SK40 YG-1 POWER E-HYDRO Toolholders give up to 300% more tool life than ER Collet Chucks with up to 900Nm clamping force. Perfect surface finish is achieved with no chatter marks and minimum noice whilst pushing feed rates up to 30% higher. 3 micron run-out accuracy and balanced to 25,000RPM.
https://www.cutwel.co.uk/sk40-power-e-hydro-hydraulic-chuck-kit-yg-1-e-hydro-sk40-set128578SK40 Power E-Hydro Hydraulic Chuck Kit - (YG-1)https://www.cutwel.co.uk/media/catalog/product/p/o/power-e-hydro-set-1.jpg291.5291.500000GBPInStock/Landing Pages/Shop By/Shop By Taper/SK (DIN69871) Spindle Tooling/SK40 Spindle Tooling/SK40 Hydraulic Chucks/Tool Holding/Spindle Tooling/HPH High Torque Hydraulic Chucks/Hydraulic Chucks/Tool Holding/Spindle Tooling/Power-E Hydro (High Torque) Hydraulic Chucks/Hydraulic Chucks/Power E-Hydro Chuck KitsSK40 YG-1 POWER E-HYDRO Toolholders give up to 300% more tool life than ER Collet Chucks with up to 900Nm clamping force. Perfect surface finish is achieved with no chatter marks and minimum noice whilst pushing feed rates up to 30% higher. 3 micron run-out accuracy and balanced to 25,000RPM. <ul>
<li>The Ultimate Hydraulic Toolholder For Milling, Drilling and Reaming</li>
<li>Up to 300% more tool life than ER Collet Chucks</li>
<li>Sleeves included: 1 x 6,8,10,12 &16mm</li>
<li>Up to 900Nm clamping force</li>
<li>Perfect surface finish – no chatter marks</li>
<li>Push feed rates up to 30% higher</li>
<li>Minimum noise</li>
<li>Change cutting tool in seconds with 3 micron repeatability</li>
<li>3 micron run-out accuracy, balanced to 25,000RPM</li>
<li>Contains 20mm BT40 toolholder</li>
<li>Compact design</li>
<li>Suitable for through coolant tools</li>
</ul>GBP00https://www.cutwel.co.uk/media/catalog/product/p/o/power-e-hydro.jpghttps://www.cutwel.co.uk/media/catalog/product/p/o/power-e-hydro-2.jpghttps://www.cutwel.co.uk/media/catalog/product/p/o/power-e-hydro-set-2.jpgE-HYDRO-SK40-SET
Free Delivery on Orders Over £79 ex vat*
The BEST Technical Advice in the Industry
