- Pro-X Mill 90° Face Mill for XEKT Inserts - PAXCM (Korloy)The Pro-X Mill PAXCM series from Korloy is a 90 degree is a face mill style milling body and takes XEKT inserts and is ideal for high speed machining. Diameters range from 40-125mm and these are suita ... read more >90 degree approach anglel
Ultra high speed aluminium machining
Exceptional swarf control
large depth of cut ... read more >- N
- APMT 90° End Mill - APMT-EM (Teknik)The Teknik APMT 90 degree end mill style milling body takes APMT11T3/1604 ISO inserts. Diameters range from 16-32mm and these are suitable for face milling, shoulder milling, slotting, ramping and hel ... read more >
End Mill Style.
Economical 90°, square shoulder milling with ISO inserts.
High rake angle provides low cutting resistance and s ... read more >- P
- M
- K
- S
- N
- R390 90° Face Mill - R390-FM (Teknik)The Teknik R390 90 degree face mill style milling body takes R39011T3/1704/1806 inserts. Diameters range from 40-160mm. The inserts and holders are fully interchangeable with all other manufacturers h ... read more >
Economy type face mill makes it perfect for low cost general machining.
For 90 Degree Milling.
Suitable for use with R39011T3/1704/ ... read more >- P
- M
- K
- S
- N
- R390 90° End Mill - R390-EM (Teknik)The Teknik R390 90 degree end mill style milling body takes R39011T3/1704/1806 inserts. Diameters range from 16-32mm. The inserts and holders are fully interchangeable with all other manufacturers hol ... read more >
Economy type end mill makes it perfect for low cost general machining.
For 90 Degree Milling.
Suitable for use with R39011T3/1704/1 ... read more >- P
- M
- K
- S
- N
- ONMU 45° Face Mill - ONMU-FM (Teknik)The Teknik ONMU 90 degree end mill style milling body takes ONMU0505 inserts. Diameters range from 63-160mm. The inserts and holders are fully interchangeable with all other manufacturers holders. ... read more >
Economy type face mill makes it perfect for low cost general machining.
For 45 Degree Milling.
Suitable for use with ONMU0505& ... read more >- P
- M
- K
- S
- N
- Pro-X Mill 90° End Mill for XEKT Inserts - PAXS (Korloy)The Pro-X Mill PAXS series from Korloy is a 90 degree is a end mill style milling body and takes XEKT inserts and is ideal for high speed machining. Diameters range from 20-40mm and these are suitable ... read more >90 degree approach anglel
Ultra high speed aluminium machining
Exceptional swarf control
large depth of cut ... read more >- N
- i-X Mill Steel Shank Holder for Ball Nose Inserts - ZBS Series (YG-1)The YG-1 ZBS series i-X Mill copy milling holder has a steel shank and takes both ball nose and corner radius inserts from 12mm to 33mm. This premium alloy steel holder has excellent strength, precise ... read more >
Premium Alloy Steel shank (low cost, excellent strength, precise h6 tolerance and is nickel plated to prevent corrosion).
Ideal for ... read more >- P
- H
- M
- K
- N
- i-X Mill Steel Shank Taper Neck Holder for Ball Nose Inserts - ZBT Series (YG-1)The YG-1 ZBT series i-X Mill copy milling holder has a steel shank, a tapered neck and takes both ball nose and corner radius inserts from 8mm to 33mm. This premium alloy steel holder has excellent st ... read more >
Premium Alloy Steel shank (low cost, excellent strength, precise h6 tolerance and is nickel plated to prevent corrosion).
Ideal for ... read more >- P
- H
- M
- K
- N
- ADKT 90° End Mill - ADKT-EM (Teknik)The Teknik ADKT 90 degree end mill style milling body takes ADKT1505 ISO inserts. Diameters range from 20-40mm and these are suitable for face milling, shoulder milling, slotting, ramping and helical ... read more >
Economy type end mill makes it perfect for low cost general machining.
For 90°, Milling.
Suitable for use with ADKT1505 style I ... read more >- P
- M
- K
- N
- RDMT/RDMW 90° Face Mill - RDMT-FM (Teknik)The Teknik RDMT/RDMW 90 degree face mill style milling body takes RDMT1003/12T3 or RDMW1003/12T3 ISO inserts. Diameters range from 40-100mm and these are suitable for face milling, shoulder milling, s ... read more >
Economy type end mill makes it perfect for low cost general machining.
For 90°, Milling.
Suitable for use with RDMT1003/12T3 or ... read more >- P
- M
- S
- K
- RDMT/RDMW 90° End Mill - RDMT-EM (Teknik)The Teknik RDMT/RDMW 90 degree end mill style milling body takes RDMT1003/12T3 or RDMW1003/12T3 ISO inserts. Diameters range from 20-40mm and these are suitable for face milling, shoulder milling, slo ... read more >
Economy type end mill makes it perfect for low cost general machining.
For 90°, Milling.
Suitable for use with RDMT1003/12T3 or ... read more >- P
- M
- S
- K
- RDMT/RDMW 90° Screwed Shank End Mill - RDMT-ST (Teknik)The Teknik RDMT/RDMW 90 degree screwed shank end mill style milling body takes RDMT1003/12T3 or RDMW1003/12T3 ISO inserts. Diameters range from 25-40mm and shanks from M12-M16, and these are suitable ... read more >
Economy type screwed shank end mill makes it perfect for low cost general machining.
For 90°, Milling.
Suitable for use with RD ... read more >- P
- M
- S
- K
- SPMG 90° End Mill - SPMG-EM (Teknik)The Teknik SPMG 90 degree end mill style milling body takes SPMG0602/07T3/0904 ISO inserts. Diameters range from 14-32mm and these are suitable for face milling, shoulder milling, slotting, ramping an ... read more >
Economy type end mill makes it perfect for low cost general machining.
For 90°, Milling.
Suitable for use with SPMG0602/07T3/09 ... read more >- P
- M
- K
- N
- TPKN 90° Face Mill - TPKN-FM (Teknik)The Teknik TPKN 90 degree face mill style milling body takes TPKN1603/2204 ISO inserts. Diameters range from 50-250mm and these are suitable for face milling, shoulder milling, slotting, ramping and h ... read more >
Economy type face mill makes it perfect for low cost general machining.
For 90°, Milling.
Suitable for use with TPKN1603 or TPK ... read more >- P
- M
- K
- N
- APKT 90° Face Mill - APKT-P (Teknik)The Teknik APKT 90 degree porcupine style milling body takes APKT1003/1604 ISO inserts. Diameters range from 50-250mm and these are suitable for face milling, shoulder milling, slotting, ramping and h ... read more >
Porcupine Mill Style.
Economical 90°, square shoulder milling with ISO inserts.
High rake angle provides low cutting resistance ... read more >- P
- M
- K
- S
- N
- ADMT 90° Face Mill - ADMT-FM (Teknik)The Smoxh ADMT 90 degree face mill style milling body takes ADMT1204/1604 inserts. Diameters range from 50-100mm. The inserts and holders are fully interchangeable with all other manufacturers holders ... read more >
Face Mill Style.
Economical 90°, face milling with ISO inserts.
High rake angle provides low cutting resistance and smooth chip ... read more >- P
- M
- K
- S
- N
- ADMT 90° End Mill - ADMT-EM (Teknik)The Smoxh ADMT 90 degree end mill style milling body takes ADMT1204/1604 inserts. Diameters range from 20-40mm. The inserts and holders are fully interchangeable with all other manufacturers holders. ... read more >
Face Mill Style.
Economical 90°, square shoulder milling with ISO inserts.
Insert grades for steel, stainless steel, cast iron ... read more >- P
- M
- K
- S
- N
- ANKX 90° End Mill - ANKX-EM (Teknik)The Smoxh ANKX 90 degree end mill style milling body takes ANKX12 inserts and has a 32mm diameter body. The inserts and holders are fully interchangeable with all other manufacturers holders. ... read more >
End Mill Style.
Economical 90°, square shoulder milling with ISO inserts.
Insert grades for steel, stainless steel, cast iron a ... read more >- P
- M
- K
- S
- N
- ANKX 90° Face Mill - ANKX-FM (Teknik)The Smoxh ANKX 90 degree face mill style milling body takes ANKX12/17 inserts. Diameters range from 50-125mm. The inserts and holders are fully interchangeable with all other manufacturers holders. ... read more >
Face Mill Style.
Economical 90°, face milling , with ISO inserts.
Insert grades for steel, stainless steel, cast iron and n ... read more >- P
- M
- K
- S
- N
- APKT 90° Screwed Shank End Mill - APKT-ST (Teknik)The Teknik APKT 90 degree screwed shank end mill style milling body takes APKT1003/1604 inserts. Diameters range from 16-40mm and thread sizes from M8-M16. The inserts and holders are fully interchang ... read more >
Screwed Shank End Mill Style.
Economical 90°, square shoulder milling with ISO inserts.
High rake angle provides low cutting re ... read more >- P
- M
- K
- S
- N
- 3PKT 90° Face Mill - 3PKT-FM (Teknik)The Teknik 3PKT 90 degree face mill style milling body takes 3PKT1505 inserts. Diameters range from 50-80mm. The inserts and holders are fully interchangeable with all other manufacturers holders. ... read more >
Economy type end mill makes it perfect for low cost general machining.
For 90°, Milling.
Suitable for use with 3PKT1505 style I ... read more >- P
- M
- K
- S
- N
- HNHX 90° Face Mill - HNHX-FM (Teknik)The Teknik HNHX 90 degree face mill style milling body takes HNHX1006 inserts. Diameters range from 63-160mm. The inserts and holders are fully interchangeable with all other manufacturers holders. ... read more >
Economy type , face mill makes it perfect for low cost general machining.
For 90°, Milling.
Suitable for use with HNHX1006 ... read more >- P
- M
- K
- S
- N
- LNGX 90° Face Mill - LNGX-FM (Teknik)The Teknik LNGX 90 degree face mill style milling body takes LNGX1307 inserts. Diameters range from 40-125mm. The inserts and holders are fully interchangeable with all other manufacturers holders. ... read more >
Economy type , face mill makes it perfect for low cost general machining.
For 90°, Milling.
Suitable for use with LNGX15T6 ... read more >- P
- M
- K
- S
- N
- LNGU 90° End Mill - LNGU-EM (Teknik)The Teknik LNGU 90 degree end mill style milling body takes LNGU15T6 inserts. Diameters range from 25-32mm. The inserts and holders are fully interchangeable with all other manufacturers holders. ... read more >
Economy type end mill makes it perfect for low cost general machining.
For 90°, Milling.
Suitable for use with LNGU15T6 style I ... read more >- P
- M
- K
- S
- N
- RCKT Button Insert Face Mill - RCKT-FM (Teknik)The Teknik RCKT button insert face mill style milling body takes RCKT1204 inserts. Diameters range from 50-100mm. The inserts and holders are fully interchangeable with all other manufacturers holders ... read more >
Economy type face , mill makes it perfect for low cost general machining.
Full radius milling using , button inserts.
Suita ... read more >- P
- M
- K
- S
- N
- XNEX 90° Face Mill - XNEX-FM (Teknik)The Teknik XNEX 90° face mill style milling body takes XNEX0806 inserts. Diameters range from 50-200mm. The inserts and holders are fully interchangeable with all other manufacturers holders. ... read more >
Economy type face , mill makes it perfect for low cost general machining.
For 90°, Milling.
Suitable for use with XNEX0806 ... read more >- P
- M
- K
- S
- N
- XOMX 90° Face Mill - XOMX-FM (Teknik)The Teknik XOMX 90° face mill style milling body takes XOMX1204/1806 inserts. Diameters range from 40-160mm. The inserts and holders are fully interchangeable with all other manufacturers holders. ... read more >
Economy type face , mill makes it perfect for low cost general machining.
For 90°, Milling.
Suitable for use with XOMX1204/ ... read more >- P
- M
- K
- S
- N
- WNMX 90° Face Mill - HRMD-FM (Smoxh)The Smoxh WNMX 90 degree face mill style milling body takes WNMX09T3 ISO inserts. Diameters range from 40-66mm and these are suitable for face milling, shoulder milling, slotting, ramping, helical cut ... read more >
Face Mill Style.
High feed , face milling with ISO inserts.
High rake angle provides low cutting resistance and smooth chip flo ... read more >- P
- M
- K
- S
- N
- WNMX 90° Face Mill - HRMD-EM (Smoxh)The Smoxh WNMX 90 degree end mill style milling body takes WNMX09T3 ISO inserts. Diameters range from 25-40mm and these are suitable for face milling, shoulder milling, slotting, ramping, helical cutt ... read more >
End Mill Style.
High feed , face milling with ISO inserts.
High rake angle provides low cutting resistance and smooth chip flow ... read more >- P
- M
- K
- S
- N