V7 Mill Inox | UK Milling Tools Supplier | Cutwel Ltd
Call Us Now:
01924 869660

Tooling Supplier

for the UK & Ireland

Monday-Thursday 8am-6pm
& Friday 8am-5.30pm
Cutwel is still open for business! We have taken the necessary precautions following government advice, including extra protection for our warehouse staff who are working hard on site to dispatch all orders as normal. The majority of our office staff are now working from home but available to take your calls and emails for orders/enquires.


V7 Mill Variable Helix - Inox

Variable Helix Milling Cutters for Excellent Performance and Tool Life on Steel and Stainless Steel 

  • V7 Steel for unbeatable performance on Steel <40HRc (carbon, alloy and pre-hardened)
  • V7 INOX for unbeatable performance on Stainless Steels, Titanium and Inconel
  • High feeds - 2-4 times the feed rate of normal carbide milling cutters in large depths of cut
  • Variable helix geometry for chatter free machining (eliminating vibration)
  • Excellent surface finish

Most milling machines are limited to 8,000 or 12,000rpm, meaning high speed milling isn't possible.  Generally, most people use general purpose coated carbide or use high performance coated carbide but not at its full potential.  The answer to this is HIGH FEED milling cutters with a VARIABLE HELIX carbide milling cutter like the V7 Mill.

V7 Mill variable helix milling cutters have a special geometry that allows you to take twice the depth of cut of a normal carbide milling cutter with 2-3 times the feed rate, with a low cutting load and vibration free milling.  Tool life compared to normal coated carbide can increased by 300-400%.  Suitable for all steels up to HRc45, V7 Mills enable you to produce metal removal rates normally reserved for high speed cutters but at low to medium RPM's (below 8,000rpm).  Variable helix cutters are also mostly 4 flute and can be used for slotting, plunging, ramping, profiling, shoulder milling and copy milling.  Buy today and test the performance improvements.