KSEM Modular Drill System - Modular Drill Systems

Stainless Steel KC7320 HPL-Point Geometry KSEM Inserts (Kennametal)

The KSEM HPL modular drill insert provides perfect results and very high productivity in stainless steel. HPL geometry forms two chips per cutting edge for an uninterrupted, smooth chip flow with very...

KSEM system enables very aggressive feed rates in many applications to enable extremely high productivity levels.
Economical and reliable system for drilling in intermediate diameter ranges.
Grade KC7320 features a high Al content TiAlN coating on a universal fine-grain carbide. Its excellent oxidation stability and carbide toughness enables a high level of wear resistance in austenitic and other stainless steels.
Robust pocket design for increased insert and holder life.
Four-wall pocket provides insert stability.
KSEM KC7320™ HPL cutting edges provide perfect results and very high productivity in stainless steel.
HPL geometry forms two chips per cutting edge for an uninterrupted, smooth chip flow. Very high metal removal rates and a reliable drilling process up to 10 x D makes HPL the superior solution for drilling in stainless steels.

Size

Diameter (mm)	12.5 - 40
Overall Length (mm)	155 - 155
Flute Length (mm)	40 - 40
Shank (mm)	32 - 32

From £97.44 £81.20

View Products

Stainless Steel & Exotics KCMS35 SPL-Point Geometry KSEM Inserts (Kennametal)

The KSEM SPL modular drill insert offers extraordinary drilling performance in stainless steel, exotics and other demanding materials. SPL Geometry provides process reliability, ensuring longer tool l...

KSEM system enables very aggressive feed rates in many applications to enable extremely high productivity levels.
Economical and reliable system for drilling in intermediate diameter ranges.
KCMS35™ is based on a very tough, fine-grain carbide substrate with a high Al content TiAlN PVD coating. It offers a high level of wear resistance and oxidation stability in parallel with chipping resistance for centre point and cutting edges.
Robust pocket design for increased insert and holder life.
Four-wall pocket provides insert stability.
SPL geometry was made to offer extraordinary drilling performance in stainless steels, super alloys, and other demanding environments.
KSEM SPL provides process reliability, ensuring longer tool life and productivity in difficult-to-machine materials. Its advanced-point geometry and web design greatly reduces cutting forces.
This insert style is ideally suited to drill heavy-duty and corrosion-resistant tube end sheets and other heat exchanger components (especially from M3 and type S materials).
Use KSEM KCMS35 SPL inserts as an effective alternative for plain and alloyed steels, as well as in the most important Al and Cu applications.

Size

Diameter (mm)	12.5 - 40
Overall Length (mm)	155 - 155
Flute Length (mm)	40 - 40
Shank (mm)	32 - 32

From £111.84 £93.20

View Products

Steel KCPM45 FEG-Point Geometry Flat Bottom KSEM Inserts (Kennametal)

The KSEM FEG modular drill insert is flat bottom to create 180° flat holes - only a small cavity remains in the centre of the hole. KSEM offers extraordinarily strong pocket seats for demanding flat-...

KSEM system enables very aggressive feed rates in many applications to enable extremely high productivity levels.
Economical and reliable system for drilling in intermediate diameter ranges.
KCPM45™ combines a very tough, fine-grain carbide substrate with an advanced multilayer TiAlN coating. It is capable of machining steel even in the most demanding conditions.
Robust pocket design for increased insert and holder life.
Four-wall pocket provides insert stability.
FEG flat-bottom inserts create 180° flat holes — only a small cavity remains in the centre of the hole ground. KSEM offers an extraordinarily strong pocket seat for your demanding flat-bottom applications.
KSEM FEG inserts feature a small centring point as well as double margin lands for improved guidance and hole straightness. A corner chamfer serves to reduce bur formation and to improve tool life.
Whether it is a blind hole, a through hole, or if you need to countersink, these inserts are focused on versatility and will support you in many essential drilling applications.
Use KSEM FEG KCPM45 cutting edges as an effective alternative in cast iron, stainless steel, and high-temp alloys.

Size

Diameter (mm)	16 - 40
Overall Length (mm)	155 - 155
Flute Length (mm)	40 - 40
Shank (mm)	32 - 32

From £137.40 £114.50

View Products

Steel & Cast Iron KC7135 PC-Point Geometry KSEM Inserts (Kennametal)

The KSEM PC modular drill insert has cutting edges serving mainly as precentring inserts, but can also be used in demanding conditions. The steep 150° dehree angle has a light corner chamfer, offerin...

KSEM system enables very aggressive feed rates in many applications to enable extremely high productivity levels.
Economical and reliable system for drilling in intermediate diameter ranges.
KC7135™ is a very resistant grade featuring a TiCN-TiN PVD coating.
Robust pocket design for increased insert and holder life.
Four-wall pocket provides insert stability.
KSEM PC cutting edges serve mainly as precentring inserts, but can also be used in demanding conditions.
Steep 150° degree angle with a light corner chamfer. Very good centring capability and edge chipping resistance.

Size

Diameter (mm)	12.5 - 40
Overall Length (mm)	155 - 155
Flute Length (mm)	40 - 40
Shank (mm)	32 - 32

From £110.88 £92.40

View Products

5xD KSEM Whistle Notch Shank Holder (Kennametal)

This 5xD KSEM Modular Drill system enables very aggressive feed rates and high productivity levels. Holders feature a robust pocket design for increased insert and holder life, with inserts requiring ...

KSEM system enables very aggressive feed rates in many applications to enable extremely high productivity levels.
Economical and reliable system for drilling in intermediate diameter ranges.
5xD drill depth with 2° whistle notch shank.
Drill supplied with central lock screw, wrench and side pipe plug.
Use designated insert blade with each drill body.
Robust pocket design for increased insert and holder life.
Flanged shanks (bodies with diameters > 32mm) with 2 flats for external coolant supply.
Four-wall pocket provides insert stability.
Application specific selection of geometries for unmatched performance.
Excellent centring capabilities.

Size

Diameter (mm)	22.5 - 40
Overall Length (mm)	155 - 155
Flute Length (mm)	40 - 40
Shank (mm)	25 - 50

From £476.40 £397.00

View Products

Steel KC7315 HPG-Point Geometry KSEM Inserts (Kennametal)

The KSEM HPG modular drill insert enables high metal removal rates and superior tool life in steel applications. The HPG geometry utilises reinforced cutting edges and good chip forming to improve too...

KSEM system enables very aggressive feed rates in many applications to enable extremely high productivity levels.
Economical and reliable system for drilling in intermediate diameter ranges.
KC7315™ grade TiAlN-based PVD multilayer coating for high cutting speeds, primarily in steel applications.
Robust pocket design for increased insert and holder life.
Four-wall pocket provides insert stability.
HPG geometry works with low cutting and feed forces and provides very good centring.
Reinforced cutting edges and good chip forming improve tool life due to high wear and edge chipping resistance.
KC7315 HPG cutting edges are perfectly suited to drill alloyed and high-alloy steels.
Use KC7315 HPG cutting edges as an alternative to cast iron materials.

Size

Diameter (mm)	12.5 - 39.75
Overall Length (mm)	155 - 155
Flute Length (mm)	40 - 40
Shank (mm)	32 - 32

From £88.70 £73.92

View Products

Steel KCPM45 HPG-Point Geometry KSEM Inserts (Kennametal)

The KSEM HPG modular drill insert enables high metal removal rates and superior tool life in steel applications. The HPG geometry utilises reinforced cutting edges and good chip forming to improve too...

KSEM system enables very aggressive feed rates in many applications to enable extremely high productivity levels.
Economical and reliable system for drilling in intermediate diameter ranges.
KCPM45 combines a very tough, fine-grain carbide substrate with an advanced multilayer TiAlN coating. It is capable of machining steel even in the most demanding conditions.
Robust pocket design for increased insert and holder life.
Four-wall pocket provides insert stability.
HPG geometry works with low cutting and feed forces and provides very good centring.
Reinforced cutting edges and good chip forming improve tool life due to high wear and edge chipping resistance.
Material snap back, stacked plates, cross holes, and inclined exits are some examples of where KCPM45 HPG edges will do a great job in your operations.
Use KCPM45 HPG cutting edges as an effective alternative in stainless steel as well.

Size

Diameter (mm)	12.5 - 40
Overall Length (mm)	155 - 155
Flute Length (mm)	40 - 40
Shank (mm)	32 - 32

From £94.75 £78.96

View Products

7xD KSEM Whistle Notch Shank Holder (Kennametal)

This 7xD KSEM Modular Drill system enables very aggressive feed rates and high productivity levels. Holders feature a robust pocket design for increased insert and holder life, with inserts requiring ...

KSEM system enables very aggressive feed rates in many applications to enable extremely high productivity levels.
Economical and reliable system for drilling in intermediate diameter ranges.
7xD drill depth with 2° whistle notch shank.
Drill supplied with central lock screw, wrench and side pipe plug.
Use designated insert blade with each drill body.
Robust pocket design for increased insert and holder life.
Four-wall pocket provides insert stability.
Application specific selection of geometries for unmatched performance.
Excellent centring capabilities.

Size

Diameter (mm)	12.5 - 32
Overall Length (mm)	155 - 155
Flute Length (mm)	40 - 40
Shank (mm)	16 - 32

From £334.56 £278.80

View Products

10xD KSEM Whistle Notch Shank Holder (Kennametal)

This 10xD KSEM Modular Drill system enables very aggressive feed rates and high productivity levels. Holders feature a robust pocket design for increased insert and holder life, with inserts requiring...

KSEM system enables very aggressive feed rates in many applications to enable extremely high productivity levels.
Economical and reliable system for drilling in intermediate diameter ranges.
10xD drill depth with 2° whistle notch shank.
Drill supplied with central lock screw, wrench and side pipe plug.
Use designated insert blade with each drill body.
Robust pocket design for increased insert and holder life.
Four-wall pocket provides insert stability.
Application specific selection of geometries for unmatched performance.
Excellent centring capabilities.

Size

Diameter (mm)	12.5 - 32
Overall Length (mm)	155 - 155
Flute Length (mm)	40 - 40
Shank (mm)	16 - 32

From £404.40 £337.00

View Products

1xD KSEM Whistle Notch Shank Holder (Kennametal)

This 1xD KSEM Modular Drill system enables very aggressive feed rates and high productivity levels. Holders feature a robust pocket design for increased insert and holder life, with inserts requiring ...

KSEM system enables very aggressive feed rates in many applications to enable extremely high productivity levels.
Economical and reliable system for drilling in intermediate diameter ranges.
1xD drill depth with 2° whistle notch shank.
Drill supplied with central lock screw, wrench and side pipe plug.
Use designated insert blade with each drill body.
Robust pocket design for increased insert and holder life.
Flanged shanks (bodies with diameters > 32mm) with 2 flats for external coolant supply.
Four-wall pocket provides insert stability.
Application specific selection of geometries for unmatched performance.
Excellent centring capabilities.

Size

Diameter (mm)	12.5 - 36.1
Overall Length (mm)	66 - 155
Flute Length (mm)	10 - 40
Shank (mm)	16 - 50

From £184.62 £153.85

View Products

3xD KSEM Whistle Notch Shank Holder (Kennametal)

This 3xD KSEM Modular Drill system enables very aggressive feed rates and high productivity levels. Holders feature a robust pocket design for increased insert and holder life, with inserts requiring ...

KSEM system enables very aggressive feed rates in many applications to enable extremely high productivity levels.
Economical and reliable system for drilling in intermediate diameter ranges.
3xD drill depth with 2° whistle notch shank.
Drill supplied with central lock screw, wrench and side pipe plug.
Use designated insert blade with each drill body.
Robust pocket design for increased insert and holder life.
Flanged shanks (bodies with diameters > 32mm) with 2 flats for external coolant supply.
Four-wall pocket provides insert stability.
Application specific selection of geometries for unmatched performance.
Excellent centring capabilities.

Size

Diameter (mm)	12.5 - 40
Overall Length (mm)	155 - 155
Flute Length (mm)	40 - 40
Shank (mm)	16 - 50

From £202.48 £168.73

View Products

Cast Iron KC7410 HPCCL-Point Geometry KSEM Inserts (Kennametal)

The KSEM HPG modular drill insert focuses on tool life and reliability in cast iron materials, offering increased feed forces and productivity. HPPCL geometries contains a corner chamfer and strong ed...

KSEM system enables very aggressive feed rates in many applications to enable extremely high productivity levels.
Economical and reliable system for drilling in intermediate diameter ranges.
KC7410 is a multilayer AlCr-based coating over fine-grain carbide. It is extraordinarily wear resistant in cast iron applications due to its high hot hardness.
Robust pocket design for increased insert and holder life.
Four-wall pocket provides insert stability.
KSEM KC7410™ HPCCL focuses on tool life and process reliability in cast iron materials in all cast iron materials. It offers increased feed forces in increases your productivity.
HPCCL geometry offers a wide and strong HP-style chiseled edge that prevents material quenching in the centre, enabling high feed rates.
With a corner chamfer and strong edges, it creates high quality holes and increased tool life.
Use KC7410 HPCCL in all cast iron applications, especially when working in difficult conditions and CGI or ADI irons.

Size

Diameter (mm)	12.5 - 40
Overall Length (mm)	155 - 155
Flute Length (mm)	40 - 40
Shank (mm)	32 - 32

From £93.02 £77.52

View Products

Steel KC7315 HP-Point Geometry KSEM Inserts (Kennametal)

The KSEM HP modular drill insert enables high metal removal rates and superior tool life in steel applications. Wide and strong chiseled edge prevents material quenching in the centre, enabling high f...

KSEM system enables very aggressive feed rates in many applications to enable extremely high productivity levels.
Economical and reliable system for drilling in intermediate diameter ranges.
KC7315™ grade TiAlN-based PVD multilayer coating for high cutting speeds, primarily in steel applications.
Robust pocket design for increased insert and holder life.
Four-wall pocket provides insert stability.
HP geometry offers a wide and strong HP-style chiseled edge that prevents material quenching in the centre, enabling high feed rates.
Sickle shaped, honed cutting edges provide excellent chip forming and tool life, even in long chipping materials.
KC7315 HP cutting edges are perfectly suited to drill alloyed and high-alloy steels.
Use KC7315 HP cutting edges as an alternative to cast iron materials.

Size

Diameter (mm)	12.5 - 40
Overall Length (mm)	155 - 155
Flute Length (mm)	40 - 40
Shank (mm)	32 - 32

From £93.02 £77.52

View Products