Free Next Day Delivery
on orders over £59 ex vat*

Expert Technical Team
Get advice on 01924 869 615

Same Day Despatch
On orders placed up to 5.45pm

SK (DIN69871) HPH Chucks

SK (DIN69871) HPH Chucks

WTE SK MAS HPH Chucks are balanced to 25,000RPM G2.5. They are the BEST holder for ultra high metal removal rates. With optimal radial run-out accuracy of 3 microns with projection length of 2.5xD.

Filter By arrow
carrat-down

4 Items

Sort By
carrat-down
sort-descending

SK40 WTE HPH Chucks are balanced to 25,000RPM G2.5 and are the BEST holder for ultra high metal removal rates, ideal for extreme roughing to fine finishing in all materials. These have a short & heavy...

  • Short & Heavy Design for ultimate rigidity and to be used with sleeves
  • Standard Through Coolant Type
  • Balanced to 25,000RPM G2.5
  • Hydraulic Clamping with up to 40% better tool life than Shrink Fit Chucks
  • ULTRA High Meta Removal rates for extreme rouhghing to finsih finishing
  • Clamping forces <890kN (higher than shrink chucks)
  • Reliable clamping temperatures up to 170°C
  • Optimal radial run-out accuracy of 3 microns with a projection length of 2.5xD
  • Damping properties enable better surface finish with longer tool life
  • Made by WTE - 100% Manufactured in Germany

From £280.78 £233.98

SK50 WTE HPH Chucks are balanced to 25,000RPM G2.5 and are the BEST holder for ultra high metal removal rates, ideal for extreme roughing to fine finishing in all materials. These have a short & heavy...

  • Short & Heavy Design for ultimate rigidity and to be used with sleeves
  • Standard Through Coolant Type
  • Balanced to 25,000RPM G2.5
  • Hydraulic Clamping with up to 40% better tool life than Shrink Fit Chucks
  • ULTRA High Meta Removal rates for extreme rouhghing to finsih finishing
  • Clamping forces <890kN (higher than shrink chucks)
  • Reliable clamping temperatures up to 170°C
  • Optimal radial run-out accuracy of 3 microns with a projection length of 2.5xD
  • Damping properties enable better surface finish with longer tool life
  • Made by WTE - 100% Manufactured in Germany

From £324.42 £270.35

SK40 WTE HPH Chucks are balanced to 25,000RPM G2.5 and are the BEST holder for ultra high metal removal rates, ideal for extreme roughing to fine finishing in all materials. These have a short & heavy...

  • Short & Heavy Design for ultimate rigidity and to be used with sleeves
  • Through Coolant with KKB Resealable Coolant Bores
  • Balanced to 25,000RPM G2.5
  • Hydraulic Clamping with up to 40% better tool life than Shrink Fit Chucks
  • ULTRA High Meta Removal rates for extreme rouhghing to finsih finishing
  • Clamping forces <890kN (higher than shrink chucks)
  • Reliable clamping temperatures up to 170°C
  • Optimal radial run-out accuracy of 3 microns with a projection length of 2.5xD
  • Damping properties enable better surface finish with longer tool life
  • Made by WTE - 100% Manufactured in Germany

From £318.64 £265.53

SK40 WTE HPH Chucks are balanced to 25,000RPM G2.5 and are the BEST holder for ultra high metal removal rates, ideal for extreme roughing to fine finishing in all materials. These have a short & narro...

  • Short & Narrow Design for ultimate rigidity and nominal diameter clamping
  • Standard Through Coolant Type
  • Balanced to 25,000RPM G2.5
  • Hydraulic Clamping with up to 40% better tool life than Shrink Fit Chucks
  • ULTRA High Meta Removal rates for extreme rouhghing to finsih finishing
  • Clamping forces <890kN (higher than shrink chucks)
  • Reliable clamping temperatures up to 170°C
  • Optimal radial run-out accuracy of 3 microns with a projection length of 2.5xD
  • Damping properties enable better surface finish with longer tool life
  • Made by WTE - 100% Manufactured in Germany

From £491.95 £409.96