Showing 1-25 of 1456
- 4 Inch Soft Jaws (60° Pitch) with 8mm Keyway for Kitagawa Style Power Chucks (Cutwel Pro)These 4" Cutwel Pro Soft Jaws (with 15mm hole centres and 8mm keyway) are for use with Kitagawa, Chandox and Samchully Power Chucks. Supplied in a set of 3, these come with a 60 degree pitch and 1.5mm ... read more >Set of 4" Soft Jaws
15mm Hole Centre / 8mm Keyway
Suitable for use with Kitagawa, Chandox and Samchully power chucks
... read more >
Starting at £17.45 £14.54
- ER32 Square Collet Block - (Cutwel Pro)This square collet block helps improve set up times when holding small diameter work pieces on your machining centre. Can be held vertically or horizontal and takes standard ER32 collets. ... read more >
Improves set up times when holding small diameter work pieces.
Clamping diameters from 2-20mm.
Takes standa ... read more >
Starting at £33.15 £33.15
- Mechanical Chip Fan - (Cutwel Pro)The Cutwel chip fan is a perfect solution for safely cleaning the swarf and coolant from your machine table/workpiece before removing it from your machine. ... read more >
Spins in a standard ER Collet holder.
Creates high power forces to dispell coolant and swarf from workpiece.
Much safer than a conv ... read more >
Starting at £83.95 £83.95
- 66 Piece Modular CMM Fixture Kit (Cutwel Pro)The 66 Piece Kit contains everything you will need to hold and clamp any component. It’s a great starter kit to build your CMM effectiveness and start to see the productivity improvement’s. All Cu ... read more >
4x 15mm Support Rest (A1-10-15)
4x 30mm Support Rest (A1-10-12)
4x 50mm Support Rest (A1-10-02)
4x 100mm Support Rest (A1-10- ... read more >
Starting at £791.28 £659.40
- BT30 End Mill Holder 15,000RPM G6.3 (Cutwel Pro)Cutwel Pro End Mil Holder (Side Lock Arbor) with a BT30 connection. These are designed for use with tools that have a weldon (flat shank), therefore they provide better rigidity than ER collet chucks ... read more >BT30 End Mill Holder (Side Lock Arbors)
Balanced to 15,000RPM G6.3
Excellent rigidity compared to ER Collet Chucks
For use with tool ... read more >
Starting at £41.08 £34.23
- DDNN - Top Clamp 63 Deg PSC Capto Compatible Turning Tool for DN** Inserts (Canela)Profiling toolholder equipped with rhombic negative double-sided insert (angle 55 Degree). The PSC Capto Compatible system is a rigid and modular tool holding system which uses the PSC connector type. ... read more >Capto Compatible connection.
Starting at £151.43 £126.19
- T-Slot Scraper - 1950 Series (ER-EL)T-slot cleaner to make cleaning T-slots easy and allow free movement of T-nuts or tenons. Made from Steel with plastic handleMake cleaning T-slots easy
Allow free movement of T-nuts or tenons
Made from Steel with plastic handle
Starting at £4.70 £3.92
- Sliding Combined Top Clamp (ER-EL)Sliding Combined Top Clamp, Slim line design with various height range options up to 0-65mm. ER-EL sliding clamps are ideal for clamping irregular sized work pieces or large components that will not b ... read more >
Various height ranges up to 65mm
16/18mm wide table slot clamps available
Starting at £119.34 £99.45
- 90° Sharp Point Carbide Engraving Tool - ETSC90 (Cutwel Pro)The ETSC90 series carbide engraving tool from Cutwel have a 90° point angle and range from 3-12mm in diameter. These 1 flute tools have a sharp point are ideal for engraving on all materials. ... read more >Made from Micrograin Solid Carbide
90° Chamfer Angle
Suitable for all types of materials ... read more >
Starting at £19.42 £16.18
- QCGT Multi-Turn Drilling, Boring and Turning Holders (Teknik)Save space in your turret & reduce stock keeping costs – only 1 tool needed for 4 applications! The Teknik Multiturn system is for Drilling, Boring, Face Turning and Outside Diameter turning - all w ... read more >
Ideal for small turrets with limited stations.
Drill, bore, face turn and OD turn with j ... read more >
Starting at £60.78 £50.65
- Cylindrical Uncoated Cross Cut Carbide Rotary Burr -without End Cut (Karnasch)This solid carbide rotary burr has a Cylindrical shape, is Uncoated, has a ZYA shape and is without end cut. Karnasch HP-3-CUT rotary burrs have a cross-cut geometry (the most widely used universal cu ... read more >
Cylindrical ZYA shaped head.
Cross cut geometry.
Without end cut.
Solid carbide for increased wear resistance and tool life.< ... read more >
Starting at £6.44 £5.37
- ART.230B Soft Jaw Plates for Gerardi Standard Series Flex ViceSoft (machinable) quick hand change jaw plates for Gerardi Standard FLEX vices. The jaws feature an innovative comb system allowing them to be positioned or removed from the vice in a couple of second ... read more >
Soft Jaw (Quick Change)
COMPATIBLE WITH THE FOLLOWING GERARDI VICES:
ART1A, ART1AZ, ART20A, ART30A. For further ... read more >
Starting at £76.25 £63.54
- ER11 Evolution Line 90 Degree 10,000RPM Angle Head - FS90-7 Series (Gerardi)The FS90-7 series Gerardi Angle Head is part of the Evolution Line which has a modular shank design so they can be used across multiple milling machines. This model is made from Steel housing, has an ... read more >
Evolution Line: modular shanks, can be used across multiple milling machines. The most powerful Gerardi design.
ER11 output (max 7mm shan ... read more >
Starting at £4,620.29 £3,850.24
- Metric Coarse HSS Hand Tap Set - 00M (UFS)The UFS 00M series HSS Metric Coarse Hand Tap set includes First, Second and Bottom hand taps. These come uncoated for general purpose use on steel stianless steel, cast iron and non-ferrous materials ... read more >Metric Coarse Thread Form
Hand Tap Set (First, Second & Bottom Taps)
Made from HSS
Uncoated (Bright Finish)
General purpose us ... read more >
Starting at £27.60 £23.00
- BSP(G) HSS 5% Cobalt Spiral Flute Universal Machine Tap - E61G Series (UFS)The UFS E61G series BSP(G) HSS 5% Cobalt Universal Machine Taps are ideal for general purpose machine tapping of a wide range of materials including: Steel, Copper, Brass, Bronze & Aluminium. The brig ... read more >BSP(G) Universal Machine Tap
HSS 5% Cobalt Substrate
For General Purpose Tapping of Steel, Copper, Brass Bronze & Aluminium
Bright f ... read more >
Starting at £17.18 £14.32
- Parting Blade for KGMN400 4mm Parting Inserts - SPB4-T Series (Teknik)Teknik parting off blade, available in 26mm or 32mm height. Suitable for KGMN400 4mm parting inserts. Teknik parting blades are suitable for use with Korloy, Cutwel Pro or other manufacturers parting ... read more >
For use with KGMN400 KGT parting off inserts.
Either 26mm or 32mm centre height.
For use with either Korloy Sawman or Cutwel Pro pa ... read more >
Starting at £44.51 £37.09
- Gold-P TiN Coated Eco Jobber Drill - D1GP165 (YG-1)The D1GP165 series eco Gold-P jobber drills offer great value for economical general drilling applications. These TiN coated drills reduce cost and increase tool life compared to standard uncoated HSS ... read more >
TiN Coating on working area reduces cost and increases tool life compared to standard uncoated HSS drills
General purpose drill for Steel ... read more >
Starting at £0.78 £0.65
- 2 Flute 45 Degree Helix Uncoated Solid Carbide Aluminium Geometry Slot Drill - AM252 Series (Mammut)The Mammut AM252 series uncoated carbide 45 Degree helix cutter has 2 flutes and a plain shank. These slot drills range in diameter from 1mm-20mm. These polished high helix milling cutters are ideal f ... read more >
Uncoated polished solid carbide
Polished high helix milling cutter for general aluminium and plastic machining ... read more >
Starting at £2.39 £1.99
- D1 - 1 - 20
- D2 - 3 - 20
- L1 - 3 - 40
- L2 - 50 - 100
- 10-80 Degree Adjustable Chamfer Mill - AH Series (Teknik)The AH series adjustable indexable chamfer mills from Teknik has an min/max machining diameter between 5mm and either 27mm or 34mm and a length of 100mm. These 1 tooth chamfer mills are adjustable bet ... read more >
Min/max machining diameter between 5mm and either 27mm or 34mm and a length of 100mm.
Adjustable between 10-80 degree
Takes TCMT st ... read more >
Starting at £83.18 £69.32
- 90° Uncoated HSS-XE Countersink Set - 20164-UNCOAT Series (Karnasch)The Karnasch 20164 series 3 flute 90 degree countersink sets are made from HSS-XE and are suitable for general machining of Steel, Non Ferrous and Cast Iron. These have a self centering geometry for l ... read more >
HSS-XE Substrate (HIgh Speed Steel with added Cobalt Substrate for increased tool life/wear resistance)
For General Machining of Steel, N ... read more >
Starting at £61.92 £51.60
- TiAIN Coated Carbide Jobber Dream Drill - DH424 Series (YG-1)The YG-1 DH424 General Carbide Dream Drills are a jobber length drill designed for high performance drilling of Steel up to HRc45 and Cast Iron. These self centering drills can drill to a h7 tolerance ... read more >
Micrograin Carbide Substrate
TiAlN Coated High Performance Drill
5xD Stub Length
Self Centering with 140 degree Drill Point ... read more >
Starting at £19.60 £16.33
- Microscope Coated Carbide Threading Insert - ALIH Series (Cutwel Pro)These Microscope internal threading inserts range in diameter from 2.4mm to 11.4mm with pitches from 0.5mm to 2mm. The Korloy Microscope system can be clamped either directly into the machine or by a ... read more >
Solid carbide TiAlN coated inserts.
Ideal for internal threading applications.
Threading diameter from 2.4mm to 11.4mm
For Mi ... read more >
Starting at £22.88 £19.07
- KGT Face Grooving Tool Holder - KGT-TEKNIK-F Series (Teknik)The KGT-TEKNIK-F series holders are suitable for face grooving applications. These holders are for insert widths of 2-4mm with T-Max from 3-4.8mm. Teknik KGT holders feature a 4 point clamping system ... read more >
Strong 4 point clamping minimises vibration and reduces risk of tool failure.
Wide selection of chip breakers ensures best performance in ... read more >
Starting at £44.51 £37.09