Clamping Heads | Cutwel - Tool Holding Specialists Cutwel Ltd

28mm Grooved Round Clamping Head - 32R Series (DT Technologies)

Sku 32RD28

Round Clamping Head from DT Technologies with a grooved design to prevent push back and ideal for applications where marking is less of an issue. Clamping heads can exert higher clamping forces than c...

Round clamping head
Serrated design, ideal for applications where marking is less of an issue
Clamping heads are suitable for holding workpieces or raw materials of a similar share
Can exert higher clamping forces than conventional chucks with greater accuracy

7 days*

Now £128.36 £106.97 Was £142.62 £118.85

*Estimated lead time, subject to availability

28mm Serrated Round Clamping Head - 32S Series (DT Technologies)

Sku 32SD28

Round Clamping Head from DT Technologies with a serrated design to prevent push back and ideal for applications where marking is less of an issue. Clamping heads can exert higher clamping forces than ...

Round clamping head
Serrated design, ideal for applications where marking is less of an issue
Clamping heads are suitable for holding workpieces or raw materials of a similar share
Can exert higher clamping forces than conventional chucks with greater accuracy

7 days*

Now £128.36 £106.97 Was £142.62 £118.85

*Estimated lead time, subject to availability

28mm Smooth Hexagon Clamping Head - 42B Series (DT Technologies)

Sku 42BLH28

Hexagon Clamping Head from DT Technologies with a smooth finish for clamping materials where a clean surface finish is required. Clamping heads can exert higher clamping forces than conventional chuck...

Hexagon clamping head
Smooth finish, ideal for applications where surface finish is important
Clamping heads are suitable for holding workpieces or raw materials of a similar share
Can exert higher clamping forces than conventional chucks with greater accuracy

7 days*

Now £156.28 £130.23 Was £173.64 £144.70

*Estimated lead time, subject to availability

28mm Grooved Square Clamping Head - 42B Series (DT Technologies)

Sku 42BRC28

Square Clamping Head from DT Technologies with a grooved design to prevent push back and are ideal for applications where marking is less of an issue. Clamping heads can exert higher clamping forces t...

Square clamping head
Serrated design, ideal for applications where marking is less of an issue
Clamping heads are suitable for holding workpieces or raw materials of a similar share
Can exert higher clamping forces than conventional chucks with greater accuracy

7 days*

Now £156.28 £130.23 Was £173.64 £144.70

*Estimated lead time, subject to availability

28mm Smooth Square Clamping Head - 32L Series (DT Technologies)

Sku 32LC28

Square Clamping Head from DT Technologies with a smooth finish for clamping materials where a clean surface finish is required. Clamping heads can exert higher clamping forces than conventional chucks...

Square clamping head
Smooth finish, ideal for applications where surface finish is important
Clamping heads are suitable for holding workpieces or raw materials of a similar share
Can exert higher clamping forces than conventional chucks with greater accuracy

7 days*

Now £150.70 £125.58 Was £167.44 £139.53

*Estimated lead time, subject to availability

28mm Smooth Round Clamping Head - 42B Series (DT Technologies)

Sku 42BLD28

Round Clamping Head from DT Technologies with a smooth finish for clamping materials where a clean surface finish is required. Clamping heads can exert higher clamping forces than conventional chucks ...

Round clamping head
Smooth finish, ideal for applications where surface finish is important
Clamping heads are suitable for holding workpieces or raw materials of a similar share
Can exert higher clamping forces than conventional chucks with greater accuracy

7 days*

Now £128.36 £106.97 Was £142.62 £118.85

*Estimated lead time, subject to availability

28mm Grooved Square Clamping Head - 80R (DT Technologies)

Sku 80RC28

Square Clamping Head from DT Technologies with a grooved design to prevent push back and are ideal for applications where marking is less of an issue. Clamping heads can exert higher clamping forces t...

Square clamping head
Serrated design, ideal for applications where marking is less of an issue
Clamping heads are suitable for holding workpieces or raw materials of a similar share
Can exert higher clamping forces than conventional chucks with greater accuracy

7 days*

Now £301.37 £251.14 Was £334.85 £279.04

*Estimated lead time, subject to availability

28mm Grooved Hexagon Clamping Head - 80R (DT Technologies)

Sku 80RH28

Hexagon Clamping Head from DT Technologies with a grooved design to prevent push back and ideal for applications where marking is less of an issue. Clamping heads can exert higher clamping forces than...

Hexagon clamping head
Serrated design, ideal for applications where marking is less of an issue
Clamping heads are suitable for holding workpieces or raw materials of a similar share
Can exert higher clamping forces than conventional chucks with greater accuracy

7 days*

Now £301.37 £251.14 Was £334.85 £279.04

*Estimated lead time, subject to availability

28mm Grooved Round Clamping Head - 80R (DT Technologies)

Sku 80RD28

Round Clamping Head from DT Technologies with a grooved design to prevent push back and ideal for applications where marking is less of an issue. Clamping heads can exert higher clamping forces than c...

Round clamping head
Serrated design, ideal for applications where marking is less of an issue
Clamping heads are suitable for holding workpieces or raw materials of a similar share
Can exert higher clamping forces than conventional chucks with greater accuracy

7 days*

Now £251.15 £209.29 Was £279.05 £232.54

*Estimated lead time, subject to availability

28mm Smooth Square Clamping Head - 52L Series (DT Technologies)

Sku 52LC28

Square Clamping Head from DT Technologies with a smooth finish for clamping materials where a clean surface finish is required. Clamping heads can exert higher clamping forces than conventional chucks...

Square clamping head
Smooth finish, ideal for applications where surface finish is important
Clamping heads are suitable for holding workpieces or raw materials of a similar share
Can exert higher clamping forces than conventional chucks with greater accuracy

7 days*

Now £156.28 £130.23 Was £173.64 £144.70

*Estimated lead time, subject to availability

28mm Grooved Round Clamping Head - 42R Series (DT Technologies)

Sku 42RD28

Round Clamping Head from DT Technologies with a grooved design to prevent push back and ideal for applications where marking is less of an issue. Clamping heads can exert higher clamping forces than c...

Round clamping head
Serrated design, ideal for applications where marking is less of an issue
Clamping heads are suitable for holding workpieces or raw materials of a similar share
Can exert higher clamping forces than conventional chucks with greater accuracy

7 days*

Now £128.36 £106.97 Was £142.62 £118.85

*Estimated lead time, subject to availability

28mm Grooved Hexagon Clamping Head - 42R Series (DT Technologies)

Sku 42RH28

Hexagon Clamping Head from DT Technologies with a grooved design to prevent push back and ideal for applications where marking is less of an issue. Clamping heads can exert higher clamping forces than...

Hexagon clamping head
Serrated design, ideal for applications where marking is less of an issue
Clamping heads are suitable for holding workpieces or raw materials of a similar share
Can exert higher clamping forces than conventional chucks with greater accuracy

7 days*

Now £156.28 £130.23 Was £173.64 £144.70

*Estimated lead time, subject to availability

28mm Grooved Hexagon Clamping Head - 42B Series (DT Technologies)

Sku 42BRH28

Hexagon Clamping Head from DT Technologies with a grooved design to prevent push back and ideal for applications where marking is less of an issue. Clamping heads can exert higher clamping forces than...

Hexagon clamping head
Serrated design, ideal for applications where marking is less of an issue
Clamping heads are suitable for holding workpieces or raw materials of a similar share
Can exert higher clamping forces than conventional chucks with greater accuracy

7 days*

Now £156.28 £130.23 Was £173.64 £144.70

*Estimated lead time, subject to availability

28mm Serrated Round Clamping Head - 42B Series (DT Technologies)

Sku 42BSD28

Round Clamping Head from DT Technologies with a serrated design to prevent push back and ideal for applications where marking is less of an issue. Clamping heads can exert higher clamping forces than ...

Round clamping head
Serrated design, ideal for applications where marking is less of an issue
Clamping heads are suitable for holding workpieces or raw materials of a similar share
Can exert higher clamping forces than conventional chucks with greater accuracy

7 days*

Now £128.36 £106.97 Was £142.62 £118.85

*Estimated lead time, subject to availability

28mm Smooth Square Clamping Head - 42L Series (DT Technologies)

Sku 42LC28

Square Clamping Head from DT Technologies with a smooth finish for clamping materials where a clean surface finish is required. Clamping heads can exert higher clamping forces than conventional chucks...

Square clamping head
Smooth finish, ideal for applications where surface finish is important
Clamping heads are suitable for holding workpieces or raw materials of a similar share
Can exert higher clamping forces than conventional chucks with greater accuracy

7 days*

Now £156.28 £130.23 Was £173.64 £144.70

*Estimated lead time, subject to availability

28mm Serrated Round Clamping Head - 80S Series (DT Technologies)

Sku 80SD28

Round Clamping Head from DT Technologies with a serrated design to prevent push back and ideal for applications where marking is less of an issue. Clamping heads can exert higher clamping forces than ...

Round clamping head
Serrated design, ideal for applications where marking is less of an issue
Clamping heads are suitable for holding workpieces or raw materials of a similar share
Can exert higher clamping forces than conventional chucks with greater accuracy

7 days*

Now £251.15 £209.29 Was £279.05 £232.54

*Estimated lead time, subject to availability

28mm Serrated Round Clamping Head - 65B Series (DT Technologies)

Sku 65BSD28

Round Clamping Head from DT Technologies with a serrated design to prevent push back and ideal for applications where marking is less of an issue. Clamping heads can exert higher clamping forces than ...

Round clamping head
Serrated design, ideal for applications where marking is less of an issue
Clamping heads are suitable for holding workpieces or raw materials of a similar share
Can exert higher clamping forces than conventional chucks with greater accuracy

7 days*

Now £150.70 £125.58 Was £167.44 £139.53

*Estimated lead time, subject to availability

28mm Smooth Round Clamping Head - 65L Series (DT Technologies)

Sku 65LD28

Round Clamping Head from DT Technologies with a smooth finish for clamping materials where a clean surface finish is required. Clamping heads can exert higher clamping forces than conventional chucks ...

Round clamping head
Smooth finish, ideal for applications where surface finish is important
Clamping heads are suitable for holding workpieces or raw materials of a similar share
Can exert higher clamping forces than conventional chucks with greater accuracy

7 days*

Now £150.70 £125.58 Was £167.44 £139.53

*Estimated lead time, subject to availability

28mm Smooth Square Clamping Head - 65L Series (DT Technologies)

Sku 65LC28

Square Clamping Head from DT Technologies with a smooth finish for clamping materials where a clean surface finish is required. Clamping heads can exert higher clamping forces than conventional chucks...

Square clamping head
Smooth finish, ideal for applications where surface finish is important
Clamping heads are suitable for holding workpieces or raw materials of a similar share
Can exert higher clamping forces than conventional chucks with greater accuracy

7 days*

Now £185.28 £154.40 Was £205.87 £171.56

*Estimated lead time, subject to availability

28mm Smooth Hexagon - 65L Series (DT Technologies)

Sku 65LH28

Hexagon Clamping Head from DT Technologies with a smooth finish for clamping materials where a clean surface finish is required. Clamping heads can exert higher clamping forces than conventional chuck...

Hexagon clamping head
Smooth finish, ideal for applications where surface finish is important
Clamping heads are suitable for holding workpieces or raw materials of a similar share
Can exert higher clamping forces than conventional chucks with greater accuracy

7 days*

Now £185.28 £154.40 Was £205.87 £171.56

*Estimated lead time, subject to availability

28mm Grooved Hexagon Clamping Head - 52R Series (DT Technologies)

Sku 52RH28

Hexagon Clamping Head from DT Technologies with a grooved design to prevent push back and ideal for applications where marking is less of an issue. Clamping heads can exert higher clamping forces than...

Hexagon clamping head
Serrated design, ideal for applications where marking is less of an issue
Clamping heads are suitable for holding workpieces or raw materials of a similar share
Can exert higher clamping forces than conventional chucks with greater accuracy

7 days*

Now £156.28 £130.23 Was £173.64 £144.70

*Estimated lead time, subject to availability

28mm Smooth Square Clamping Head - 80L Series (DT Technologies)

Sku 80LC28

Square Clamping Head from DT Technologies with a smooth finish for clamping materials where a clean surface finish is required. Clamping heads can exert higher clamping forces than conventional chucks...

Square clamping head
Smooth finish, ideal for applications where surface finish is important
Clamping heads are suitable for holding workpieces or raw materials of a similar share
Can exert higher clamping forces than conventional chucks with greater accuracy

7 days*

Now £301.37 £251.14 Was £334.85 £279.04

*Estimated lead time, subject to availability

28mm Grooved Hexagon Clamping Head - 65R (DT Technologies)

Sku 65RH28

Hexagon Clamping Head from DT Technologies with a grooved design to prevent push back and ideal for applications where marking is less of an issue. Clamping heads can exert higher clamping forces than...

Hexagon clamping head
Serrated design, ideal for applications where marking is less of an issue
Clamping heads are suitable for holding workpieces or raw materials of a similar share
Can exert higher clamping forces than conventional chucks with greater accuracy

7 days*

Now £185.28 £154.40 Was £205.87 £171.56

*Estimated lead time, subject to availability

28mm Grooved Round Clamping Head - 65R (DT Technologies)

Sku 65RD28

Round Clamping Head from DT Technologies with a grooved design to prevent push back and ideal for applications where marking is less of an issue. Clamping heads can exert higher clamping forces than c...

Round clamping head
Serrated design, ideal for applications where marking is less of an issue
Clamping heads are suitable for holding workpieces or raw materials of a similar share
Can exert higher clamping forces than conventional chucks with greater accuracy

7 days*

Now £150.70 £125.58 Was £167.44 £139.53

*Estimated lead time, subject to availability

28mm Smooth Round Clamping Head - 32L Series (DT Technologies)

Sku 32LD28

Round Clamping Head from DT Technologies with a smooth finish for clamping materials where a clean surface finish is required. Clamping heads can exert higher clamping forces than conventional chucks ...

Round clamping head
Smooth finish, ideal for applications where surface finish is important
Clamping heads are suitable for holding workpieces or raw materials of a similar share
Can exert higher clamping forces than conventional chucks with greater accuracy

7 days*

Now