Free Next Day Delivery
on orders over £59 ex vat*

Expert Technical Team
Get advice on 01924 869 615

Same Day Despatch
On orders placed up to 5.45pm

Hydraulic Chuck Sets

Filter By arrow
carrat-down

9 Items

Sort By
carrat-down
sort-descending

BT40 YG-1 POWER E-HYDRO Toolholders give up to 300% more tool life than ER Collet Chucks with up to 900Nm clamping force. Perfect surface finish is achieved with no chatter marks and minimum noise whi...

  • The Ultimate Hydraulic Toolholder For Milling, Drilling and Reaming
  • Up to 300% more tool life than ER Collet Chucks
  • Sleeves included: 1 x 6,8,10,12 &16mm
  • Up to 900Nm clamping force
  • Perfect surface finish – no chatter marks
  • Push feed rates up to 30% higher
  • Minimum noise
  • Change cutting tool in seconds with 3 micron repeatability
  • 3 micron run-out accuracy, balanced to 25,000RPM
  • Contains 20mm BT40 toolholder
  • Compact design
  • Suitable for through coolant tools

Size

Diameter (mm)20 - 20

From £397.86 £331.55

The HPH SK40 kit from WTE contains - 1 x 20mm SK40 HPH holder + 5 reduction sleeves (6, 8, 10, 12, 16mm). These chucks are balanced to 25,000RPM G2.5 and are the BEST holder for ultra high metal rem...

  • Kit contains - 1 x 20mm SK40 HPH holder + 5 reduction sleeves (6, 8, 10, 12, 16mm)
  • Short & Heavy Design for ultimate rigidity and to be used with sleeves
  • Standard Through Coolant Type
  • Balanced to 25,000RPM G2.5
  • Hydraulic Clamping with up to 40% better tool life than Shrink Fit Chucks
  • ULTRA High Metal Removal rates for extreme roughing to finishing
  • Clamping forces <890kN (higher than shrink chucks)
  • Reliable clamping temperatures up to 170°C
  • Optimal radial run-out accuracy of 3 microns with a projection length of 2.5xD
  • Damping properties enable better surface finish with longer tool life
  • Made by WTE - 100% Manufactured in Germany

Size

Diameter (mm)20 - 20

From £674.78 £562.32

The HPH BT40 kit from WTE contains - 1 x 20mm BT40 HPH holder + 5 reduction sleeves (6, 8, 10, 12, 16mm). These chucks are balanced to 25,000RPM G2.5 and are the BEST holder for ultra high metal remo...

  • Kit contains - 1 x 20mm BT40 HPH holder + 5 reduction sleeves (6, 8, 10, 12, 16mm)
  • Short & Heavy Design for ultimate rigidity and to be used with sleeves
  • Standard Through Coolant Type
  • Balanced to 25,000RPM G2.5
  • Hydraulic Clamping with up to 40% better tool life than Shrink Fit Chucks
  • ULTRA High Metal Removal rates for extreme roughing to finishing
  • Clamping forces <890kN (higher than shrink chucks)
  • Reliable clamping temperatures up to 170°C
  • Optimal radial run-out accuracy of 3 microns with a projection length of 2.5xD
  • Damping properties enable better surface finish with longer tool life
  • Made by WTE - 100% Manufactured in Germany

Size

Diameter (mm)20 - 20

From £674.78 £562.32

SK40 YG-1 POWER E-HYDRO Toolholders give up to 300% more tool life than ER Collet Chucks with up to 900Nm clamping force. Perfect surface finish is achieved with no chatter marks and minimum noice whi...

  • The Ultimate Hydraulic Toolholder For Milling, Drilling and Reaming
  • Up to 300% more tool life than ER Collet Chucks
  • Sleeves included: 1 x 6,8,10,12 &16mm
  • Up to 900Nm clamping force
  • Perfect surface finish – no chatter marks
  • Push feed rates up to 30% higher
  • Minimum noise
  • Change cutting tool in seconds with 3 micron repeatability
  • 3 micron run-out accuracy, balanced to 25,000RPM
  • Contains 20mm BT40 toolholder
  • Compact design
  • Suitable for through coolant tools

Size

Diameter (mm)20 - 20

From £397.86 £331.55

Schunk Tendo-E Compact Chucks are 100% made in Germany and offer market leading performance and the very best machining results. The TENDO E compact starter kit is a complete package consisting of a t...

  • The TENDO E compact starter kit
  • Includes 1x 20mm Tendo E-Compact Chuck, 5x Sleeves (6, 8, 10, 12 & 16mm), 1x Sleeve Remover & 1x Actuation Key.
  • Optionally, the interfaces HSK-A 63, SK 40, JIS-BT 30, BT-DC 30, JIS-BT 40, BT-DC 40, CAT 40 or SCHUNK CAPTO C 6 can be used.
  • The intermediate sleeves include the clamping diameters Ø 6, Ø 8, Ø 10, Ø 12, and Ø 16.

Size

Diameter (mm)20 - 20

From £484.64 £403.87