Carbide Machine Reamers
Produces high tolerance holes for machining through & blind holes. O.D. Tolerance DIN1420 for H7. Suitable for reaming Steel, Stainless Steel, Cast Iron and Non-Ferrous materials.
Carbide reamers give increased wear resistance and tool life over HSS
- O.D. Tolerance DIN1420 for H7
- Produces high tolerance holes
- For Machining Through & Blind Holes
- Suitable for reaming Steel, Stainless Steel, Cast Iron and Non-Ferrous materials.
- Improved surface finish
- Carbide Reamer for Hardened Steel up to 67Hrc - 22.1490 Series (Karnasch)The 22.1490 series karnasch hardened steel reamer is ideal for reaming operations on high hardness materials up to 67 Rockwell.
- H
- Miniature Carbide Reamer - 22.1452 Series (Karnasch)The 22.1452 series karnasch miniature reamer is ideal for reaming small sized holes with sizes ranging from just 0.8mm up to 3.03mm. These can be used on Steel (up to 45 Rockwell), Stainless Steel, Ca ... read more >
- P
- M
- K
- N
- Miniature Long Neck Carbide Reamer - 22.1450 Series (Karnasch)The 22.1450 series karnasch miniature reamer is ideal for reaming microscopic sized holes with sizes ranging from just 0.2mm up to 0.595mm. These can be used on Steel (up to 45 Rockwell), Stainless St ... read more >
- P
- M
- K
- S
- N
- HNC-VA (Inox) Carbide Straight Flute Through Coolant Reamer for Blind Holes - 043271 Series (Beck)The Beck HNC-VA carbide reamers are excellent for high performance reaming operations on Stainless Steel (also suitable for some steels). The 043271 series come with a through coolant hole and a strai ... read more >Beck HNC-VA (Inox) series carbide machine reamer
Straight flute geometry for blind holes
Through coolant available
High performance ... read more >- P
- M
- HNC-Speed Carbide Straight Flute Through Coolant Reamer for Blind Holes - 043261 Series (Beck)The Beck HNC-Speed carbide reamers are excellent for high performance reaming operations on Steel and Cast Iron materials. The 043261 series comes with a through coolant hole and a straight flute geom ... read more >Beck HNC-Speed series carbide machine reamer
Straight flute geometry for blind holes
Through coolant available
High performance BSP ... read more >- P
- K
- HNC-VA (Inox) Carbide Spiral Flute Through Coolant Reamer for Through Holes - 043270 Series (Beck)The Beck HNC-VA carbide reamers are excellent for high performance reaming operations on Stainless Steel (also suitable for some steels). The 043270 series come with a through coolant hole and a spira ... read more >Beck HNC-VA (Inox) series carbide machine reamer
Spiral flute geometry for through holes
Through coolant available
High performance ... read more >- P
- M
- HNC-Speed Carbide Spiral Flute Through Coolant Reamer for Through Holes - 043260 Series (Beck)The Beck HNC-Speed carbide reamers are excellent for high performance reaming operations on Steel and Cast Iron materials. The 043260 series come with a through coolant hole and a spiral flute geometr ... read more >Beck HNC-Speed series carbide machine reamer
Spiral flute geometry for through holes
Through coolant available
High performance BSP ... read more >- P
- K
- Solid Carbide Spiral Flute Machine Reamer in 0.01mm Increments (Beck)Beck Solid Carbide Machine Reamers are available in 0.1mm increments from 1-12mm. These spiral flute reamers have a high level of hardness and good heat resistance to allow for high performance reamin ... read more >Solid Micrograin Carbide
Chucking Machine Reamer
For Machining Steel, Stainless Steel, Titanium, Cast Iron & Non-Ferrous
Parralel Sh ... read more >- P
- M
- K
- N
- Left Hand Spiral Flute Carbide NC Machine Reamer - K4111 (YG-1)The YG-1 K4111 series Reamer has a solid micrograin carbide substrate with sizes ranging from 2-20mm diameter. These come with whole number shanks making them ideal for clamping within hydraulic chuck ... read more >Solid Micrograin Carbide
NC Machine Reamer
For Machining Steel, Stainless Steel, Titanium, Cast Iron & Non-Ferrous
O.D. Tolerance DI ... read more >- P
- M
- K
- N
- Straight Flute Carbide NC Machine Reamer - K4101 (YG-1)The YG-1 K4101 series Reamer has a solid micrograin carbide substrate with sizes ranging from 2-20mm diameter. These come with whole number shanks making them ideal for clamping within hydraulic chuck ... read more >Solid Micrograin Carbide
NC Machine Reamer
For Machining Steel, Stainless Steel, Titanium, Cast Iron & Non-Ferrous
O.D. Tolerance DI ... read more >- P
- M
- K
- N