ISO50 to 6023E Evolution Line Lightweight 90 Degree 8,000RPM Angle Head - FS90-3 Series (Gerardi)
(9.FS9.03000-ISO50EC)
Now£5,057.90£4,214.92Was£5,950.48
The FS90-3 series Gerardi Angle Head is part of the Evolution Line which has a modular shank design so they can be used across multiple milling machines. This model is made from Steel housing, has an 6023E output and can run at a maximum of 8,000RPM
GBP
product
https://www.cutwel.co.uk/iso50-to-6023e-evolution-line-lightweight-90-degree-8000rpm-angle-head-fs90-3-series-gerardi-59131714ISO50 to 6023E Evolution Line Lightweight 90 Degree 8,000RPM Angle Head - FS90-3 Series (Gerardi)https://www.cutwel.co.uk/media/catalog/product/6/0/6023e-evolution-line-90-degree-8000rpm-angle-head-fs90-3-series-gerardi-1_1.jpg4214.924958.730000GBPInStock/Tool Holding/Angle Heads for Milling Machines/Gerardi Angle Heads for Milling MachinesThe FS90-3 series Gerardi Angle Head is part of the Evolution Line which has a modular shank design so they can be used across multiple milling machines. This model is made from Steel housing, has an 6023E output and can run at a maximum of 8,000RPM <ul>
<li>Evolution Line: modular shanks, can be used across multiple milling machines. The most powerful Gerardi design.</li>
<li>6023E output </li>
<li>Treated steel body with internal air pressure providing maximum rigidity and corrosion resistance.</li>
<li>ATC - Automatic Tool Change (for reduced setup times)</li>
<li>Gleason ground gears</li>
<li>For general or high speed machining</li>
<li>Drill, tap or mill at different angles without multiple set ups</li>
<li>Increased machining capabilities</li>
<li>Quick and accurate alignment</li>
<li>Maximum performance and life expectancy</li>
<li>Available with selected BT, SK, HSK, ISO and PSC Polygonal tapers</li>
<li>Supplied with standard stop block</li>
<li>Direction of rotation opposite to machine spindle</li>
</ul>GBP00https://www.cutwel.co.uk/media/catalog/product/e/r/er11-evolution-90-degree-8000rpm-angle-head-fl90-7-series-gerardi-2.jpgadd-to-cart9.FS9.03000-ISO50EC
/Tool Holding/Angle Heads for Milling Machines/Gerardi Angle Heads for Milling Machines1354568Gerardi Angle Heads for Milling Machineshttps://www.cutwel.co.uk/tool-holding/angle-heads-for-milling-machines/gerardi-angle-heads-for-milling-machineshttps://www.cutwel.co.uk/media/catalog/category/gertol.jpg14
Free Delivery on Orders Over £75 ex vat*
The BEST Technical Advice in the Industry
