8mm x 0.2mm 4 Flute Diamond Coated Carbide Corner Radius End Mill - GUF39 (YG-1)
(GUF39080)
Performance
£142.18£118.48
The GUF39 series from YG-1 is a diamond coated carbide corner radius end mill. Diameters range from 6-12mm and this comes with a 15° helix. These are suitable for use on For Carbon Fibre, Glass Reinforced Plastics, Kevlar, Aramid & Highly Abrasive Engineered Plastics.
N
Carbon Steel ~ HB 225
Alloy Steels HB225-325
Pre-Hardened Steel HRc30~40
Hardened Steels HRc-40-45
Hardened Steels HRc-45-55
High Hardened Steels HRc55-70
Stainless Steel
Titanium
HRSA's (Heat Resistant Super Alloys)
Cast Iron
Copper
Aluminium
Graphite
Plastic
Composites
ExcellentGood
GBP
product
https://www.cutwel.co.uk/8mm-4-flute-diamond-coated-carbide-corner-radius-end-mill-guf39-yg-1-guf3908056208mm x 0.2mm 4 Flute Diamond Coated Carbide Corner Radius End Mill - GUF39 (YG-1)https://www.cutwel.co.uk/media/catalog/product/g/u/guf39-diamond-coated-carbide-end-mill-1.jpg118.48118.480000GBPInStock/Milling Tools/Milling Cutters/Non-Ferrous Milling Cutters/Composite Machining Milling CuttersThe GUF39 series from YG-1 is a diamond coated carbide corner radius end mill. Diameters range from 6-12mm and this comes with a 15° helix. These are suitable for use on For Carbon Fibre, Glass Reinforced Plastics, Kevlar, Aramid & Highly Abrasive Engineered Plastics. <li>For Carbon Fibre, Glass Reinforced Plastics, Kevlar, Aramid & Highly Abrasive Engineered Plastics.</li>
<li>Diamond Coated Carbide is highly effective for machining most composite materials, ideal where tool cost is import or a special geometry is required.</li>
<li>15° helix provides high swarf evacuation.</li>
<li>Corner radius protects the cutting edge.</li>GBP00https://www.cutwel.co.uk/media/catalog/product/g/u/guf39-diamond-coated-carbide-end-mill-2.jpghttps://www.cutwel.co.uk/media/catalog/product/g/u/guf39-diamond-coated-carbide-end-mill-3.jpgadd-to-cartGUF39080