Call Us Now:
01924 869660
Currency:

Tooling Supplier

for the UK & Ireland

Monday-Friday 8am-6pm

Economy & Hi-Power Milling Chucks

Powerful Mechanical Clamping With Less Than 3 Microns Run-Out!

Shop By Taper

BT MAS

DIN69871

HSK
A

Shop Accessories

C-Spanners

BILZ Hi-Power Milling Chucks Reliable,

Powerful, Accurate

The BILZ HI-POWER milling chuck is a powerful and reliable tool holder just <3 microns run-out at 3xD tool length. The mechanical clamping mechanism and sealed unit ensures long and trouble free holder life without problems normally associated with shrink chucks or hydraulic chucks.

 

 

·         Balanced up to 15,000RPM G6.3

·         High clamping forces increase productivity and tool life

·         Performance roll-bearing clamping mechanism

·         High run out accuracy of <0.003mm at 3xD

·         Perfectly sealed clamping nuts and

·         Anti-rust coating prevent contamination

·         Low vibration for good surface finish

·         Clamping forces <900Nm

 

 

Milling chucks are high recommended for use with rippers, indexable end mills and for HPC milling due to the high clamping forces, low run-out and high rigidity.

Downloads

V7 INOX

V7 PLUS

TITANOX POWER

HRM DOUBLE

PRO-X MILL

Sleeves

Milling Chuck (Economy Type)
For Powerful High Torque Clamping

Economy milling chucks are an ideal solution for high metal removal applications. The bearing nut provides exceptional clamping force and torque, with high rigidity due to the large size of the holder.

• Balanced G6.3, 12,000RPM
• Run-out <0.01mm
• Available in 20 or 32mm bore sizes
• 20mm reduction sleeves available from 3-16mm
• 32mm reduction sleeves available from 6-25mm
• Powerful clamping due to special bearing nut

Milling Chuck Sets
Milling Chuck, Reduction Sleeves, Box & Wrench

Economy milling chucks set supplied with set of reduction sleeves, c-spanner and wooden box

• Balanced G6.3, 12,000RPM
• Run-out <0.01mm
• Available in 20 or 32mm bore sizes
• All 20mm sets supplied with 5 reduction sleeves: 6,8,10,12 & 16mm
• All 32mm sets supplied with 7 reduction sleeves: 10,12,14,16,18,20,25mm
• Sets supplied in wooden box with c-spanner

High Torque Economy Type Milling Chucks

Shop Now...
Shop Now...
PSC
(Polygonal)

DIN2080