• Free Delivery on Orders Over £79 ex vat*
    *View Terms & Conditions

  • The BEST Technical Advice in the Industry
    Call Our Tech Team on 01924 869 615

Composite Machining Milling Cutters

For high performance and extreme tool life on composite materials. Ideal for carbon fibre, glass fibre, titanium, aramid, high silicon aluminium & glass filled plastics

Composite Machining Milling Cutters

For high performance and extreme tool life on composite materials. Ideal for carbon fibre, glass fibre, titanium, aramid, high silicon aluminium & glass filled plastics

High performance milling cutters for composite materials

 

  • Includes premium diamond coated milling cutters
  • Specialist range for mlling highly abrasive metals, plastics & composites
  • Lapped flutes & double helix to prevent built up edge
  • Special geometries to prevent delamination of composites
  • Premium range from Karnasch made in Germany

Showing 1-28 of 28

Page
Set Descending Direction
  1. 8 Flute Diamond Coated Carbide Drawing Cut Rougher Finisher - 29.1762 (Karnasch)
    8 Flute Diamond Coated Carbide Drawing Cut Rougher Finisher - 29.1762 (Karnasch)
    The 29.1762 series from Karnasch is an Diamond coated carbide 8 flute rougher finisher with drawing cut geometry. These are ideal for machining carbon fibre, glass reinforced plastics, honeycomb, alum ... read more >
    For Carbon Fibre, Glass Reinforced Plastics, Honeycomb, Aluminium & Abrasive Engineered Plastics.
    Diamond Coated Carbide is highly effective ... read more >
    • N

    Starting at £134.47 £112.06

    View Products
    • D2 (Shank): 6 - 20
    • L1 (Flute Length): 16 - 80
    • L2 (Overall Length): 60 - 150
    • D1 (Diameter): 4 - 20
    29.1762
  2. 8 Flute Diamond Coated Carbide Drawing Cut Pushing Finisher - 29.1763 (Karnasch)
    8 Flute Diamond Coated Carbide Drawing Cut Pushing Finisher - 29.1763 (Karnasch)
    The 29.1763 series from Karnasch is an Diamond coated carbide 8 flute rougher finisher with pushing cut geometry. These are ideal for machining carbon fibre, glass reinforced plastics, honeycomb, alum ... read more >
    For Carbon Fibre, Glass Reinforced Plastics, Honeycomb, Aluminium & Abrasive Engineered Plastics.
    Diamond Coated Carbide is highly effective ... read more >
    • N

    Starting at £134.47 £112.06

    View Products
    • D2 (Shank): 6 - 20
    • L1 (Flute Length): 16 - 80
    • L2 (Overall Length): 60 - 150
    • D1 (Diameter): 4 - 20
    29.1763
  3. 2 Flute PCD Diamond Extreme Hardness End Mill - 30.6524 (Karnasch)
    2 Flute PCD Diamond Extreme Hardness End Mill - 30.6524 (Karnasch)
    The 30.6524 series from Karnasch is an extreme hardness PCD Diamond End Mill ranging from 3-12mm diameter. The special PCD EXTREME has a higher hardness than standard PCD and is laser ground to produc ... read more >
    For Carbon Fibre, Glass Reinforced Plastics, Aluminium, Copper & Brass.
    PCD EXTREME diamond coated carbide.
    PCD Extreme is a premium g ... read more >
    • N

    Starting at £201.12 £167.60

    View Products
    • D2 (Shank): 6 - 12
    • L1 (Flute Length): 2.5 - 9
    • L2 (Overall Length): 75 - 105
    • D1 (Diameter): 3 - 12
    30.6524
  4. 2 Flute PCD Diamond Extreme Hardness Ball Nose End Mill - 30.6522 (Karnasch)
    2 Flute PCD Diamond Extreme Hardness Ball Nose End Mill - 30.6522 (Karnasch)
    The 30.6522 series from Karnasch is an extreme hardness PCD Diamond ball nose End Mill ranging from 3-12mm diameter. The special PCD EXTREME has a higher hardness than standard PCD and is laser ground ... read more >
    For Carbon Fibre, Glass Reinforced Plastics, Aluminium, Copper & Brass.
    PCD EXTREME diamond coated carbide.
    PCD Extreme is a premium g ... read more >
    • N

    Starting at £164.14 £136.78

    View Products
    • D2 (Shank): 6 - 12
    • L1 (Flute Length): 2.5 - 10
    • L2 (Overall Length): 75 - 105
    • D1 (Diameter): 3 - 12
    30.6522
  5. 2 Flute PCD Diamond Extreme Hardness Corner Radius End Mill - 30.6523 (Karnasch)
    2 Flute PCD Diamond Extreme Hardness Corner Radius End Mill - 30.6523 (Karnasch)
    The 30.6523 series from Karnasch is an extreme hardness PCD Diamond corner radius End Mill ranging from 3-12mm diameter. The special PCD EXTREME has a higher hardness than standard PCD and is laser gr ... read more >
    For Carbon Fibre, Glass Reinforced Plastics, Aluminium, Copper & Brass.
    PCD EXTREME diamond coated carbide.
    PCD Extreme is a premium g ... read more >
    • N

    Starting at £178.78 £148.98

    View Products
    • D2 (Shank): 6 - 12
    • L1 (Flute Length): 2.5 - 9
    • L2 (Overall Length): 75 - 105
    • D1 (Diameter): 3 - 12
    30.6523
  6. 2 Flute PCD Diamond Extreme Hardness V-Type End Mill - 30.6528 (Karnasch)
    2 Flute PCD Diamond Extreme Hardness V-Type End Mill - 30.6528 (Karnasch)
    The 30.6523 series from Karnasch is an extreme hardness PCD Diamond V-type End Mill. "V" mill for burr-free milling of upper and lower edge of fibre-reinforced plastics. The special PCD EXTREME has a ... read more >
    For Carbon Fibre, Glass Reinforced Plastics, Aluminium, Copper & Brass.
    PCD EXTREME diamond coated carbide.
    PCD Extreme is a premium g ... read more >
    • N

    Starting at £803.94 £669.95

    View Products
    • D2 (Shank): 10 - 12
    • L1 (Flute Length): 22 - 26
    • L2 (Overall Length): 72 - 82
    • D1 (Diameter): 10 - 12
    30.6528
  7. 2 Flute CVD Diamond Reduced Neck End Mill - 29.6524 (Karnasch)
    2 Flute CVD Diamond Reduced Neck End Mill - 29.6524 (Karnasch)
    The 29.6524 series from Karnasch is a CVD Diamond reduced neck end mill which ranges from 2-12mm diameter. CVD (99.9% diamond) have 4-5 times the tool life comapred to PCD and are ideal for carbon fib ... read more >
    For Carbon Fibre, Glass Reinforced Plastics, Kevlar, Aramid, Titanium & Abrasive Plastics.
    0.1mm chamfer edge preparation protects the cutting e ... read more >
    • N

    Starting at £212.22 £176.85

    View Products
    • D2 (Shank): 4 - 12
    • L1 (Flute Length): 2 - 2
    • L2 (Overall Length): 50 - 105
    • D1 (Diameter): 2 - 12
    29.6524
  8. 2 Flute CVD Diamond Long Edge Chamfer Prep End Mill - 29.6525 (Karnasch)
    2 Flute CVD Diamond Long Edge Chamfer Prep End Mill - 29.6525 (Karnasch)
    The 29.6525 series from Karnasch is a CVD Diamond reduced neck end mill which ranges from 3-16mm diameter. CVD (99.9% diamond) have 4-5 times the tool life comapred to PCD and are ideal for carbon fib ... read more >
    For Carbon Fibre, Glass Reinforced Plastics, Kevlar, Aramid, Titanium & Abrasive Plastics.
    0.1mm chamfer edge preparation protects the cutting e ... read more >
    • N

    Starting at £245.69 £204.74

    View Products
    • D2 (Shank): 6 - 16
    • L1 (Flute Length): 5 - 20
    • L2 (Overall Length): 50 - 75
    • D1 (Diameter): 3 - 16
    29.6525
  9. 2 Flute CVD Diamond Long Edge Reduced Neck Chamfer Prep End Mill - 29.6526 (Karnasch)
    2 Flute CVD Diamond Long Edge Reduced Neck Chamfer Prep End Mill - 29.6526 (Karnasch)
    The 29.6526 series from Karnasch is a CVD Diamond reduced neck end mill which ranges from 4-16mm diameter. CVD (99.9% diamond) have 4-5 times the tool life comapred to PCD and are ideal for carbon fib ... read more >
    For Carbon Fibre, Glass Reinforced Plastics, Kevlar, Aramid, Titanium & Abrasive Plastics.
    0.1mm chamfer edge preparation protects the cutting e ... read more >
    • N

    Starting at £305.27 £254.39

    View Products
    • D2 (Shank): 6 - 16
    • L1 (Flute Length): 8 - 20
    • L2 (Overall Length): 50 - 102
    • D1 (Diameter): 4 - 16
    29.6526
  10. 2 Flute CVD Diamond Reduced Neck Corner Radius End Mill - 29.6523 (Karnasch)
    2 Flute CVD Diamond Reduced Neck Corner Radius End Mill - 29.6523 (Karnasch)
    The 29.6523 series from Karnasch is a CVD Diamond reduced neck corner radius end mill which ranges from 2-12mm diameter. CVD (99.9% diamond) have 4-5 times the tool life comapred to PCD and are ideal ... read more >
    For Carbon Fibre, Glass Reinforced Plastics, Kevlar, Aramid, Titanium & Abrasive Plastics.
    0.1mm chamfer edge preparation protects the cutting e ... read more >
    • N

    Starting at £212.22 £176.85

    View Products
    • D2 (Shank): 4 - 12
    • L1 (Flute Length): 2.5 - 9
    • L2 (Overall Length): 50 - 105
    • D1 (Diameter): 2 - 12
    29.6523
  11. 2 Flute CVD Diamond Reduced Neck Ball Nose End Mill - 29.6522 (Karnasch)
    2 Flute CVD Diamond Reduced Neck Ball Nose End Mill - 29.6522 (Karnasch)
    The 29.6522 series from Karnasch is a CVD Diamond reduced neck ball nose end mill which ranges from 2-12mm diameter. CVD (99.9% diamond) have 4-5 times the tool life comapred to PCD and are ideal for ... read more >
    For Carbon Fibre, Glass Reinforced Plastics, Aluminium, Copper & Brass.
    0.1mm chamfer edge preparation protects the cutting edge.
    CVD ... read more >
    • N

    Starting at £212.22 £176.85

    View Products
    • D2 (Shank): 4 - 12
    • L1 (Flute Length): 2.5 - 9
    • L2 (Overall Length): 50 - 105
    • D1 (Diameter): 2 - 12
    29.6522
  12. 3-5 Flute CVC Diamond Coated Through Coolant Spiked Cutter - 29.6553 (Karnasch)
    3-5 Flute CVC Diamond Coated Through Coolant Spiked Cutter - 29.6553 (Karnasch)
    The 29.6553 series from Karnasch is a CVD Diamond spiked cutter with cooling channels which ranges from 8-20mm diameter. CVD (99.9% diamond) have 4-5 times the tool life compared to PCD and are ideal ... read more >
    For Carbon Fibre, Glass Reinforced Plastics, Aluminium, Copper & Brass.
    CVD Diamond is the ultimate composite milling tool, twice as hard as ... read more >
    • N

    Starting at £873.96 £728.30

    View Products
    • D2 (Shank): 8 - 20
    • L1 (Flute Length): 15 - 30
    • L2 (Overall Length): 65 - 100
    • D1 (Diameter): 8 - 20
    29.6553
  13. 3-4 Flute CVD Diamond Up & Down End Mill - 29.6562 (Karnasch)
    3-4 Flute CVD Diamond Up & Down End Mill - 29.6562 (Karnasch)
    The 29.6562 series from Karnasch is a CVD Diamond Up & Down end mill which ranges from 8-15mm diameter. CVD (99.9% diamond) have 4-5 times the tool life compared to PCD and are ideal for carbon fibre, ... read more >
    For Carbon Fibre, Glass Reinforced Plastics, Aluminium, Copper & Brass.
    CVD Diamond is the ultimate composite milling tool, twice as hard as ... read more >
    • N

    Starting at £519.95 £433.29

    View Products
    • D2 (Shank): 8 - 16
    • L1 (Flute Length): 15 - 25
    • L2 (Overall Length): 65 - 90
    • D1 (Diameter): 8 - 16
    29.6562
  14. 5-9 Flute CVD Diamond Super Finish Straight Cut End Mill - 29.6572 (Karnasch)
    5-9 Flute CVD Diamond Super Finish Straight Cut End Mill - 29.6572 (Karnasch)
    The 29.6572 series from Karnasch is a CVD Diamond end mill which ranges from 8-16mm diameter. It has a 5-9 flute super finish style for ultimate surface finish with straight cut geometry. CVD (99.9% d ... read more >
    For Carbon Fibre, Glass Reinforced Plastics, Aluminium, Copper & Brass.
    CVD Diamond is the ultimate composite milling tool, twice as hard as ... read more >
    • N

    Starting at £617.69 £514.74

    View Products
    • D2 (Shank): 8 - 16
    • L1 (Flute Length): 55 - 80
    • L2 (Overall Length): 10 - 25
    • D1 (Diameter): 8 - 16
    29.6572
  15. 4&6 Flute Diamond Coated Carbide V Style Compression Tool - 29.0412 (Karnasch)
    4&6 Flute Diamond Coated Carbide V Style Compression Tool - 29.0412 (Karnasch)
    The 29.0412 series from Karnasch is a diamond coated carbide v-style compression tool. Diameters range from 6-16mm and the compression geometry prevents delamination on upper and lower edges in fibre- ... read more >
    For Carbon Fibre, Glass Reinforced Plastics, Kevlar, Aramid & Highly Abrasive Engineered Plastics.
    Diamond Coated Carbide is highly effectiv ... read more >
    • N

    Starting at £108.60 £90.50

    View Products
    • D2 (Shank): 6 - 16
    • L1 (Flute Length): 16 - 48
    • L2 (Overall Length): 58 - 110
    • D1 (Diameter): 6 - 16
    29.0412
  16. 4&6 Flute Diamond Coated Carbide VR Style Compression Tool - 29.0416 (Karnasch)
    4&6 Flute Diamond Coated Carbide VR Style Compression Tool - 29.0416 (Karnasch)
    The 29.0416 series from Karnasch is a diamond coated carbide v.r-style compression tool. Diameters range from 6-12mm and the compression geometry prevents delamination on upper and lower edges in fibr ... read more >
    For Carbon Fibre, Glass Reinforced Plastics, Kevlar, Aramid & Highly Abrasive Engineered Plastics.
    Diamond Coated Carbide is highly effectiv ... read more >
    • N

    Starting at £112.28 £93.57

    View Products
    • D2 (Shank): 6 - 12
    • L1 (Flute Length): 16 - 28
    • L2 (Overall Length): 58 - 85
    • D1 (Diameter): 6 - 12
    29.0416
  17. 4-8 Flute Diamond Coated Carbide End Mill - 29.0305 (Karnasch)
    4-8 Flute Diamond Coated Carbide End Mill - 29.0305 (Karnasch)
    The 29.0305 series from Karnasch is a diamond coated carbide end mill. Diameters range from 3-20mm and the 15° helix with unequal indexing prevent vibration at high speeds These are suitable for use ... read more >
    For Carbon Fibre, Glass Reinforced Plastics, Kevlar, Aramid & Highly Abrasive Engineered Plastics.
    Diamond Coated Carbide is highly effectiv ... read more >
    • N

    Starting at £106.12 £88.43

    View Products
    • D2 (Shank): 4 - 20
    • L1 (Flute Length): 10 - 42
    • L2 (Overall Length): 40 - 105
    • D1 (Diameter): 3 - 20
    29.0305
  18. 4 Flute Diamond Coated Carbide Corner Radius End Mill - GUF39 (YG-1)
    4 Flute Diamond Coated Carbide Corner Radius End Mill - GUF39 (YG-1)
    The GUF39 series from YG-1 is a diamond coated carbide corner radius end mill. Diameters range from 6-12mm and this comes with a 15° helix. These are suitable for use on For Carbon Fibre, Glass Rei ... read more >
    For Carbon Fibre, Glass Reinforced Plastics, Kevlar, Aramid & Highly Abrasive Engineered Plastics.
    Diamond Coated Carbide is highly effectiv ... read more >
    • N

    Starting at £143.44 £119.53

    View Products
    • D2 (Shank): 10 - 12
    • L1 (Flute Length): 30 - 36
    • L2 (Overall Length): 80 - 100
    • D1 (Diameter): 10 - 12
    GUF39
  19. Uncoated Carbide Fibreglass Router - 11.6001 (Karnasch)
    Uncoated Carbide Fibreglass Router - 11.6001 (Karnasch)
    The 11.6001 series from Karnasch is a Uncoated carbide fibreglass router. These routers are for contouring, grooving, drilling of a wide range of GFK, CFK, fiberglass reinforced plastics, as well as M ... read more >
    For Fibreglass, Kevlar, Sandwich Materials, CFRP & Aramid.
    Uncoated polished carbide.
    These routers are for contouring, grooving, dril ... read more >
    • N

    Starting at £8.66 £7.22

    View Products
    • D2 (Shank): 3 - 12
    • L1 (Flute Length): 5 - 30
    • L2 (Overall Length): 38 - 75
    • D1 (Diameter): 1.6 - 12
    11.6001
  20. Uncoated Carbide Fibreglass Router with Burr End Cut - 11.6002 (Karnasch)
    Uncoated Carbide Fibreglass Router with Burr End Cut - 11.6002 (Karnasch)
    The 11.6002 series from Karnasch is an uncoated carbide fibreglass router. These routers are for contouring, grooving, drilling of a wide range of GFK, CFK, fiberglass reinforced plastics, as well as ... read more >
    For Fibreglass, Kevlar, Sandwich Materials, CFRP & Aramid.
    Uncoated polished carbide.
    These routers are for contouring, grooving, dril ... read more >
    • N

    Starting at £13.12 £10.93

    View Products
    • D2 (Shank): 3 - 12
    • L1 (Flute Length): 5 - 25
    • L2 (Overall Length): 38 - 75
    • D1 (Diameter): 1.6 - 12
    11.6002
  21. Uncoated Carbide Fibreglass Router with End Mill Cut - 11.6003 (Karnasch)
    Uncoated Carbide Fibreglass Router with End Mill Cut - 11.6003 (Karnasch)
    The 11.6003 series from Karnasch is an uncoated carbide fibreglass router. These routers are for contouring, grooving, drilling of a wide range of GFK, CFK, fiberglass reinforced plastics, as well as ... read more >
    For Fibreglass, Kevlar, Sandwich Materials, CFRP & Aramid.
    Uncoated polished carbide.
    These routers are for contouring, grooving, dril ... read more >
    • N

    Starting at £11.51 £9.59

    View Products
    • D2 (Shank): 3 - 12
    • L1 (Flute Length): 5 - 25
    • L2 (Overall Length): 38 - 75
    • D1 (Diameter): 1.6 - 12
    11.6003
  22. Uncoated Carbide Honeycomb Router - 29.1783 (Karnasch)
    Uncoated Carbide Honeycomb Router - 29.1783 (Karnasch)
    The 29.1783 series from Karnasch is an uncoated carbide honeycomb router. These have a special tooth profile and right hand twisted drawing cut for high speed honeycomb routing. Also suitable for carb ... read more >
    Special geometry with right hand twisted drawing cut for Honeycomb.
    Also suitable for use on Carbon Fibre.
    Uncoated polished carbide.
    ... read more >
    • N

    Starting at £24.96 £20.80

    View Products
    • D2 (Shank): 5 - 20
    • L1 (Flute Length): 16 - 45
    • L2 (Overall Length): 50 - 104
    • D1 (Diameter): 5 - 20
    29.1783
  23. 8 Flute NHC Coated Carbide Straight Cut Rougher Finisher - 29.1751 (Karnasch)
    8 Flute NHC Coated Carbide Straight Cut Rougher Finisher - 29.1751 (Karnasch)
    The 29.1751 series from Karnasch is an NHC700 coated carbide 8 flute rougher finisher with straight cut geometry. These are ideal for machining carbon fibre, glass reinforced plastics, honeycomb, alum ... read more >
    For Carbon Fibre, Glass Reinforced Plastics, Honeycomb, Aluminium & Abrasive Engineered Plastics.
    NHC700 coated carbide.
    8 flutes, sui ... read more >
    • N

    Starting at £93.55 £77.96

    View Products
    • D2 (Shank): 6 - 20
    • L1 (Flute Length): 16 - 80
    • L2 (Overall Length): 60 - 150
    • D1 (Diameter): 4 - 20
    29.1751
  24. 8 Flute NHC Coated Carbide Drawing Cut Rougher Finisher - 29.1752 (Karnasch)
    8 Flute NHC Coated Carbide Drawing Cut Rougher Finisher - 29.1752 (Karnasch)
    The 29.1752 series from Karnasch is an NHC700 coated carbide 8 flute rougher finisher with drawing cut geometry. These are ideal for machining carbon fibre, glass reinforced plastics, honeycomb, alumi ... read more >
    For Carbon Fibre, Glass Reinforced Plastics, Honeycomb, Aluminium & Abrasive Engineered Plastics.
    NHC700 coated carbide.
    8 flutes, sui ... read more >
    • N

    Starting at £93.55 £77.96

    View Products
    • D2 (Shank): 6 - 20
    • L1 (Flute Length): 16 - 80
    • L2 (Overall Length): 60 - 150
    • D1 (Diameter): 4 - 20
    29.1752
  25. 8 Flute NHC Coated Carbide Pushing Cut Rougher Finisher - 29.1753 (Karnasch)
    8 Flute NHC Coated Carbide Pushing Cut Rougher Finisher - 29.1753 (Karnasch)
    The 29.1753 series from Karnasch is an NHC700 coated carbide 8 flute rougher finisher with pushing cut geometry. These are ideal for machining carbon fibre, glass reinforced plastics, honeycomb, alumi ... read more >
    For Carbon Fibre, Glass Reinforced Plastics, Honeycomb, Aluminium & Abrasive Engineered Plastics.
    NHC700 coated carbide.
    8 flutes, sui ... read more >
    • N

    Starting at £93.55 £77.96

    View Products
    • D2 (Shank): 6 - 20
    • L1 (Flute Length): 16 - 80
    • L2 (Overall Length): 60 - 150
    • D1 (Diameter): 4 - 20
    29.1753
  26. 8 Flute Diamond Coated Carbide Straight Cut Rougher Finisher - 29.1761 (Karnasch)
    8 Flute Diamond Coated Carbide Straight Cut Rougher Finisher - 29.1761 (Karnasch)
    The 29.1761 series from Karnasch is an Diamond coated carbide 8 flute rougher finisher with straight cut geometry. These are ideal for machining carbon fibre, glass reinforced plastics, honeycomb, alu ... read more >
    For Carbon Fibre, Glass Reinforced Plastics, Honeycomb, Aluminium & Abrasive Engineered Plastics.
    Diamond Coated Carbide is highly effective ... read more >
    • N

    Starting at £134.47 £112.06

    View Products
    • D2 (Shank): 6 - 20
    • L1 (Flute Length): 16 - 80
    • L2 (Overall Length): 60 - 150
    • D1 (Diameter): 4 - 20
    29.1761

Showing 1-28 of 28

Page
Set Descending Direction