CRX-S Milling Cutters
For high speed machining of copper, wrought aluminium, high silicon aluminium, abrasive plastics, soft graphite, carbon fibre and glass fibre.
High performance diamond coated milling cutters for graphite machining
- For the ultra high performance machining of graphite
- Also excellent for wrought aluminium, bakelite, plastics, wood & brass
- Excellent surface finish due to the ultra fine film of the diamond coating
- High hardness and superior wear resistance increases tool life significantly
- Micro machining - available in diameters from as small as 0.2mm
- 2 Flute CRX-S DLC Coated Nanograin Carbide Ball Nose Slot Drill - SGED28 (YG-1)The SGED28 series CRX-S milling cutters range from 1-12mm diameter and have a plain shank. They give excellent performance machining on copper, copper alloys, soft graphites, wrought or abrasive alumi ... read more >Nanograin Carbide Substrate
Diamond-like Carbon coating with anti-adhesion properties
Up to 4 times the tool life of TiAlN coated tools
... read more >- N
- 2 Flute CRX-S DLC Coated Nanograin Carbide Long Neck Ball Nose Slot Drill - SGED27 (YG-1)The SGED27 series CRX-S milling cutters range from 0.5-12mm diameter and have a plain shank. They give excellent performance machining on copper, copper alloys, soft graphites, wrought or abrasive alu ... read more >Nanograin Carbide Substrate
Diamond-like Carbon coating with anti-adhesion properties
Up to 4 times the tool life of TiAlN coated tools
... read more >- N
- 2 Flute CRX-S DLC Coated Nanograin Carbide Corner Radius Reduced Neck Slot Drill - SGED29 (YG-1)The SGED29 series CRX-S milling cutters range from 1-12mm diameter and have a plain shank. They give excellent performance machining on copper, copper alloys, soft graphites, wrought or abrasive alumi ... read more >Nanograin Carbide Substrate
Diamond-like Carbon coating with anti-adhesion properties
Up to 4 times the tool life of TiAlN coated tools
... read more >- N
- 2 Flute CRX-S DLC Coated Nanograin Carbide Long Neck Slot Drill - SGED30 (YG-1)The SGED31 series CRX-S milling cutters range from 0.5-12mm diameter and have a plain shank. They give excellent performance machining on copper, copper alloys, soft graphites, wrought or abrasive alu ... read more >Nanograin Carbide Substrate
Diamond-like Carbon coating with anti-adhesion properties
Up to 4 times the tool life of TiAlN coated tools
... read more >- N
- 2 Flute CRX-S DLC Coated Nanograin Carbide Slot Drill - SGED31 (YG-1)The SGED31 series CRX-S milling cutters range from 1-12mm diameter and have a plain shank. They give excellent performance machining on copper, copper alloys, soft graphites, wrought or abrasive alumi ... read more >Nanograin Carbide Substrate
Diamond-like Carbon coating with anti-adhesion properties
Up to 4 times the tool life of TiAlN coated tools
... read more >- N