The 29.1752 series from Karnasch is an NHC700 coated carbide 8 flute rougher finisher with drawing cut geometry. These are ideal for machining carbon fibre, glass reinforced plastics, honeycomb, aluminium and abrasive engineered plastics. Diameters range from 4-20mm and all come with a plain shank.
N
Carbon Steel ~ HB 225
Alloy Steels HB225-325
Pre-Hardened Steel HRc30~40
Hardened Steels HRc-40-45
Hardened Steels HRc-45-55
High Hardened Steels HRc55-70
Stainless Steel
Titanium
HRSA's (Heat Resistant Super Alloys)
Cast Iron
Copper
Aluminium
Graphite
Plastic
Composites
ExcellentGood
GBP
product
https://www.cutwel.co.uk/6mm-8-flute-nhc-coated-carbide-drawing-cut-rougher-finisher-291752-karnasch-29175206002057086mm 8 Flute NHC Coated Carbide Drawing Cut Rougher Finisher - 29.1752 (Karnasch)https://www.cutwel.co.uk/media/catalog/product/2/9/291752-coated-carbide-rougher-finisher-1.jpg92.9492.940000GBPInStock/Milling Tools/Milling Cutters/Non-Ferrous Milling Cutters/Composite Machining Milling CuttersThe 29.1752 series from Karnasch is an NHC700 coated carbide 8 flute rougher finisher with drawing cut geometry. These are ideal for machining carbon fibre, glass reinforced plastics, honeycomb, aluminium and abrasive engineered plastics. Diameters range from 4-20mm and all come with a plain shank. <li>For Carbon Fibre, Glass Reinforced Plastics, Honeycomb, Aluminium & Abrasive Engineered Plastics.</li>
<li>NHC700 coated carbide.</li>
<li>8 flutes, suitable for roughing and finishing.</li>
<li>DRAWING CUT GEOMETRY.</li>GBP00https://www.cutwel.co.uk/media/catalog/product/2/9/291752-coated-carbide-rougher-finisher-2.jpghttps://www.cutwel.co.uk/media/catalog/product/2/9/291752-coated-carbide-rougher-finisher-3.jpghttps://www.cutwel.co.uk/media/catalog/product/2/9/291752-coated-carbide-rougher-finisher-4.jpgadd-to-cart291752060020