Free Next Day Delivery
on orders over £39 ex vat*

Expert Technical Team
Get advice on 01924 869 615

Same Day Despatch
On orders placed up to 6pm

Clamping Heads

Clamping Heads

Clamping Heads from DT Technologies are compatible with Hainbuch chucks. Clamping heads can exert higher clamping forces than conventional chucks with a higher level of accuracy. Available with Round, Square or Hexagon shapes in Smooth or Grooved/Serrated designs.

Filter By
Page

50 Items

Sort By
Sku 80LH18

Hexagon Clamping Head from DT Technologies with a smooth finish for clamping materials where a clean surface finish is required. Clamping heads can exert higher clamping forces than conventional chuck...

  • Hexagon clamping head
  • Smooth finish, ideal for applications where surface finish is important
  • Clamping heads are suitable for holding workpieces or raw materials of a similar share
  • Can exert higher clamping forces than conventional chucks with greater accuracy
7 days*
Now £301.37 £251.14 Was £334.85 £279.04

*Estimated lead time, subject to availability

Sku 80LD18

Round Clamping Head from DT Technologies with a smooth finish for clamping materials where a clean surface finish is required. Clamping heads can exert higher clamping forces than conventional chucks ...

  • Round clamping head
  • Smooth finish, ideal for applications where surface finish is important
  • Clamping heads are suitable for holding workpieces or raw materials of a similar share
  • Can exert higher clamping forces than conventional chucks with greater accuracy
7 days*
Now £251.15 £209.29 Was £279.05 £232.54

*Estimated lead time, subject to availability

Sku 42LC18

Square Clamping Head from DT Technologies with a smooth finish for clamping materials where a clean surface finish is required. Clamping heads can exert higher clamping forces than conventional chucks...

  • Square clamping head
  • Smooth finish, ideal for applications where surface finish is important
  • Clamping heads are suitable for holding workpieces or raw materials of a similar share
  • Can exert higher clamping forces than conventional chucks with greater accuracy
7 days*
Now £156.28 £130.23 Was £173.64 £144.70

*Estimated lead time, subject to availability

Sku 42SD18

Round Clamping Head from DT Technologies with a serrated design to prevent push back and ideal for applications where marking is less of an issue. Clamping heads can exert higher clamping forces than ...

  • Round clamping head
  • Serrated design, ideal for applications where marking is less of an issue
  • Clamping heads are suitable for holding workpieces or raw materials of a similar share
  • Can exert higher clamping forces than conventional chucks with greater accuracy
7 days*
Now £128.36 £106.97 Was £142.62 £118.85

*Estimated lead time, subject to availability

Sku 42RD18

Round Clamping Head from DT Technologies with a grooved design to prevent push back and ideal for applications where marking is less of an issue. Clamping heads can exert higher clamping forces than c...

  • Round clamping head
  • Serrated design, ideal for applications where marking is less of an issue
  • Clamping heads are suitable for holding workpieces or raw materials of a similar share
  • Can exert higher clamping forces than conventional chucks with greater accuracy
7 days*
Now £128.36 £106.97 Was £142.62 £118.85

*Estimated lead time, subject to availability

Sku 80EMD18

Emergency clamping heads have a small diameter hole that can be bored out to a bigger diameter. Clamping heads can exert higher clamping forces than conventional chucks with a higher level of accuracy...

  • Emergency clamping head
  • Small diameter hole that can be bored out to a larger diameter
  • Clamping heads are suitable for holding workpieces or raw materials of a similar share
  • Can exert higher clamping forces than conventional chucks with greater accuracy
7 days*
Now £259.92 £216.60 Was £288.80 £240.67

*Estimated lead time, subject to availability

Sku 42LD18

Round Clamping Head from DT Technologies with a smooth finish for clamping materials where a clean surface finish is required. Clamping heads can exert higher clamping forces than conventional chucks ...

  • Round clamping head
  • Smooth finish, ideal for applications where surface finish is important
  • Clamping heads are suitable for holding workpieces or raw materials of a similar share
  • Can exert higher clamping forces than conventional chucks with greater accuracy
7 days*
Now £128.36 £106.97 Was £142.62 £118.85

*Estimated lead time, subject to availability

Sku 65BRH18

Hexagon Clamping Head from DT Technologies with a grooved design to prevent push back and ideal for applications where marking is less of an issue. Clamping heads can exert higher clamping forces than...

  • Hexagon clamping head
  • Serrated design, ideal for applications where marking is less of an issue
  • Clamping heads are suitable for holding workpieces or raw materials of a similar share
  • Can exert higher clamping forces than conventional chucks with greater accuracy
7 days*
Now £185.28 £154.40 Was £205.87 £171.56

*Estimated lead time, subject to availability

Sku 42RH18

Hexagon Clamping Head from DT Technologies with a grooved design to prevent push back and ideal for applications where marking is less of an issue. Clamping heads can exert higher clamping forces than...

  • Hexagon clamping head
  • Serrated design, ideal for applications where marking is less of an issue
  • Clamping heads are suitable for holding workpieces or raw materials of a similar share
  • Can exert higher clamping forces than conventional chucks with greater accuracy
7 days*
Now £156.28 £130.23 Was £173.64 £144.70

*Estimated lead time, subject to availability

Sku 52LH18

Hexagon Clamping Head from DT Technologies with a smooth finish for clamping materials where a clean surface finish is required. Clamping heads can exert higher clamping forces than conventional chuck...

  • Hexagon clamping head
  • Smooth finish, ideal for applications where surface finish is important
  • Clamping heads are suitable for holding workpieces or raw materials of a similar share
  • Can exert higher clamping forces than conventional chucks with greater accuracy
7 days*
Now £156.28 £130.23 Was £173.64 £144.70

*Estimated lead time, subject to availability

Sku 65BLD18

Round Clamping Head from DT Technologies with a smooth finish for clamping materials where a clean surface finish is required. Clamping heads can exert higher clamping forces than conventional chucks ...

  • Round clamping head
  • Smooth finish, ideal for applications where surface finish is important
  • Clamping heads are suitable for holding workpieces or raw materials of a similar share
  • Can exert higher clamping forces than conventional chucks with greater accuracy
7 days*
Now £171.25 £142.71 Was £190.28 £158.57

*Estimated lead time, subject to availability

Sku 65BLH18

Hexagon Clamping Head from DT Technologies with a smooth finish for clamping materials where a clean surface finish is required. Clamping heads can exert higher clamping forces than conventional chuck...

  • Hexagon clamping head
  • Smooth finish, ideal for applications where surface finish is important
  • Clamping heads are suitable for holding workpieces or raw materials of a similar share
  • Can exert higher clamping forces than conventional chucks with greater accuracy
7 days*
Now £185.28 £154.40 Was £205.87 £171.56

*Estimated lead time, subject to availability

Sku 80SD18

Round Clamping Head from DT Technologies with a serrated design to prevent push back and ideal for applications where marking is less of an issue. Clamping heads can exert higher clamping forces than ...

  • Round clamping head
  • Serrated design, ideal for applications where marking is less of an issue
  • Clamping heads are suitable for holding workpieces or raw materials of a similar share
  • Can exert higher clamping forces than conventional chucks with greater accuracy
7 days*
Now £251.15 £209.29 Was £279.05 £232.54

*Estimated lead time, subject to availability

Sku 52RD18

Round Clamping Head from DT Technologies with a grooved design to prevent push back and ideal for applications where marking is less of an issue. Clamping heads can exert higher clamping forces than c...

  • Round clamping head
  • Serrated design, ideal for applications where marking is less of an issue
  • Clamping heads are suitable for holding workpieces or raw materials of a similar share
  • Can exert higher clamping forces than conventional chucks with greater accuracy
7 days*
Now £139.52 £116.27 Was £155.03 £129.19

*Estimated lead time, subject to availability

Sku 80RC18

Square Clamping Head from DT Technologies with a grooved design to prevent push back and are ideal for applications where marking is less of an issue. Clamping heads can exert higher clamping forces t...

  • Square clamping head
  • Serrated design, ideal for applications where marking is less of an issue
  • Clamping heads are suitable for holding workpieces or raw materials of a similar share
  • Can exert higher clamping forces than conventional chucks with greater accuracy
7 days*
Now £301.37 £251.14 Was £334.85 £279.04

*Estimated lead time, subject to availability

Sku 80RD18

Round Clamping Head from DT Technologies with a grooved design to prevent push back and ideal for applications where marking is less of an issue. Clamping heads can exert higher clamping forces than c...

  • Round clamping head
  • Serrated design, ideal for applications where marking is less of an issue
  • Clamping heads are suitable for holding workpieces or raw materials of a similar share
  • Can exert higher clamping forces than conventional chucks with greater accuracy
7 days*
Now £251.15 £209.29 Was £279.05 £232.54

*Estimated lead time, subject to availability

Sku 80RH18

Hexagon Clamping Head from DT Technologies with a grooved design to prevent push back and ideal for applications where marking is less of an issue. Clamping heads can exert higher clamping forces than...

  • Hexagon clamping head
  • Serrated design, ideal for applications where marking is less of an issue
  • Clamping heads are suitable for holding workpieces or raw materials of a similar share
  • Can exert higher clamping forces than conventional chucks with greater accuracy
7 days*
Now £301.37 £251.14 Was £334.85 £279.04

*Estimated lead time, subject to availability

Sku 32LH18

Hexagon Clamping Head from DT Technologies with a smooth finish for clamping materials where a clean surface finish is required. Clamping heads can exert higher clamping forces than conventional chuck...

  • Hexagon clamping head
  • Smooth finish, ideal for applications where surface finish is important
  • Clamping heads are suitable for holding workpieces or raw materials of a similar share
  • Can exert higher clamping forces than conventional chucks with greater accuracy
7 days*
Now £150.70 £125.58 Was £167.44 £139.53

*Estimated lead time, subject to availability

Sku 42LH18

Hexagon Clamping Head from DT Technologies with a smooth finish for clamping materials where a clean surface finish is required. Clamping heads can exert higher clamping forces than conventional chuck...

  • Hexagon clamping head
  • Smooth finish, ideal for applications where surface finish is important
  • Clamping heads are suitable for holding workpieces or raw materials of a similar share
  • Can exert higher clamping forces than conventional chucks with greater accuracy
7 days*
Now £156.28 £130.23 Was £173.64 £144.70

*Estimated lead time, subject to availability

Sku 42RC18

Square Clamping Head from DT Technologies with a grooved design to prevent push back and are ideal for applications where marking is less of an issue. Clamping heads can exert higher clamping forces t...

  • Square clamping head
  • Serrated design, ideal for applications where marking is less of an issue
  • Clamping heads are suitable for holding workpieces or raw materials of a similar share
  • Can exert higher clamping forces than conventional chucks with greater accuracy
7 days*
Now £156.28 £130.23 Was £173.64 £144.70

*Estimated lead time, subject to availability

Sku 52LD18

Round Clamping Head from DT Technologies with a smooth finish for clamping materials where a clean surface finish is required. Clamping heads can exert higher clamping forces than conventional chucks ...

  • Round clamping head
  • Smooth finish, ideal for applications where surface finish is important
  • Clamping heads are suitable for holding workpieces or raw materials of a similar share
  • Can exert higher clamping forces than conventional chucks with greater accuracy
7 days*
Now £139.52 £116.27 Was £155.03 £129.19

*Estimated lead time, subject to availability

Sku 42BRD18

Round Clamping Head from DT Technologies with a grooved design to prevent push back and ideal for applications where marking is less of an issue. Clamping heads can exert higher clamping forces than c...

  • Round clamping head
  • Serrated design, ideal for applications where marking is less of an issue
  • Clamping heads are suitable for holding workpieces or raw materials of a similar share
  • Can exert higher clamping forces than conventional chucks with greater accuracy
7 days*
Now £128.36 £106.97 Was £142.62 £118.85

*Estimated lead time, subject to availability

Sku 42BRH18

Hexagon Clamping Head from DT Technologies with a grooved design to prevent push back and ideal for applications where marking is less of an issue. Clamping heads can exert higher clamping forces than...

  • Hexagon clamping head
  • Serrated design, ideal for applications where marking is less of an issue
  • Clamping heads are suitable for holding workpieces or raw materials of a similar share
  • Can exert higher clamping forces than conventional chucks with greater accuracy
7 days*
Now £156.28 £130.23 Was £173.64 £144.70

*Estimated lead time, subject to availability

Sku 42BSD18

Round Clamping Head from DT Technologies with a serrated design to prevent push back and ideal for applications where marking is less of an issue. Clamping heads can exert higher clamping forces than ...

  • Round clamping head
  • Serrated design, ideal for applications where marking is less of an issue
  • Clamping heads are suitable for holding workpieces or raw materials of a similar share
  • Can exert higher clamping forces than conventional chucks with greater accuracy
7 days*
Now £128.36 £106.97 Was £142.62 £118.85