Call Us Now:
01924 869660
Currency:

Tooling Supplier

for the UK & Ireland

Monday-Friday 8am-6pm

HPH Multi 3° Chucks

The revolutionary HPH MULTI 3o ultra slim chuck eliminates the need to invest in shrink fit machines. By using additive manufacturing, WTE have produced a chuck as slim as a shrink chuck with higher clamping forces. The tool can be changed on a HPH chuck whilst still in the machine with a simple T-Wrench.

Shrink Fit Slim 3° Profile .... HYDRAULIC Clamping - Made In Germany

Shop By Taper
Shop Accessories

BT MAS

DIN69871

HSK
(A/E)
Sleeves
  • High clamping forces than equivalent shrink chucks
  • 3° contour, 3mm wall thickness
  • Up to 200mm gauge length
  • Suitable for clamping plain, weldon & whistle notch shanks
  • Operating temperature range up to 120 °C
  • Balanced to 25,000RPM G2.5 (40,000RPM on request)
  • Run-out <0.003mm (3μm)

 

Due to the damping effect of the hydraulic fluid, the HPH Multi 3 Degree chuck can offer improved tool life, surface roughness and cycle times compared to similar geometry shrink chucks. With the simple side clamping screw, tool length is quick and easy to set.

3° Taper for a Tool Holder as slim as a Shrink Fit Chuck

Thermal stability up to 120°C

Optimal radial run-out <3μm

Quick & Easy Tool Change

Flexible clamping range using reduction sleeves
Shop Now...

Downloads

KKB Coolant Bore Sleeves for HPH Chucks
Coolant Direct To The Cutting Edge
Standard Sleeves For HPH Chucks
Extreme Quality

Any WTE HPH or Hydraulic chucks can use KKB Coolant Bore sleeves so that coolant can be directed to the cutting edge from the end of the sleeves.

- Significantly better tool life in milling heat resistant metals

- Improved chip control

- Available in 12, 20 & 32mm outside diameter

- For clamping 3-25mm diameter tools

- Suitable for clamping plain, weldon & whistle notch shanks

Any WTE HPH or Hydraulic chucks can use the same WTE reduction sleeves. The sleeves are ground with exceptionally high quality surface roughness for perfect fit and repeatability with the chuck.

- Available in 12, 20 & 32mm outside diameter

- For clamping 3-25mm diameter tools

- Suitable for clamping plain, weldon & whistle notch shanks

Shop Now...
Shop Now...