The 2 flute HSS-XE 180° Subland Drill for Socket-Head Screws is made from high-alloyed steel XE for considerably longer tool life. Features a TITAN-TEC coating for further substancial tool life when ...
TITAN-TEC coating for increased tool life when dry machining
Made of high-alloyed special steel XE
Very sturdy and tight concentricity between drill and counterbore guarantee exact allignment
For through holes for screws to DIN-ISO 273 and countersinking DIN 74 sheet 2 form H, J, K medium grade
Suitable for Steel, Stainless Steel, Cast Iron & Non-Ferrous materials
The 2 Flute HSS-XE 180°, Subland Drills from Karnasch is used for countersinking/counterboring in 1 hit. The tool is made of high-alloyed special steel XE for considerably longer service life than HS...
Drill & countersink/counterbore in 1 hit
Medium (180 degree;) Geometry
Uncoated HSS-XE
High-alloyed chromium steel such as stainless (V2A)
Drill and counterbore each with its own chip flutes and guide chamfers. This means it can be reground many times
Suitable for Steel, Cast Iron & Non-Ferrous Metals
The 2 Flute HSS-XE 180°, Subland Drills from Karnasch is used for countersinking/counterboring in 1 hit. The tool is made of high-alloyed special steel XE for considerably longer service life than HS...
Drill & countersink/counterbore in 1 hit
Medium (180 degree;) Geometry
Uncoated HSS-XE
High-alloyed chromium steel such as stainless (V2A)
Drill and counterbore each with its own chip flutes and guide chamfers. This means it can be reground many times
Suitable for Steel, Cast Iron & Non-Ferrous Metals
The 2 Flute HSS-XE 90°, Subland Drills from Karnasch is used for countersinking/counterboring in 1 hit.The tool is made of high-alloyed special steel XE for considerably longer service life than HSS-...
Drill & countersink/counterbore in 1 hit
Medium (180 degree;) Geometry
Uncoated HSS-XE
High-alloyed chromium steel such as stainless (V2A)
Drill and counterbore each with its own chip flutes and guide chamfers. This means it can be reground many times
Suitable for Steel, Cast Iron & Non-Ferrous Metals
The 2 Flute HSS-XE 90° Subland Drills from Karnasch is used for drilling and counterboring various materials with its own chip flute and guide chamfers. This means it can be reground many times. Made...
Drill and counterbore each with its own chip flutes and guide chamfers. This means it can be reground many times
Made of high-alloyed special steel XE
Fine 90 degree Geometry
Suitable for Steel, Stainless Steel, Cast Iron & Non-Ferrous materials
TITAN-TEC coating for substancial increase in service life when machining dry
The 2 Flute HSS-XE 180° Subland Drills from Karnasch is used for drilling and counterboring various materials with its own chip flute and guide chamfers. This means it can be reground many times. Mad...
Drill and counterbore each with its own chip flutes and guide chamfers. This means it can be reground many times
Made of high-alloyed special steel XE
Medium 180 degree Geometry
Suitable for Steel, Stainless Steel, Cast Iron & Non-Ferrous materials
TITAN-TEC coating for substancial increase in service life when machining dry
The 2 Flute HSS-XE 90° Subland Drills from Karnasch is used for drilling and counterboring various materials with its own chip flute and guide chamfers. This means it can be reground many times. Made...
Drill and counterbore each with its own chip flutes and guide chamfers. This means it can be reground many times
Made of high-alloyed special steel XE
Countersink 90 degree Geometry
Suitable for Steel, Stainless Steel, Cast Iron & Non-Ferrous materials
TITAN-TEC coating for substancial increase in service life when machining dry
The 2 flute HSS-XE 90° Subland Drill for Countersunk Screws is made from high-alloyed steel XE for considerably longer tool life. Particulary suitable for NC machines due to high positional accuracy,...
Made of high-alloyed special steel XE
For use on NC machines due to high positional accuracy
Excellent centering properties and great sturdiness
Very sturdy and tight concentricity
Tolerences between drill and counterbore guarentee exact alignment
For through holes for screws to DIN-ISO 273 and countersinksto DIN 74 sheet 1 form A fine grade
Suitable for Steel, Stainless Steel, Cast Iron & Non-Ferrous materials
The 2 flute HSS-XE 180° Subland Drill for Socket-Head Screws is made from high-alloyed steel XE for considerably longer tool life. Very sturdy and tight concentricity tolerances between drill Ø and ...
Made of high-alloyed special steel XE
Very sturdy and tight concentricity between drill and counterbore guarantee exact allignment
For through holes for screws to DIN-ISO 273 and countersinking DIN 74 sheet 2 form H, J, K medium grade
Suitable for Steel, Stainless Steel, Cast Iron & Non-Ferrous materials
The 2 flute HSS-XE 180° Subland Drill for Countersunk Screws is made from high-alloyed steel XE for considerably longer tool life. Very sturdy and tight concentricity tolerances between drill Ø and ...
TITAN-TEC coating for increased tool life when dry machining
Made of high-alloyed special steel XE
For use on NC machines due to high positional accuracy
Excellent centering properties and great sturdiness
Very sturdy and tight concentricity
Tolerences between drill and counterbore guarentee exact alignment
For through holes for screws to DIN-ISO 273 and countersinksto DIN 74 sheet 1 form A fine grade
Suitable for Steel, Stainless Steel, Cast Iron & Non-Ferrous materials
The 2 flute HSS-XE 90° Countersink Subland Drill is made from high-alloyed steel XE for considerably longer tool life. Hole and countersink are produced in one operation and precisely aligned. Theref...
Made of high-alloyed special steel XE for longer tool life
Hole and countersink are produced in one operation and precisely aligned.
Very sturdy and tight concentricity tolerances.
Particulary suitable for NC machines due to high positional accuracy, excellent centering properties and great sturdiness.
For thread tapping drill holes to DIN 336 sheet 1 with 90 degree countersink.
Suitable for: Steel, Stainless Steel, Cast Iron & Non-Ferrous materials
The 2 flute HSS-XE 90° Subland Drill for through holes is made from high-alloyed steel XE for considerably longer tool life. For through holes for screws DIN-ISO 273 and countersinks to DIN 74, sheet...
Made of high-alloyed special steel XE for longer tool life
For through holes for screws DIN-ISO 273 and countersinks to DIN 74, sheet 1 form A, medium grade.
For screws to ISO 2009, 2010, 7047 (DIN 963, 964, 966).
Suitable for: Steel, Stainless Steel, Cast Iron & Non-Ferrous materials
The 2 flute HSS-XE 90° Titan-Tec coating Subland Drill is made from high-alloyed steel XE for considerably longer tool life. Hole and countersink are produced in one operation and precisely aligned, ...
Made of high-alloyed special steel XE for longer tool life
Hole and countersink are produced in one operation and precisely aligned.
For thread tapping drill holes to DIN 336 sheet 1 with 90 degree countersink.
Very sturdy and tight concentricity tolerances.
Particulary suitable for NC machines due to high positional accuracy, excellent centring properties and great sturdiness.
The preceding centring operation can thus often be omitted.
The tap does not have to cut into the sharp edge of the hole
Suitable for: Steel, Stainless Steel, Cast Iron & Non-Ferrous materials
The 2 flute HSS-XE 90° Titan-Tec coating Subland Drill is made from high-alloyed steel XE for considerably longer tool life. Especially suitable for holes with simultaneous countersinking in profile ...
Made of high-alloyed special steel XE for longer tool life
For through holes for screws DIN-ISO 273 and countersinks to DIN 74, sheet 1 form A, medium grade.
For screws to ISO 2009, 2010, 7047 (DIN 963, 964, 966).
Especially suitable for holes with simultaneous countersinking in profile material.
