Mould Release Oils & Sprays - Anti-Seize, Assembly & Dismantling

A low viscosity mould oil formulated from a single base oil and an additive system ideal for effective mould oil release, primarily concrete and ceramic....

Use as received according to the application or mixed as an emulsion for specific mould types. Apply by brush, roller or spray as desired.
Ease of application plus enhanced mould release for blemish free products.
Readily biodegradable.
Suitable for a variety of moulds.
Mould Oil 2437 is a biodegradable, low viscosity mould release oil for fine finish products.
Mould Oil 2437 can be safely used with plastic, metal and rubber moulds and is particularly suitable for situations where an excellent finish is desired.
Can be applied by brush, roller or spray.
A low viscosity mould oil formulated from a single base oil and an additive system ideal for effective mould oil release, primarily concrete and ceramic.

From £85.62 £71.35

View Products

Mould Oil 2334 Medium Viscosity (Millers Oils)

Mould Oil 2334 is a medium viscosity mould release oil for fine finish products....

Excellent surface finish
For fine finish products
Excellent mould separation
Suitable for a variety of moulds

From £78.44 £65.37

View Products

Mould Oil 1954 (Millers Oils)

A blend of low volatility solvent carrier and base oil with additive treatment to assist with release properties....

Use as received according to the application or mixed as an emulsion for specific mould types. Apply by brush, roller or spray as desired.
Good surface finish.
Good separation properties.
Improved operator acceptability with the addition of a reodourant.
Cost effective.
A blend of low volatility solvent carrier and base oil with additive treatment to assist with release properties.

From £85.07 £70.89

View Products

Mould Oil 1755 (Millers Oils)

A light viscosity hydrocarbon blended with mineral oil and release agent additives to promote good mould separation and minimize creep and surface migration....

Use as received according to the application or mixed as an emulsion for specific mould types. Apply by brush, roller or spray as desired.
Good surface finish.
Good separation properties.
Improved operator acceptability with the addition of a reodourant.
Cost effective.
A light viscosity hydrocarbon blended with mineral oil and release agent additives to promote good mould separation and minimize creep and surface migration.

From £75.66 £63.05

View Products

PR Spray for Silicone Mould Release

Our mould release agents give fast, efficient and clean release of all types of plastics and rubbers. They provide faithful reproduction of the mould profile however complex the mould or minute the de...

Available in a 400ml spray size.
Long lasting silicone mould release.
Release agent where silicones can be tolerated.
Wet film promotes gloss finish.
Ultra fine even film gives controlled application with complete coverage.
Suitable up to 200°C.
Our mould release agents give fast, efficient and clean release of all types of plastics and rubbers.
They provide faithful reproduction of the mould profile however complex the mould or minute the detail.
They are commonly used in injection and compression mouldings, as well as extrusion and glass fibre lay up work.
ROCOL is a market leader in cutting performance and dilution which means our cutting fluids and your tools last longer.

From