The 29.0412 series from Karnasch is a diamond coated carbide v-style compression tool. Diameters range from 6-16mm and the compression geometry prevents delamination on upper and lower edges in fibre-reinforced plastics. These are suitable for use on For Carbon Fibre, Glass Reinforced Plastics, Kevlar, Aramid & Highly Abrasive Engineered Plastics.
N
Carbon Steel ~ HB 225
Alloy Steels HB225-325
Pre-Hardened Steel HRc30~40
Hardened Steels HRc-40-45
Hardened Steels HRc-45-55
High Hardened Steels HRc55-70
Stainless Steel
Titanium
HRSA's (Heat Resistant Super Alloys)
Cast Iron
Copper
Aluminium
Graphite
Plastic
Composites
ExcellentGood
GBP
product
https://www.cutwel.co.uk/10mm-4&6-flute-diamond-coated-carbide-v-style-compression-tool-290412-karnasch-290412100032558310mm 6 Flute Diamond Coated Carbide V Style Compression Tool - 29.0412 (Karnasch)https://www.cutwel.co.uk/media/catalog/product/2/9/290412-diamond-coated-v-style-compression-tool-1.jpg193.09193.090000GBPInStock/Milling Tools/Milling Cutters/Non-Ferrous Milling Cutters/Composite Machining Milling CuttersThe 29.0412 series from Karnasch is a diamond coated carbide v-style compression tool. Diameters range from 6-16mm and the compression geometry prevents delamination on upper and lower edges in fibre-reinforced plastics. These are suitable for use on For Carbon Fibre, Glass Reinforced Plastics, Kevlar, Aramid & Highly Abrasive Engineered Plastics. <li>For Carbon Fibre, Glass Reinforced Plastics, Kevlar, Aramid & Highly Abrasive Engineered Plastics.</li>
<li>Diamond Coated Carbide is highly effective for machining most composite materials, ideal where tool cost is import or a special geometry is required.</li>
<li>V-Style compression geometry prevents delamination on upper and lower edges in fibre-reinforced plastics.</li>GBP00https://www.cutwel.co.uk/media/catalog/product/2/9/290412-diamond-coated-v-style-compression-tool-2.jpghttps://www.cutwel.co.uk/media/catalog/product/2/9/290412-diamond-coated-v-style-compression-tool-3.jpgadd-to-cart290412100032