Free Next Day Delivery
on orders over £59 ex vat*

Expert Technical Team
Get advice on 01924 869 615

Same Day Despatch
On orders placed up to 5.45pm

Tool Changer Arm Positioning Kits

Tool Changer Arm Positioning Kits

Filter By arrow
carrat-down

7 Items

Sort By
carrat-down
sort-descending
  • BT40 positioning device for tool changer arms
  • Control pin also included for spindle realignment
  • Supplied in aluminium case
  • High quality from Italy
  • Instructions for use: 1. After assembling the usual pull stud,insert the cone into the spindle manually. 2. Set up the flange into the tool changer arm and go closer to the spindle. 3. After positioning, try to insert the double-diameter control pin between the two pieces. Adjust the arm accordingly until you get the perfect coaxiality so that the control bar enters the flange and the cone holes with no interferences.

From £1,226.56 £1,022.13

Capto compatible C6 Positioning device for tool changer arms. Supplied in Aluminium case....

  • Capto compatible C6 positioning device for tool changer arms
  • Supplied in aluminium case
  • High quality from Italy
  • Instructions for use: 1. After assembling the usual pull stud,insert the cone into the spindle manually. 2. Set up the flange into the tool changer arm and go closer to the spindle. 3. After positioning, try to insert the double-diameter control pin between the two pieces. Adjust the arm accordingly until you get the perfect coaxiality so that the control bar enters the flange and the cone holes with no interferences.

From £1,112.95 £927.46

BT40 Positioning device for tool changer arms. Supplied in Aluminium case....

  • BT40 positioning device for tool changer arms
  • Supplied in aluminium case
  • High quality from Italy
  • Instructions for use: 1. After assembling the usual pull stud,insert the cone into the spindle manually. 2. Set up the flange into the tool changer arm and go closer to the spindle. 3. After positioning, try to insert the double-diameter control pin between the two pieces. Adjust the arm accordingly until you get the perfect coaxiality so that the control bar enters the flange and the cone holes with no interferences.

From £824.09 £686.74

BT50 Positioning device for tool changer arms. Supplied in Aluminium case....

  • BT50 positioning device for tool changer arms
  • Supplied in aluminium case
  • High quality from Italy
  • Instructions for use: 1. After assembling the usual pull stud,insert the cone into the spindle manually. 2. Set up the flange into the tool changer arm and go closer to the spindle. 3. After positioning, try to insert the double-diameter control pin between the two pieces. Adjust the arm accordingly until you get the perfect coaxiality so that the control bar enters the flange and the cone holes with no interferences.

From £1,045.45 £871.21

HSK100A Positioning device for tool changer arms. Supplied in Aluminium case....

  • HSK100A positioning device for tool changer arms
  • Supplied in aluminium case
  • High quality from Italy
  • Instructions for use: 1. After assembling the usual pull stud,insert the cone into the spindle manually. 2. Set up the flange into the tool changer arm and go closer to the spindle. 3. After positioning, try to insert the double-diameter control pin between the two pieces. Adjust the arm accordingly until you get the perfect coaxiality so that the control bar enters the flange and the cone holes with no interferences.

From £1,523.65 £1,269.71