The 29.0305 series from Karnasch is a diamond coated carbide end mill. Diameters range from 3-20mm and the 15° helix with unequal indexing prevent vibration at high speeds These are suitable for use on For Carbon Fibre, Glass Reinforced Plastics, Kevlar, Aramid & Highly Abrasive Engineered Plastics.
N
Carbon Steel ~ HB 225
Alloy Steels HB225-325
Pre-Hardened Steel HRc30~40
Hardened Steels HRc-40-45
Hardened Steels HRc-45-55
High Hardened Steels HRc55-70
Stainless Steel
Titanium
HRSA's (Heat Resistant Super Alloys)
Cast Iron
Copper
Aluminium
Graphite
Plastic
Composites
ExcellentGood
GBP
product
https://www.cutwel.co.uk/12mm-4-8-flute-diamond-coated-carbide-end-mill-290305-karnasch-29030512004004561112mm 4 Flute Diamond Coated Carbide End Mill - 29.0305 (Karnasch)https://www.cutwel.co.uk/media/catalog/product/2/9/290305-diamond-coated-carbide-end-mill-1.jpg215.65215.650000GBPInStock/Milling Tools/Milling Cutters/Non-Ferrous Milling Cutters/Composite Machining Milling Cutters/Landing Pages/Shop By/Shop All Milling Cutters/Landing Pages/Shop By/Shop By Milling Cutter Type/Square End Milling CuttersThe 29.0305 series from Karnasch is a diamond coated carbide end mill. Diameters range from 3-20mm and the 15° helix with unequal indexing prevent vibration at high speeds These are suitable for use on For Carbon Fibre, Glass Reinforced Plastics, Kevlar, Aramid & Highly Abrasive Engineered Plastics. <li>For Carbon Fibre, Glass Reinforced Plastics, Kevlar, Aramid & Highly Abrasive Engineered Plastics.</li>
<li>Diamond Coated Carbide is highly effective for machining most composite materials, ideal where tool cost is import or a special geometry is required.</li>
<li>15° helix & unequal indexing prevent vibration at high speeds.</li>
<li>Optimal machining data must be determined during the run-in phase.</li>GBP00https://www.cutwel.co.uk/media/catalog/product/2/9/290305-diamond-coated-carbide-end-mill-2.jpghttps://www.cutwel.co.uk/media/catalog/product/2/9/290305-diamond-coated-carbide-end-mill-3.jpgadd-to-cart29030512004004