4mm Uncoated Carbide Fibreglass Router with Burr End Cut - 11.6002 (Karnasch)
(116002012)
Performance
£40.78£33.98
The 11.6002 series from Karnasch is an uncoated carbide fibreglass router. These routers are for contouring, grooving, drilling of a wide range of GFK, CFK, fiberglass reinforced plastics, as well as MMC (Metal Matrix Composites). ceramic with glass fiber, graphite, carbon etc. Diameters range from 1.6-12mm and comes with a burr end cut.
N
Carbon Steel ~ HB 225
Alloy Steels HB225-325
Pre-Hardened Steel HRc30~40
Hardened Steels HRc-40-45
Hardened Steels HRc-45-55
High Hardened Steels HRc55-70
Stainless Steel
Titanium
HRSA's (Heat Resistant Super Alloys)
Cast Iron
Copper
Aluminium
Graphite
Plastic
Composites
ExcellentGood
GBP
product
https://www.cutwel.co.uk/4mm-uncoated-carbide-fibreglass-router-with-burr-end-cut-116002-karnasch-11600201256424mm Uncoated Carbide Fibreglass Router with Burr End Cut - 11.6002 (Karnasch)https://www.cutwel.co.uk/media/catalog/product/1/1/116002-uncoated-carbide-fibreglass-router-1.jpg33.9833.980000GBPInStock/Milling Tools/Milling Cutters/Non-Ferrous Milling Cutters/Composite Machining Milling Cutters/Landing Pages/Shop By/Shop All Milling Cutters/Landing Pages/Shop By/Shop By Milling Cutter Type/Square End Milling CuttersThe 11.6002 series from Karnasch is an uncoated carbide fibreglass router. These routers are for contouring, grooving, drilling of a wide range of GFK, CFK, fiberglass reinforced plastics, as well as MMC (Metal Matrix Composites). ceramic with glass fiber, graphite, carbon etc. Diameters range from 1.6-12mm and comes with a burr end cut. <li>For Fibreglass, Kevlar, Sandwich Materials, CFRP & Aramid.</li>
<li>Uncoated polished carbide.</li>
<li>These routers are for contouring, grooving, drilling of a wide range of GFK, CFK. fibreglass reinforced plastics, as well as MMC (Metal Matrix Composites), ceramic with glass fiber, graphite, carbon etc.</li>
<li>BURR END CUT GEOMETRY.</li>
</ul>GBP00https://www.cutwel.co.uk/media/catalog/product/1/1/116002-uncoated-carbide-fibreglass-router-2.jpghttps://www.cutwel.co.uk/media/catalog/product/1/1/116002-uncoated-carbide-fibreglass-router-3.jpgadd-to-cart116002012
For Fibreglass, Kevlar, Sandwich Materials, CFRP & Aramid.
Uncoated polished carbide.
These routers are for contouring, grooving, drilling of a wide range of GFK, CFK. fibreglass reinforced plastics, as well as MMC (Metal Matrix Composites), ceramic with glass fiber, graphite, carbon etc.
Free Delivery on Orders Over £79 ex vat*
The BEST Technical Advice in the Industry
