating with high heat and wear resistance across a wide range of metals.
Dry cutting on steels ... read more >- P
- M
- K
- N
-
4 Flute K2 Coated Carbide Chamfer Prep End Mill - G9G51 (YG-1)The YG-1 G9G51 series K2 Coated Carbide milling cutters have 4 flutes and come with a flat/weldon shank. These end mills are available in diameters ranging from 1mm-20mm. These are ideal for general m ... read more >
High quality micrograin carbide.
K2 coating with high heat and wear resistance across a wide range of metals.
Dry cutting on steels ... read more >- P
- M
- K
- N
-
4 Flute K2 Coated Carbide Chamfer Prep End Mill - G9G50 (YG-1)The YG-1 G9G50 series K2 Coated Carbide milling cutters have 4 flutes and come with a plain shank. These end mills are available in diameters ranging from 3mm-20mm. These are ideal for general machini ... read more >
High quality micrograin carbide.
K2 coating with high heat and wear resistance across a wide range of metals.
Dry cutting on steels ... read more >- P
- M
- K
- N
-
3 Flute K2 Coated Carbide 45 degree Helix Chamfer Prep Slot Drill - G9G49 (YG-1)The YG-1 G9G47 series K2 Coated Carbide milling cutters have 3 flutes, a flat/weldon shank and a 45 degree helix for improved chip control. These slot drills range in diameter from 3mm-20mm. These are ... read more >
High quality micrograin carbide.
K2 coating with high heat and wear resistance across a wide range of metals.
45 degree helix and d ... read more >- P
- M
- K
- N
-
3 Flute K2 Coated Carbide Chamfer Prep Slot Drill - G9G47 (YG-1)The YG-1 G9G47 series K2 Coated Carbide milling cutters have 3 flutes and a plain shank. These slot drills range in diameter from 1mm-20mm. These are ideal for general machining of steels up to HRc45, ... read more >
High quality micrograin carbide.
K2 coating with high heat and wear resistance across a wide range of metals.
Dry cutting on steels ... read more >- P
- M
- K
- N
-
3 Flute K2 Coated Carbide Chamfer Prep Throw-Away Slot Drill - G9G46 (YG-1)The YG-1 G9G46 series K2 Coated Carbide milling cutters are low cost throw away slot drills with 3 flutes. They come with a flat/weldon shank and range in diameter from 3mm-20mm. These are ideal for g ... read more >
High quality micrograin carbide.
K2 coating with high heat and wear resistance across a wide range of metals.
Dry cutting on steels ... read more >- P
- M
- K
- N
-
2 Flute K2 Coated Carbide Chamfer Prep Weldon Shank Slot Drill - G9G45 (YG-1)The YG-1 G9G45 series K2 Coated Carbide milling cutters have 2 flutes and a weldon/flat shank. These slot drills range in diameter from 2mm-20mm. These are ideal for general machining of steels up to ... read more >
High quality micrograin carbide.
K2 coating with high heat and wear resistance across a wide range of metals.
Dry cutting on steels ... read more >- P
- M
- K
- N
-
2 Flute K2 Coated Carbide Chamfer Prep Slot Drill - G9G44 (YG-1)The YG-1 G9G44 series K2 Coated Carbide milling cutters have 2 flutes and a plain shank. These slot drills range in diameter from 1mm-20mm. These are ideal for general machining of steels up to HRc45, ... read more >
High quality micrograin carbide.
K2 coating with high heat and wear resistance across a wide range of metals.
Dry cutting on steels ... read more >- P
- M
- K
- N
-
4 Flute K2 Coated Carbide 45 degree Helix End Mill - G9F45 (YG-1)The YG-1 G9F45 series K2 Coated Carbide milling cutters have 4-6 flutes and come with a plain shank. These end mills are available in diameters ranging from 3mm-20mm. Exceptional performance in finish ... read more >
High quality micrograin carbide.
K2 coating with high heat and wear resistance across a wide range of metals.
Dry cutting on steels ... read more >- P
- H
- K
-
4 Flute K2 Coated Carbide Corner Radius Long Length End Mill - G9B85 (YG-1)The YG-1 G9B85 series K2 Coated Carbide milling cutters have 4 flutes and come with a plain shank. These corner radius end mills are available in diameters ranging from 3mm-12mm. These are ideal for g ... read more >
High quality micrograin carbide.
K2 coating with high heat and wear resistance across a wide range of metals.
Dry cutting on steels ... read more >- P
- M
- K
- N
-
2 Flute K2 Coated Carbide Corner Radius Long Length Slot Drill - G9B83 (YG-1)The YG-1 G9B83 series K2 Coated Carbide milling cutters have 2 flutes and come with a plain shank. These corner radius slot drills are available in diameters ranging from 3mm-12mm. These are ideal for ... read more >
High quality micrograin carbide.
K2 coating with high heat and wear resistance across a wide range of metals.
Dry cutting on steels ... read more >- P
- M
- K
- N
