YG-1 milling chucks offer an extremely versatile clamping option compared to traditional methods eg. end mill holders/side lock arbors. You are able to clamp various diameters via the use of milling c...
YG-1 milling chucks offer an extremely versatile clamping option compared to traditional methods eg. end mill holders/side lock arbors. You are able to clamp various diameters via the use of milling c...
YG-1 premium milling chucks offer an extremely versatile clamping option compared to traditional methods eg. end mill holders/side lock arbors. You are able to clamp various diameters via the use of m...
YG-1 premium milling chucks offer an extremely versatile clamping option compared to traditional methods eg. end mill holders/side lock arbors. You are able to clamp various diameters via the use of m...
High speed premium YG-1 milling chuck are balanced to G6.3 20,000RPM for high speed machining. These chucks offer an extremely versatile clamping option compared to traditional methods eg. end mill ho...
Balanced to G6.3 20,000RPM
Under 0.01mm run out at 3xD
Maximum torque power clamping
Ideal for rough or indexable milling as well as high speed finishing
For direct clamping or use with sleeves
AD through coolant
AT3 taper tolerance for highest spindle rigidity
Clamping torque ranging from 980Nm - 3,430Nm depending on clamping diameter
High speed premium YG-1 milling chuck are balanced to G6.3 20,000RPM for high speed machining. These chucks offer an extremely versatile clamping option compared to traditional methods eg. end mill ho...
Balanced to G6.3 20,000RPM
Under 0.01mm run out at 3xD
Maximum torque power clamping
Ideal for rough or indexable milling as well as high speed finishing
For direct clamping or use with sleeves
AD through coolant
AT3 taper tolerance for highest spindle rigidity
Clamping torque ranging from 980Nm - 3,430Nm depending on clamping diameter
High speed premium YG-1 milling chuck are balanced to G6.3 20,000RPM for high speed machining. These chucks offer an extremely versatile clamping option compared to traditional methods eg. end mill ho...
Balanced to G6.3 20,000RPM
Under 0.01mm run out at 3xD
Maximum torque power clamping
Ideal for rough or indexable milling as well as high speed finishing
For direct clamping or use with sleeves
AD through coolant
AT3 taper tolerance for highest spindle rigidity
Clamping torque ranging from 980Nm - 3,430Nm depending on clamping diameter
High speed premium YG-1 milling chuck are balanced to G6.3 20,000RPM for high speed machining. These chucks offer an extremely versatile clamping option compared to traditional methods eg. end mill ho...
Balanced to G6.3 20,000RPM
Under 0.01mm run out at 3xD
Maximum torque power clamping
Ideal for rough or indexable milling as well as high speed finishing
For direct clamping or use with sleeves
AD through coolant
AT3 taper tolerance for highest spindle rigidity
Clamping torque ranging from 980Nm - 3,430Nm depending on clamping diameter
YG-1 premium milling chucks offer an extremely versatile clamping option compared to traditional methods eg. end mill holders/side lock arbors. You are able to clamp various diameters via the use of m...
YG-1 premium milling chucks offer an extremely versatile clamping option compared to traditional methods eg. end mill holders/side lock arbors. You are able to clamp various diameters via the use of m...
High speed premium YG-1 milling chuck are balanced to G6.3 20,000RPM for high speed machining. These chucks offer an extremely versatile clamping option compared to traditional methods eg. end mill ho...
Balanced to G6.3 20,000RPM
Under 0.01mm run out at 3xD
Maximum torque power clamping
Ideal for rough or indexable milling as well as high speed finishing
For direct clamping or use with sleeves
AD through coolant
AT3 taper tolerance for highest spindle rigidity
Clamping torque ranging from 980Nm - 3,430Nm depending on clamping diameter
High speed premium YG-1 milling chuck are balanced to G6.3 20,000RPM for high speed machining. These chucks offer an extremely versatile clamping option compared to traditional methods eg. end mill ho...
Balanced to G6.3 20,000RPM
Under 0.01mm run out at 3xD
Maximum torque power clamping
Ideal for rough or indexable milling as well as high speed finishing
For direct clamping or use with sleeves
AD through coolant
AT3 taper tolerance for highest spindle rigidity
Clamping torque ranging from 980Nm - 3,430Nm depending on clamping diameter
High speed premium YG-1 milling chuck are balanced to G6.3 20,000RPM for high speed machining. These chucks offer an extremely versatile clamping option compared to traditional methods eg. end mill ho...
Balanced to G6.3 20,000RPM
Under 0.01mm run out at 3xD
Maximum torque power clamping
Ideal for rough or indexable milling as well as high speed finishing
For direct clamping or use with sleeves
AD through coolant
AT3 taper tolerance for highest spindle rigidity
Clamping torque ranging from 980Nm - 3,430Nm depending on clamping diameter
High speed premium YG-1 milling chuck are balanced to G6.3 20,000RPM for high speed machining. These chucks offer an extremely versatile clamping option compared to traditional methods eg. end mill ho...
Balanced to G6.3 20,000RPM
Under 0.01mm run out at 3xD
Maximum torque power clamping
Ideal for rough or indexable milling as well as high speed finishing
For direct clamping or use with sleeves
AD through coolant
AT3 taper tolerance for highest spindle rigidity
Clamping torque ranging from 980Nm - 3,430Nm depending on clamping diameter
These milling chucks from Wulf have a SK40 taper and are balanced to 25,000RPM G2.5 for high speed machining. They offer an extremely versatile clamping option compared to traditional methods eg. end ...
Balanced to 25,000RPM G2.5
Robust design for heavy milling
Can be used with sleeves for smaller diameter shanks
