MAIN STYLE TAGS
MOBILE VIEW HTML
Korloy King Drill XL
Adjustable drilling system for large diameter machining up to 100mm
Unique cartridge system to adjust the drilling diameter by up to 5mm in 1mm increments.
P
M
S
K
N
Browse the Range
Korloy King Drill XL
Holders
| Application |
|
| Diameters | 60-100mm |
60-100mm large diameter machining. Through coolant. Cartridge style for adjustable diameters <5mm.
Korloy King Drill
Inserts
| Application |
|
| Diameters | 12-100mm |
Inserts available in grades for steel, stainless steel, HRSA's, cast iron, aluminium & plastic. Special dual insert geometry eliminates tool failure by up to 90%.
Advantages
Adjustable Diameter
Unique cartridge system can adjust diameter by up to 5mm
Reduced Tool Failure
Next generation dual insert design eliminates tool failure by up to 90%
Minimal Deflection
The straightest holes even at 4xD with minimal deflection on entry
Ultra Reliable
Renowned for it's reliability with equal and consistent wear
Features
Dual Insert Design
Dual insert u-drill for ultra efficient drilling with low cutting loads
Through Coolant
Through coolant capabilities for longer tool life and better chip flow
Multi-Material Inserts
Inserts for steel, stainless steel, HRSA’s, cast iron & non-ferrous
Easy to Adjust
Diameter is easy to adjust with the adjusting bolt & washers
King Drill Inserts
Steel, Stainless Steel, HRSA's & Cast Iron
Central Insert
XOMT
Peripheral Insert
SPMT
Aluminium & Plastics
Central Insert
XOET
Peripheral Insert
SPET
King Drill Grade Guide
| Grade | Insert | Materials | Description | PC3700* | SPMT | Steel <45 HRC
| 1st choice grade for steel drilling. |
|---|---|---|---|
| PC5300 | SPMT/XOMT | Steel <45 HRC
Stainless Steel
HRSA's
Cast Iron
|
Best selling universal grade for stable machining. |
| PC5335 | SPMT/XOMT | Steel <45 HRC
Stainless Steel
HRSA's
Cast Iron
|
Tough universal grade for stable machining. |
| PC6510* | SPMT |
Cast Iron
|
1st choice grade for cast iron drilling. |
| KEP8545 | SPMT/XOMT | Stainless Steel
HRSA's
|
Premium wear resistant grade for stainless steel & HRSA’s. |
| H01 | SPET/XOET | Non-Ferrous |
Uncoated inserts for dedicated aluminium & non-ferrous drilling. |
*These grades are only available in the peripheral insert type. Please pair with a PC5300 grade central insert.
Grade Guide
| Grade | Chipbreaker | Materials | Features & Benefits |
|---|---|---|---|
| PC2505 | MM | Hardened Steel 45-60HRC |
Ideal for continuous-light interrupted cutting at medium-low surface speeds on heat treated steel & high hardened steel with excellent wear resistance. |
| PC2501 | MM | Hardened Steel / Pre-Hardened Steel 35-50HRC |
Ideal for continuous-light interrupted cutting at medium-low surface speeds on high hardened steel & pre-hardened steel with excellent impact resistance. |
| PC3700 | MF MM |
Steel <40 HRC |
Dedicated steel grade for continuous-light interrupted cutting at medium-high surface speeds. Provides advanced performance & maximum efficiency. |
| PC5300 | MM MF ML |
Steel <40 HRC
Stainless Steel
HRSA's
Cast Iron
|
General PVD coated grade with high toughness for longer tool life. Suitable for light-heavy interrupted cutting at medium-high surface speeds. |
| PC5400 | MM MF ML |
Steel <35 HRC
Stainless Steel
HRSA's
Cast Iron
|
General purpose grade with excellent wear resistance & surface roughness when low speed machining. Ideal for continuous-heavy interrupted cutting. |
| PC6510 | MM | Cast Iron |
Specialised grade for multi-purpose milling applications of cast iron. Suitable for continuous-light interrupted cutting at medium-high surface speeds. |
| PC9530 | MM | Stainless Steel |
Ultra fine substrate for medium & roughing in stainless steel milling. Ideal for high feed continuous-light interrupted cutting. |
| H01 (Uncoated) | MA | Non-Ferrous |
Dedicated non ferrous grade for high speed, high feed milling & mirror surface finish. Uncoated polished grade for maximum swarf control in medium-high speed cutting. |
| UNC840 (CVD) | ML | HRSA's |
Premium grade for machining of HRSA including Inconel, Hastelloy, Titanium alloy etc. Ideal for continuous-light interrupted cutting at high speed-low feed machining. |
Application
Material Suitability
| Material | Excellent | Good |
|---|---|---|
|
P
Steel
|
• | • |
|
H
Hardened Steel
|
• | • |
|
M
Stainless Steel
|
• | • |
|
S
HRSA's
|
• | • |
|
K
Cast Iron
|
• | • |
|
N
Aluminium & Non-Ferrous
|
• | • |
Possible Machining Methods
Face Milling
Trochoidal Milling
Side Cutting
Slotting
Circular Interpolation
Don't have an account?
Creating an account has many benefits: check out faster, keep more than one address, track orders and more.