Between 23/11/20 - 3/1/21, our main carrier DPD will be suspending premium delivery services. Pre 10.30am and 12pm deliveries will not be available during this time. We are sorry for any inconvenience. Read full statement here
  • Free Delivery on Orders Over £75 ex vat*
    *View Terms & Conditions

  • The BEST Technical Advice in the Industry
    Call Our Tech Team on 01924 869 615

D-Power Milling Cutters

Diamond coated carbide milling cutters, for high speed machining of graphite or abrasive non-ferrous materials.

D-Power Milling Cutters

Diamond coated carbide milling cutters, for high speed machining of graphite or abrasive non-ferrous materials.

High performance diamond coated milling cutters for graphite machining

 

  • For the ultra high performance machining of graphite
  • Also excellent for wrought aluminium, bakelite, plastics, wood & brass
  • Excellent surface finish due to the ultra fine film of the diamond coating
  • High hardness and superior wear resistance increases tool life significantly
  • Micro machining - available in diameters from as small as 0.2mm

13 Items

Set Descending Direction
  1. 3 Flute D-Power Diamond Coated Carbide Corner Radius 40° Helix Standard Length End Mill - EIA13 (YG-1)
    3 Flute D-Power Diamond Coated Carbide Corner Radius 40° Helix Standard Length End Mill - EIA13 (YG-1)
    The YG-1 EIA13 series D-Power diamond coated micrograin carbide cutters have 3 flutes and a plain shank. These end mills have a 40° helix and corner radius for increased wear resistance. These range ... read more >
    First choice for high performance machining of graphite with extreme wear resistance.
    Excellent performance in abrasive non-ferrous materials. ... read more >
    • N

    Starting at £23.74 £19.78

    View Products
    • D1 - 2 - 12
    • D2 - 3 - 12
    • L1 - 6 - 25
    • L2 - 40 - 75
    EIA13
  2. 4 Flute D-Power Diamond Coated Carbide Corner Radius Reduced Neck End Mill - EIB88 (YG-1)
    4 Flute D-Power Diamond Coated Carbide Corner Radius Reduced Neck End Mill - EIB88 (YG-1)
    The YG-1 EIB88 series D-Power diamond coated micrograin carbide cutters has 4 flutes and a plain shank. These end mills have a reduced neck and corner radius for increased wear resistance. These range ... read more >
    First choice for high performance machining of graphite with extreme wear resistance.
    Excellent performance in abrasive non-ferrous materials. ... read more >
    • N

    Starting at £56.87 £47.39

    View Products
    • D1 - 6 - 12
    • D2 - 6 - 12
    • L1 - 10 - 25
    • L2 - 75 - 125
    EIB88
  3. 2 Flute D-Power Diamond Coated Carbide Minature Ball Nose Reduced Neck Slot Drill - EI997 (YG-1)
    2 Flute D-Power Diamond Coated Carbide Minature Ball Nose Reduced Neck Slot Drill - EI997 (YG-1)
    The YG-1 EI997 series D-Power diamond coated micrograin carbide cutters has 2 flutes and a plain shank. These minature slot drills have a reduced neck and a ball nosed end for machining radii. These r ... read more >
    First choice for high performance machining of graphite with extreme wear resistance.
    Excellent performance in abrasive non-ferrous materials. ... read more >
    • N

    Starting at £22.61 £18.84

    View Products
    • D1 - 0.2 - 6
    • D2 - 3 - 6
    • L1 - 0.2 - 6
    • L2 - 40 - 100
    EI997
  4. 3 Flute D-Power Diamond Coated Carbide Corner Radius 40° Helix Long Length End Mill - EIA14 (YG-1)
    3 Flute D-Power Diamond Coated Carbide Corner Radius 40° Helix Long Length End Mill - EIA14 (YG-1)
    The YG-1 EIA14 series D-Power diamond coated micrograin carbide cutters have 3 flutes and a plain shank. These end mills have a 40° helix and corner radius for increased wear resistance. These range ... read more >
    First choice for high performance machining of graphite with extreme wear resistance.
    Excellent performance in abrasive non-ferrous materials. ... read more >
    • N

    Starting at £38.87 £32.39

    View Products
    • D1 - 2 - 12
    • D2 - 3 - 12
    • L1 - 9 - 45
    • L2 - 60 - 100
    EIA14
  5. 2 Flute D-Power Diamond Coated Carbide Corner Radius Reduced Neck Slot Drill - EI996 (YG-1)
    2 Flute D-Power Diamond Coated Carbide Corner Radius Reduced Neck Slot Drill - EI996 (YG-1)
    The YG-1 EI996 series D-Power diamond coated micrograin carbide cutters has 2 flutes and a plain shank. These slot drills have a reduced neck and corner radius for increased wear resistance. These ran ... read more >
    First choice for high performance machining of graphite with extreme wear resistance.
    Excellent performance in abrasive non-ferrous materials. ... read more >
    • N

    Starting at £19.48 £16.23

    View Products
    • D1 - 0.2 - 6
    • D2 - 3 - 6
    • L1 - 0.3 - 6
    • L2 - 40 - 100
    EI996
  6. 2 Flute D-Power Diamond Coated Carbide Reduced Neck Slot Drill - EIB04 (YG-1)
    2 Flute D-Power Diamond Coated Carbide Reduced Neck Slot Drill - EIB04 (YG-1)
    The YG-1 EIB04 series D-Power diamond coated micrograin carbide cutters has 2 flutes and a plain shank. These slot drills have a reduced neck and range in diameter from 0.5mm-12mm. The D-Power range i ... read more >
    First choice for high performance machining of graphite with extreme wear resistance.
    Excellent performance in abrasive non-ferrous materials. ... read more >
    • N

    Starting at £25.13 £20.94

    View Products
    • D1 - 0.5 - 12
    • D2 - 3 - 12
    • L1 - 1 - 55
    • L2 - 40 - 150
    EIB04
  7. 2 Flute D-Power Diamond Coated Carbide Minature Ball Nose Reduced Neck Slot Drill - EIB93 (YG-1)
    2 Flute D-Power Diamond Coated Carbide Minature Ball Nose Reduced Neck Slot Drill - EIB93 (YG-1)
    The YG-1 EIB93 series D-Power diamond coated micrograin carbide cutters has 2 flutes and a plain shank. These minature slot drills have a reduced neck and a ball nosed end for machining radii. These r ... read more >
    First choice for high performance machining of graphite with extreme wear resistance.
    Excellent performance in abrasive non-ferrous materials. ... read more >
    • N

    Starting at £28.43 £23.69

    View Products
    • D1 - 0.4 - 4
    • D2 - 4 - 4
    • L1 - 0.6 - 6
    • L2 - 45 - 60
    EIB93
  8. 2 Flute D-Power Diamond Coated Carbide Ball Nose Tapered Neck Slot Drill - EIB87 (YG-1)
    2 Flute D-Power Diamond Coated Carbide Ball Nose Tapered Neck Slot Drill - EIB87 (YG-1)
    The YG-1 EIB87 series D-Power diamond coated micrograin carbide cutters has 2 flutes and a plain shank. These minature slot drills have a reduced neck and a ball nosed end for machining radii. These r ... read more >
    First choice for high performance machining of graphite with extreme wear resistance.
    Excellent performance in abrasive non-ferrous materials. ... read more >
    • N

    Starting at £19.58 £16.32

    View Products
    • D1 - 1 - 2
    • D2 - 3 - 4
    • L1 - 2 - 4
    • L2 - 40 - 100
    EIB87
  9. 2 Flute D-Power Diamond Coated Carbide Corner Radius Tapered Neck Slot Drill - EIB86 (YG-1)
    2 Flute D-Power Diamond Coated Carbide Corner Radius Tapered Neck Slot Drill - EIB86 (YG-1)
    The YG-1 EI996 series D-Power diamond coated micrograin carbide cutters has 2 flutes and a plain shank. These slot drills have a tapered neck and corner radius for increased wear resistance. These ran ... read more >
    First choice for high performance machining of graphite with extreme wear resistance.
    Excellent performance in abrasive non-ferrous materials. ... read more >
    • N

    Starting at £40.27 £33.56

    View Products
    • D1 - 1 - 2
    • D2 - 3 - 4
    • L1 - 2 - 4
    • L2 - 60 - 100
    EIB86
  10. 3 Flute D-Power Diamond Coated Carbide Ball Nose Reduced Neck End Mill - EI881 (YG-1)
    3 Flute D-Power Diamond Coated Carbide Ball Nose Reduced Neck End Mill - EI881 (YG-1)
    The YG-1 EIB87 series D-Power diamond coated micrograin carbide cutters has 2 flutes and a plain shank. These minature slot drills have a reduced neck and a ball nosed end for machining radii. These r ... read more >
    First choice for high performance machining of graphite with extreme wear resistance.
    Excellent performance in abrasive non-ferrous materials. ... read more >
    • N

    Starting at £40.15 £33.46

    View Products
    • D1 - 2 - 12
    • D2 - 6 - 12
    • L1 - 3 - 18
    • L2 - 60 - 90
    EI881
  11. 2 Flute D-Power Diamond Coated Carbide Short Length Ball Nose Reduced Neck End Mill - EI880 (YG-1)
    2 Flute D-Power Diamond Coated Carbide Short Length Ball Nose Reduced Neck End Mill - EI880 (YG-1)
    The YG-1 EI880 series D-Power diamond coated micrograin carbide cutters has 2 flutes and a plain shank. These short length end mills have a reduced neck and a ball nosed end for machining radii. These ... read more >
    First choice for high performance machining of graphite with extreme wear resistance.
    Excellent performance in abrasive non-ferrous materials. ... read more >
    • N

    Starting at £40.15 £33.46

    View Products
    • D1 - 2 - 12
    • D2 - 6 - 12
    • L1 - 3 - 18
    • L2 - 60 - 90
    EI880
  12. 2 Flute D-Power Diamond Coated Carbide Long Length Ball Nose Reduced Neck Slot Drill - EI451 (YG-1)
    2 Flute D-Power Diamond Coated Carbide Long Length Ball Nose Reduced Neck Slot Drill - EI451 (YG-1)
    The YG-1 EI451 series D-Power diamond coated micrograin carbide cutters has 2 flutes and a plain shank. These long length slot drills have a reduced neck and a ball nosed end for machining radii. Thes ... read more >
    First choice for high performance machining of graphite with extreme wear resistance.
    Excellent performance in abrasive non-ferrous materials. ... read more >
    • N

    Starting at £33.29 £27.74

    View Products
    • D1 - 2 - 12
    • D2 - 4 - 12
    • L1 - 10 - 55
    • L2 - 80 - 130
    EI451
  13. 2 Flute D-Power Diamond Coated Carbide Extra-Long Length Ball Nose Reduced Neck Slot Drill - EI450 (YG-1)
    2 Flute D-Power Diamond Coated Carbide Extra-Long Length Ball Nose Reduced Neck Slot Drill - EI450 (YG-1)
    The YG-1 EI450 series D-Power diamond coated micrograin carbide cutters has 2 flutes and a plain shank. These long length slot drills have a reduced neck and a ball nosed end for machining radii. Thes ... read more >
    First choice for high performance machining of graphite with extreme wear resistance.
    Excellent performance in abrasive non-ferrous materials. ... read more >
    • N

    Starting at £50.48 £42.07

    View Products
    • D1 - 4 - 12
    • D2 - 4 - 12
    • L1 - 20 - 55
    • L2 - 100 - 200
    EI450

13 Items

Set Descending Direction