Gerardi Classic Line Angle Heads
Compact and rigid design, case hardened with ground shank and shaft
Gerardi Virtual Showroom
Automatic Tool Change
90° StandardClassic Line Angle Heads
- The original Gerardi Angle Head
- Available in ER11-ER32
90° LightweightClassic Line Angle Heads
- Lightweight aluminium housing
- Available in ER11-ER25
Exceptional tool life guaranteed
Gerardi's Classic Line angle heads offer a compact and rigid design with an integral case hardened and ground shank and shaft. Classic Line angle heads are readily available from stock on short delivery times and can be supplied for automatic or manual tool change machines.
ATC Series
Designed to be used on machining centres and can be automatically transferred from the tool magazine to the machine spindle and back. ATC angle heads ensure that the main input shaft is integral with the drive taper to ensure maximum rigidity.
Â
MTC Series
Designed for traditional machine tools with a flange attachment. The modular system makes it possible to extend the length of the body by adding a spacer.
Features
High performance
High machining speeds
Reliable and affordable
Exceptional tool life guaranteed
100% Italian Made
Supplied with 1 Year Warranty
- Minimum thermal expansion and high corrosion resistant treated steel body
- Main shaft is one solid piece with the drive input taper, case hardened and ground, to ensure maximum rigidity
- Shafts supported by sets of super precision pre-loaded angular contact bearings with Long Life grease
lubrification and ABEC 9 accuracy rating - Ground spiral bevel gears in the highest performance materials able to guaranteed less warming and noise and the highest Rpm.
Computerized computation of the data of the set gears more than one tooth working during mesch, more power transmitted,
longer gear life, almost no noise - New types of longer angular heads with reduced weights and owerall dimensions
- Double seals on the front (mechanical seal + gasket)
- External coolant through the pin and internal air pressure included as a standard option. (a) Internal coolant feed through the tool options: - 10 bar through rotating distributor (b) From 30 to 70 bar through machine spindle, dry running not possible (c) Special ReCool nuts to get the internal coolant through the tool evenon angle heads that aren’t fitted for this option.
- High speed until 10.000 rpm
- 100% compatibility with heads installed during the last 40 years (same anti-rotation/arrester pin and stop block dimensions)
- GERARDI Classic angle heads have been designed and are manufactured in Italy
ATC G90 Series
Ideal for drilling, milling and tapping
at ±90°.
ATC G90L Series
Long series for deep machining applications.
ATC G90B Series
Coolant input from positioning pin and output though the tool.
ATC GMU Series
Adjustable output at 0° to 90° for tilt drilling, milling and tapping.
MTC G90 Series
Ideal for drilling, milling and tapping at 0° to 90°.
MTC G90L Series
Long series for deep machining applications.
MTC G90B Series
Adjustable output at 0° to 90° for tilt drilling, milling and tapping.
MTC GMU S40/S50 Series
Tool output adjustable on 360° with free positioning.
Accessories
Collets
ER-DIN 6499 / ET1
Nuts
ER-DIN 6499 / ET1
Wrench
ES (Exagonal)
STD (Standard)
Integral Shank
& Shaft
Case hardened and ground shank and shaft. Made as one solid piece.
Stop Block
Avoids the rotation of the angle head and ensures perfect stability.
Universal Flange
Used for the interface between the MTC angle head and the machine spindle.
Exensions
Extend the length of MTC angle head bodies by adding an extension.
sPDF Download
Gerardi Angle Heads
Don't have an account?
Creating an account has many benefits: check out faster, keep more than one address, track orders and more.
Or
Checkout as a Guest
Place your order without creating an account for extra convenience.